2008 CHEVROLET AVALANCHE Owners Manual

Page 129 of 528

CHEVROLET AVALANCHE 2008 2.G Owners Manual Shifting Out of Park
This vehicle is equipped with an electronic shift lock
release system. The shift lock release is designed to:
Prevent ignition key removal unless the shift
lever is in PARK (P) w

Page 130 of 528

CHEVROLET AVALANCHE 2008 2.G Owners Manual Engine Exhaust
{CAUTION:
Engine exhaust can kill. It contains the gas
carbon monoxide (CO), which you cannot see or
smell. It can cause unconsciousness and death.
You might have exhaust coming in if:

Page 131 of 528

CHEVROLET AVALANCHE 2008 2.G Owners Manual {CAUTION:
It can be dangerous to get out of your vehicle
if the shift lever is not fully in PARK (P) with
the parking brake �rmly set. Your vehicle can
roll. Do not leave your vehicle when the engine

Page 132 of 528

CHEVROLET AVALANCHE 2008 2.G Owners Manual Temperature and Compass Display
Press the on/off button, located on the far left of the
mirror face, to turn the compass/temperature display
on or off.
If the display reads CAL, the compass needs to b

Page 133 of 528

CHEVROLET AVALANCHE 2008 2.G Owners Manual To adjust for compass variance, do the following:
1. Find your current location and variance zone
number on the following zone map.
2. Press and hold the on/off button until a Z and a
zone number appe

Page 134 of 528

CHEVROLET AVALANCHE 2008 2.G Owners Manual Cleaning the Mirror
When cleaning the mirror, use a paper towel or similar
material dampened with glass cleaner. Do not spray
glass cleaner directly on the mirror as that may cause
the liquid cleaner

Page 135 of 528

CHEVROLET AVALANCHE 2008 2.G Owners Manual Compass Operation
Press the COMP button once brie�y to turn the compass
on or off.
When the ignition is started and the compass feature is
on, the compass will show two character boxes for
approximate

Page 136 of 528

CHEVROLET AVALANCHE 2008 2.G Owners Manual To adjust for compass variance:
1. Find your current location and variance zone
number on the following zone map.
2. Press and hold the COMP button for �ve seconds
until a zone number appears in the d