2007 NISSAN TIIDA steering system

EC-15
C
D
E
F
G
H
I
J
K
L
M
ECA
N
O
P Diagnosis Procedure ...........................................
1124
Component Inspection ........................................1125
P0101 MAF SENSOR .....................................1127
Description ..........................................................1127
DTC Logic ...........................................................1127
Diagnosis Procedure ...........................................1127
Component Inspection ........................................1129
P0110 IAT SENSOR .......................................1130
Description ..........................................................1130
DTC Logic ...........................................................1130
Diagnosis Procedure ...........................................1130
Component Inspection ........................................1131
P0115 ECT SENSOR .....................................1132
Description ..........................................................1132
DTC Logic ...........................................................1132
Diagnosis Procedure ...........................................1132
Component Inspection ........................................1133
P0120 ELECTRIC THROTTLE CONTROL
ACTUATOR ....................................................
1134
Description ..........................................................1134
DTC Logic ...........................................................1134
Diagnosis Procedure ...........................................1134
P0180 FPT SENSOR ......................................1136
Description ..........................................................1136
DTC Logic ...........................................................1136
Diagnosis Procedure ...........................................1136
Component Inspection ........................................1137
P0190 FRP SENSOR .....................................1138
Description ..........................................................1138
DTC Logic ...........................................................1138
Diagnosis Procedure ...........................................1138
Component Inspection ........................................1139
P0200 FUEL INJECTOR ................................1140
DTC Logic ...........................................................1140
Diagnosis Procedure ...........................................1140
Component Inspection ........................................1141
P0201, P0202, P0203, P0204 FUEL INJEC-
TOR ................................................................
1142
DTC Logic ...........................................................1142
Diagnosis Procedure ...........................................1142
Component Inspection ........................................1143
P0225 APP SENSOR .....................................1144
Description ..........................................................1144
DTC Logic ...........................................................1144
Diagnosis Procedure ...........................................1144
Component Inspection ........................................1146
P0235 TC BOOST SENSOR ..........................1147
Description ..........................................................1147
DTC Logic ...........................................................1147
Diagnosis Procedure ...........................................1147
Component Inspection ........................................1148
P0335 CKP SENSOR .....................................1149
DTC Logic ............................................................1149
Diagnosis Procedure ...........................................1149
Component Inspection .........................................1150
P0340 CMP SENSOR ....................................1151
DTC Logic ............................................................1151
Diagnosis Procedure ...........................................1151
Component Inspection .........................................1152
P0380 GLOW RELAY ....................................1154
DTC Logic ............................................................1154
Diagnosis Procedure ...........................................1154
P0381 GLOW CONTROL SYSTEM ...............1156
DTC Logic ............................................................1156
Diagnosis Procedure ...........................................1156
Component Inspection .........................................1157
P0409 EGR VOLUME CONTROL VALVE
CONTROL POSITION SENSOR ....................
1158
DTC Logic ............................................................1158
Diagnosis Procedure ...........................................1158
P0487 EGR VOLUME CONTROL VALVE ....1160
DTC Logic ............................................................1160
Diagnosis Procedure ...........................................1160
Component Inspection .........................................1161
P0488 EGR SYSTEM .....................................1162
DTC Logic ............................................................1162
Diagnosis Procedure ...........................................1162
Component Inspection .........................................1164
P0500 VSS .....................................................1165
Description ...........................................................1165
DTC Logic ............................................................1165
Diagnosis Procedure ...........................................1165
P0530 REFRIGERANT PRESSURE SENSOR
1166
Description ...........................................................1166
DTC Logic ............................................................1166
Diagnosis Procedure ...........................................1166
P0560 BATTERY VOLTAGE .........................1168
DTC Logic ............................................................1168
Diagnosis Procedure ...........................................1168
P0571 ASCD BRAKE SWITCH .....................1171
DTC Logic ............................................................1171
Diagnosis Procedure ...........................................1171
Component Inspection .........................................1172
P0575 ASCD STEERING SWITCH ................1174
Description ...........................................................1174
DTC Logic ............................................................1174
Diagnosis Procedure ...........................................1174
Component Inspection (ASCD Switch) ................1176
Component Inspection (ASCD Steering Switch) .1176

