SUSPENSION – REAR COIL SPRINGSP–45
SP
(b) Install the coil spring rear LH to the rear axle beam
assembly.
HINT:
Fit the lower end of the coil spring into the gap of the
spring lower seat.
(c) Apply a shop rug to the rear axle beam assembly.
3. CONNECT SHOCK ABSORBER ASSEMBLY REAR
LH
(a) While raising the jack, connect the shock absorber
assembly rear LH to the rear axle beam assembly.
(b) Temporarily tighten the nut.
4. CONNECT SHOCK ABSORBER ASSEMBLY REAR
RH
HINT:
Connect the RH side by the same procedures as the LH
side.
5. CONNECT REAR BRAKE TUBE NO.2
(a) Install the flexible hose and clip.
(b) Using SST, connect the brake tube to the flexible
hose.
Torque: 15 N*m (153 kgf*cm, 11 ft.*lbf)
SST 09023-00101
G025781E01
C088693
C088671
G025780
G025779E01
