2008.5 Citroen C3 PICASSO DAG Owner's Manual

141

MODELS:
ENGINES AND GEARBOXES

Model codes:
SH ...
9HXC 9HZC

DIESEL ENGINES
HDi 90 HDi 110 PEF
Cubic capacity (cm 3
) 1 560 1 560
Bore x stroke (mm) 75 x 88.3 75 x 88.3
Max power: EU standard (kW) 66 80
Max power engine speed (rpm) 4 000 4 000
Max torque: EU standard (Nm) 215 240
Max torque engine speed (rpm) 1 750 1 750
Fuel Diesel Diesel
Catalytic converter yes yes
Particle emission fi lter no yes

OIL CAPACITIES (in litres)
Engine (with cartridge replacement) 3.25 3.25
Gearbox - Final drive 1.9 1.9

139
Quality of the fuel used for petrol engines
CONSUMPTION In accordance with directive 80/1268/CEE

Petrol engines
Model codes:
SH ...(a)

Urban driving mpg
(litres/100 km)
Inter-urban
driving mpg
(litres/100 km)
Mixed driving mpg
(litres/100 km)
Emission of CO
2
by weight (g/km)

VTi 95
8FSC 30.7 (9.2) 50.4 (5.6) 40.9 (6.9) 159

8FSC/1 31.0 (9.1) 51.4 (5.5) 41.5 (6.8) 157

VTi 120
5FW0 29.7 (9.5) 50.4 (5.6) 40.4 (7.0) 163

5FW0/1 30.1 (9.4) 51.4 (5.5) 40.9 (6.9) 159
(a) .../1 : fi tted with low rolling resistance tyres to reduce consumption and emissions of CO
2.
The petrol engines are perfectly compatible with E5 type pet rol biofuels (containing 5 % ethanol), conforming to European
standard EN 228.
E85 type fuels (containing up to 85 % ethanol) are reserved e xclusively for vehicles marketed for the use of this type of fuel
(BioFlex vehicles). The quality of the ethanol must comply with European standard EN 15376.
For Brazil only, special vehicles are marketed to run on fuels co ntaining up to 100 % ethanol (type E100).
The consumption fi gures shown here correspond to the values commu
nicated at the time of printing.
These consumption values were established in accordance with Di rective 80/1268/CEE. They may vary depending on the
style of driving, traffi c conditions, weather conditions, the load in the vehicle, the maintenance of the vehicle and the use of
accessories.

(a) .../1: fi tted with low rolling resistance tyres to reduce consumption and emissions of CO
2.

CONSUMPTION In accordance with directive 80/1268/CEE

Diesel engines
Model codes
SH ...(a)

Urban driving mpg
(litres/100 km)
Inter-urban
driving mpg
(litres/100 km)
Mixed driving mpg
(litres/100 km)
Emission of CO
2
by weight (g/km)

HDi 90
9HXC 46.3 (6.1) 68.9 (4.1) 58.9 (4.8) 128

9HXC/1 42.1 (6.0) 69.7 (4.0) 60.1 (4.7) 125

HDi 110 PEF
9HZC 43.5 (6.5) 67.3 (4.2) 56.5 (5.0) 133

9HZC/1 44.1 (6.4) 68.9 (4.1) 57.6 (4.9) 130
Quality of the fuel used for Diesel engines
The Diesel engines are perfectly compatible with biofuels w hich conform to current and future European standards (diesel
fuel which complies with standard EN 590 mixed with a biofuel which complies with standard EN 14214) which can be distributed
at the pumps (possible incorporation of 0 to 7 % Fatty Acid Met hyl Ester).
The use of any other type of (bio) fuel (vegetable or animal oils, domestic fuel...) is strictly prohibited (risk of damage to the
engine and fuel circuit).
The consumption fi gures shown here correspond to the values commu
nicated at the time of printing.
These consumption values were established in accordance with Di rective 80/1268/CEE. They may vary depending on the
style of driving, traffi c conditions, weather conditions, the load in the vehicle, the maintenance of the vehicle and the use of
the accessories.

140
* The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an
equal amount; warning, towing using a lightly loaded to wing vehicle may have an adverse effect on its road holding.

WEIGHTS AND TOWED LOADS (in kg)

Petrol engines
VTi 95 VTi 120

Model codes:
SH ...
8FSC 5FW0
- Unladen weight 1 259 1 290
- Kerb weight 1 334 1 365
- Payload 483 463
- Gross vehicle weight (GVW) 1 742 1 753
- Gross train weight (GTW)
on a 12 % gradient 2 592 2 603
- Braked trailer (within GTW limit)
on a 10 % or 12 % gradient 850 850
- Braked trailer * (with load transfer within the GTW limit) 1 100 1 100
- Unbraked trailer 650 675
- Recommended nose weight 54 54
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mention ed
must be reduced by 10 % for each additional 1 000 metres of a ltitude.
The speed of a towing vehicle must not exceed 60 mph (100 k m/h) (comply with the legislation in force in your country).
High exterior temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the
exterior temperature is above 37 °C, limit the towed load .

143
* The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an
equal amount; warning, towing using a lightly loaded to wing vehicle may have an adverse effect on its road holding.

WEIGHTS AND TOWED LOADS (in kg)

Diesel engines
HDi 90 HDi 110 PEF

Model codes:
SH ...
9HXC 9HZC
- Unladen weight 1 289 1 333
- Kerb weight 1 364 1 408
- Payload 482 462
- Gross vehicle weight (GVW) 1 771 1 795
- Gross train weight (GTW)
on a 12 % gradient 2 971 2 745
- Braked trailer (within GTW limit)
on a 10 % or 12 % gradient 1 200 950
- Braked trailer * (with load transfer with the GTW limit) 1 200 1 200
- Unbraked trailer 675 675
- Recommended nose weight 54 54
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mention ed
must be reduced by 10 % for each additional 1 000 metres of a ltitude.
The speed of a towing vehicle must not exceed 60 mph (100 k m/h) (comply with the legislation in force in your country).
High exterior temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the
exterior temperature is above 37 °C, limit the towed load .

144
DIMENSIONS (IN MM)

i
145
IDENTIFICATION FEATURES
Various visible marking elements for the identifi cation and tracking of your vehicle.
If the infl ation pressure is too low,
this increases fuel consumption.
The infl ation pressure must be
checked when the tyres are cold,
at least once a month.

A. Chassis number on the front right
pillar.
This number is etched on the bodywork
near the hinge.
To gain access to it, open the right-hand
door.
B. Chassis number on the wind-
screen lower crossmember.
This number is indicated on a gummed
label which is visible through the wind-
screen.

C. Manufacturer’s label.
This number is indicated on a self-
destroying label affi xed to the centre
pillar, on the left-hand side.
D. Tyre/paint label.
This label is affi xed to the centre pillar,
on the left-hand side.
It bears the following information:
- the tyre infl ation pressures with and without load,
- the wheel rim and tyre sizes,
- the brands of tyre recommended by the manufacturer,
- the infl ation pressure of the spare wheel,
- the paint colour reference.

146
MyWay is protected in such a way that it will only operate in your vehicle. If it is to be installed in another vehicle, contact a CITROËN dealer for confi guration of the in your vehicle. If it is to be installed in another vehice. If it i
system.
Certain functions described in this handbook will become available during the course of the year.
MyWay
CONTENTS