INSPECTION AND ADJUSTMENT
EC-27
< BASIC INSPECTION >[HR16DE (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
MA
EC
N
P O
quirementINFOID:0000000001161131
1.START
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON and wait at least 2 seconds.
5. Turn ignition switch OFF and wait at least 10 seconds.
>> END
THROTTLE VALVE CLOSED POSITION LEARNING
THROTTLE VALVE CLOSED POSITION LEARNING : DescriptionINFOID:0000000001161132
Throttle Valve Closed Position Learning is a function of ECM to learn the fully closed position of the throttle
valve by monitoring the throttle position sensor output signal. It must be performed each time harness connec-
tor of electric throttle control actuator or ECM is disconnected.
THROTTLE VALVE CLOSED POSITION LEARNING : Special Repair Requirement
INFOID:0000000001161133
1.START
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
Make sure that throttle valve moves during above 10 seconds by confirming the operating sound.
>> END
IDLE AIR VOLUME LEARNING
IDLE AIR VOLUME LEARNING : DescriptionINFOID:0000000001161134
Idle Air Volume Learning is a function of ECM to learn the idle air volume that keeps each engine idle speed
within the specific range. It must be performed under any of the following conditions:
 Each time electric throttle control actuator or ECM is replaced.
 Idle speed or ignition timing is out of specification.
IDLE AIR VOLUME LEARNING : Special Repair RequirementINFOID:0000000001161135
1.PRECONDITIONING
Make sure that all of the following conditions are satisfied.
Learning will be cancelled if any of the following conditions are missed for even a moment.
 Battery voltage: More than 12.9V (At idle)
 Engine coolant temperature: 70 - 100°C (158 - 212°F)
 Park/neutral position switch: ON
 Electric load switch: OFF
(Air conditioner, headlamp, rear window defogger)
On vehicles equipped with daytime light systems, set lighting switch to the 1st position to light only
small lamps.
 Steering wheel: Neutral (Straight-ahead position)
 Vehicle speed: Stopped
 Transmission: Warmed-up
- For A/T models with CONSULT-III
 Drive vehicle until “ATF TEMP SE 1” in “DATA MONITOR” mode of “A/T” system indicates less than 0.9V.
- For A/T models without CONSULT-III and M/T models.
 Drive vehicle for 10 minutes
Do you have CONSULT-III?
YES >> GO TO 2.

EC-36
< FUNCTION DIAGNOSIS >[HR16DE (WITH EURO-OBD)]
ENGINE CONTROL SYSTEM
Component Description
INFOID:0000000001161141
1. ASCD steering switch 2. MAIN switch 3. CANCEL switch
4. SET/COAST switch 5. RESUME/ACCELERATE switch 6. ASCD brake switch
7. Stop lamp switch 8. ASCD clutch switch 9. Clutch pedal
ALBIA0273ZZ
Component Reference
Accelerator pedal position sensorEC-286, "
Description"
ASCD brake switchEC-270, "Description"
ASCD steering switchEC-267, "Description"
ASCD vehicle speed sensorEC-278, "Description"
Camshaft position sensor (PHASE)EC-201, "Description"
Crankshaft position sensor (POS)EC-197, "Description"
Cooling fan motorEC-307, "Description"
Electric throttle control actuatorEC-222, "Description"
Engine coolant temperature sensorEC-142, "Description"
Fuel injectorEC-313, "Description"
Fuel pumpEC-316, "Description"
Heated oxygen sensor 1EC-148, "Description"
Heated oxygen sensor 1 heaterEC-163, "Description"
Heated oxygen sensor 2EC-166, "Description"
Heated oxygen sensor 2 heaterEC-176, "Description"
Ignition signalEC-319, "Description"
Intake air temperature sensorEC-139, "Description"
Intake valve timing control solenoid valveEC-219, "Description"

