2008 BMW 650I CONVERTIBLE Owner's Manual

Page 33 of 264

BMW 650I CONVERTIBLE 2008 E64 Owners Manual Controls
 31Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Press the button twice to unlock the 
entire vehicle.
9.Press the controller.
Comfort opening mode
Press

Page 34 of 264

BMW 650I CONVERTIBLE 2008 E64 Owners Manual Opening and closing
32 If it is no longer possible to lock the vehicle 
using the remote control, then the battery is 
discharged. Use this remote control during an 
extended drive; this will recharge

Page 35 of 264

BMW 650I CONVERTIBLE 2008 E64 Owners Manual Controls
 33Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
3.Select "Settings" and press the controller.
4.Select "Vehicle / Tires" and press the con-
troller.
5.C

Page 36 of 264

BMW 650I CONVERTIBLE 2008 E64 Owners Manual Opening and closing
34
Doors
Automatic soft closing*
To close the doors, merely push them gently. 
The closing process will then be carried out 
automatically.
Make sure that the closing path of the

Page 37 of 264

BMW 650I CONVERTIBLE 2008 E64 Owners Manual Controls
 35Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Emergency release
Pull the lever in the luggage compartment. 
The luggage compartment lid is unlocked.
L

Page 38 of 264

BMW 650I CONVERTIBLE 2008 E64 Owners Manual Opening and closing
36
Indicator lamp displays
>The indicator lamp below the interior rear-
view mirror flashes continuously: the sys-
tem is armed.
>The indicator lamp flashes after locking: the 
doo

Page 39 of 264

BMW 650I CONVERTIBLE 2008 E64 Owners Manual Controls
 37Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
>The next unlocking and locking cycle is not 
possible until after approx. 2 seconds.
>The engine can on

Page 40 of 264

BMW 650I CONVERTIBLE 2008 E64 Owners Manual Opening and closing
38
Starting engine
You can start the engine or switch on the igni-
tion if a remote control is located in the interior 
of the vehicle. It need not be inserted in the igni-
tion lo