2007 VOLVO XC90 rear view mirror

2007 Volvo XC90
Power windows in the rear doors
The rear door windows can be operated with the control on each door and \
the switch on the driver's
door. If the light in the switch for blocking power windows in the rear \
doors (located in the driver's door
control panel) is on, the rear door windows can only be operated from t\
he driver's door.
pg. 70 Instruments and controls
Rearview mirror/power folding sideview mirrors
Rearview mirror
To reduce glare from the headlights of following vehicles, use the contr\
ol to switch between the normal
and night-driving positions.
A. Normal position
B. Night position, reduces glare from following headlights
Autodim function (option)
The autodim function reacts to headlights from following traffic and aut\
omatically reduces glare.
file:///K|/ownersdocs/2007/2007_XC90/07xc90_02.htm (33 of 40)12/30/200\
6 5:53:37 PM

2007 Volvo XC90
NOTE: This function is automatically switched off when the gear selector is p\
laced in the Reverse
position.
Rearview mirror with compass (option)
The upper left-hand corner of the rearview mirror has an integrated disp\
lay that shows the compass
direction toward which the car is pointing. Eight different directions c\
an be displayed: N, NE, E, SE, S,
SW, W and NW. The display shows your car's orientation with respect to t\
rue north.
If the compass is activated, it will be displayed automatically when the\
ignition is in postilion II or when
the engine is running. The compass can be switched off or on by pressing\
the inset button on the rear
side of the mirror (see the inset illustration). This can be done with\
straightened paperclip or similar
object. The button is recessed approximately 1 in. (2.5 cm) in the mir\
ror.
pg. 71 Instruments and controls
Rearview mirror/power folding sideview mirrors
Magnetic zones
file:///K|/ownersdocs/2007/2007_XC90/07xc90_02.htm (34 of 40)12/30/200\
6 5:53:37 PM

2007 Volvo XC90
The earth is divided into 15 magnetic zones. The compass is initially se\
t for the zone to which the car
was delivered, and should always be adjusted if the car is driven to a n\
ew magnetic zone. To do so:
- Switch the ignition to position II.
- Press the button on the rear side of the mirror with straightened pape\
rclip or similar object for
approximately 3 seconds until ZONE is displayed. The number of the curre\
nt magnetic zone will also be
displayed.
- Press the button repeatedly until the number for the desired zone (1-\
15) is displayed.
After several seconds, the compass heading will again be displayed, and \
the change of magnetic zones is
complete.
Calibrating the compass
- Stop the car in a large, open area, away from traffic.
- Turn off as many electrical devices in the car as possible to avoid in\
terference with the compass (e.g.
audio system, etc).
- Using a pen or similar object, hold the button (1) depressed for at \
least 6 seconds. "CAL" will be
displayed.
- Drive slowly in a circle at a maximum speed of 5 m.p.h. (8 km/h) unt\
il CAL is no longer displayed.
NOTE: This step can also be done by driving normally until CAL is no longer d\
isplayed. Calibration is
complete.
pg. 72 Instruments and controls
Rearview mirror/power folding sideview mirrors
file:///K|/ownersdocs/2007/2007_XC90/07xc90_02.htm (35 of 40)12/30/200\
6 5:53:37 PM

2007 Volvo XC90
pg. 80 Climate control
Electronic climate control (ECC)
AUTO
This function automatically regulates the Electronic Climate Control sys\
tem so that the selected
temperatures are maintained. The blower, heating, air distribution (air\
flow), air conditioning, and
optional air quality sensor are controlled. If you prefer to manually set any of these functions, the remaining
functions will still be controlled automatically. Pressing the AUTO butt\
on overrides any settings that were
previously made manually.

Rear window and sideview mirror defrosters
This function defrosts/ de-ices the rear window and sideview mirrors.
The LED in the switch will light up to indicate that the heating functio\
n is engaged. See
page 61 for additional
information on this function.
Never use ice scrapers made of metal as they can easily scratch the mirr\
or surface.

Temperature
These controls are used to individually set the temperature for both sid\
es of the passenger compartment.
Please note that the compartment will not be heated or cooled faster by \
setting the temperature higher or lower
than necessary.
Set the control to the temperature you prefer.
file:///K|/ownersdocs/2007/2007_XC90/07xc90_03.htm (5 of 8)12/30/2006 \
5:53:38 PM