Engine mechanism - Valve clearanceThickness of new valve lifterThickness of old valve liftereasured valve clearance(g) As sequences shown in the diagram, loosen camshaft
bearing cover bolts on intake camshaft at several times
and remove the bearing cover at the same time.
(h) Hold timing chain with hands and then remove the
camshaft.
(i) As shown in the diagram, tie up the chain with bandage.
Note: be careful not to let anything fall into the
timing chain hood.
(j) Remove valve lifter.
(k) Measure the thickness of this valve lifter with
micrometer.
(1) Calculate the thickness of new valve tappet and
adjust valve clearance within specification.: Exhaust: Hints:New valve tappet chosen should be near the value cal-
culated as much as possible.The thickness of valve tappet is from 5.06mm to 5.74mm,
and there is one specification every 0.02mm, therefore
there are totally 35 different dimensions to chose.
(m) As shown in the diagram, align alignment mark with tim-
ing mark on camshaft timing sprocket, and install timing
chain on the timing sprocket. 32Timing remarkchain linkTiming mark
