2007 Ram 2500 (Diesel) Owner's Manual

Page 49 of 552

Ram 2500 (Diesel) 2007  Owners Manual •Children that are not big enough to properly wear the
vehicle seat belt (see section on Child Restraints)
should be secured in the rear seat in child restraints or
belt-positioning booster seats. O

Page 50 of 552

Ram 2500 (Diesel) 2007  Owners Manual Airbag System Components
The airbag system consists of the following:
•Airbag Control Module
•AIRBAG Readiness Light
•Driver Airbag
•Passenger Airbag
•Steering Wheel and Column
•Instrument

Page 51 of 552

Ram 2500 (Diesel) 2007  Owners Manual How The Airbag System Works
•
The airbag control module determines if a frontal
collision is severe enough to require the airbags to
inflate.
•The airbag control module will not detect roll over,

Page 52 of 552

Ram 2500 (Diesel) 2007  Owners Manual •When the airbag control module detects a collision
requiring the airbags, it signals the inflator units. A
large quantity of nontoxic gas is generated to inflate
the airbags. The airbag covers sepa

Page 53 of 552

Ram 2500 (Diesel) 2007  Owners Manual The passenger front airbag is to be turned off only if the
passenger:
•is an infant (less than 1 year old) who must ride in the
front seat because there is no rear seat, because the rear
seat is too

Page 54 of 552

Ram 2500 (Diesel) 2007  Owners Manual To Turn On the Passenger Airbag (Standard Cab Ve-
hicles Only)
Place the ignition key in the Passenger Airbag On/Off
Switch, push the key in and turn counterclockwise, and
remove the key from the swit

Page 55 of 552

Ram 2500 (Diesel) 2007  Owners Manual •As the airbags deflate you may see some smoke-like
particles. The particles are a normal by-product of the
process that generates the nontoxic gas used for airbag
inflation. These airborne particle

Page 56 of 552

Ram 2500 (Diesel) 2007  Owners Manual bags to inflate, it signals the inflators on the crash side of
the vehicle. A quantity of nontoxic gas is generated to
inflate the window bag. The inflating window bag
pushes the side pillar molding o