EC-38
< FUNCTION DIAGNOSIS >[HR16DE (WITH EURO-OBD)]
MULTIPORT FUEL INJECTION SYSTEM
MULTIPORT FUEL INJECTION SYSTEM
System DiagramINFOID:0000000001161142
System DescriptionINFOID:0000000001161143
INPUT/OUTPUT SIGNAL CHART
*1: This sensor is not used to control the engine system under normal conditions.
*2: This signal is sent to the ECM through CAN communication line.
*3: ECM determines the start signal status by the signals of engine speed and battery voltage.
JMBIA0408GB
Sensor Input Signal to ECM ECM function Actuator
Crankshaft position sensor (POS)
Engine speed*
3
Piston position
Fuel injection
& mixture ratio
controlFuel injector Camshaft position sensor (PHASE)
Mass air flow sensor Amount of intake air
Intake air temperature sensor Intake air temperature
Engine coolant temperature sensor Engine coolant temperature
Heated oxygen sensor 1 Density of oxygen in exhaust gas
Throttle position sensor Throttle position
Accelerator pedal position sensor Accelerator pedal position
Park/neutral position (PNP) switch Gear position
Battery
Battery voltage*
3
Knock sensor Engine knocking condition
EPS control unit Power steering operation
Heated oxygen sensor 2*
1Density of oxygen in exhaust gas
BCM
Air conditioner operation*
2
Combination meter
Vehicle speed*2

EC-46
< FUNCTION DIAGNOSIS >[HR16DE (WITH EURO-OBD)]
MULTIPORT FUEL INJECTION SYSTEM
Component Description
INFOID:0000000001161145
1. ASCD steering switch 2. MAIN switch 3. CANCEL switch
4. SET/COAST switch 5. RESUME/ACCELERATE switch 6. ASCD brake switch
7. Stop lamp switch 8. ASCD clutch switch 9. Clutch pedal
ALBIA0273ZZ
Component Reference
Accelerator pedal position sensorEC-286, "
Description"
Camshaft position sensor (PHASE)EC-201, "Description"
Crankshaft position sensor (POS)EC-197, "Description"
Engine coolant temperature sensorEC-142, "Description"
Fuel injectorEC-313, "Description"
Heated oxygen sensor 1EC-148, "Description"
Heated oxygen sensor 2EC-166, "Description"
Intake air temperature sensorEC-139, "Description"
Knock sensorEC-195, "Description"
Mass air flow sensorEC-134, "Description"
Park/neutral position (PNP) switchEC-280, "Description"
Throttle position sensorEC-261, "Description"
Vehicle speed sensorEC-213, "Description"

ELECTRIC IGNITION SYSTEM
EC-53
< FUNCTION DIAGNOSIS >[HR16DE (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
MA
EC
N
P O
Component DescriptionINFOID:0000000001161149
1. ASCD steering switch 2. MAIN switch 3. CANCEL switch
4. SET/COAST switch 5. RESUME/ACCELERATE switch 6. ASCD brake switch
7. Stop lamp switch 8. ASCD clutch switch 9. Clutch pedal
ALBIA0273ZZ
Component Reference
Accelerator pedal position sensorEC-286, "
Description"
Camshaft position sensor (PHASE)EC-201, "Description"
Crankshaft position sensor (POS)EC-197, "Description"
Engine coolant temperature sensorEC-142, "Description"
Ignition signalEC-319, "Description"
Knock sensorEC-195, "Description"
Mass air flow sensorEC-134, "Description"
Park/neutral position (PNP) switchEC-280, "Description"
Throttle position sensorEC-145, "Description"
Vehicle speed sensorEC-213, "Description"

EC-54
< FUNCTION DIAGNOSIS >[HR16DE (WITH EURO-OBD)]
AIR CONDITIONING CUT CONTROL
AIR CONDITIONING CUT CONTROL
System DiagramINFOID:0000000001161150
System DescriptionINFOID:0000000001161151
INPUT/OUTPUT SIGNAL CHART
*1: This signal is sent to the ECM through CAN communication line.
*2: ECM determines the start signal status by the signals of engine speed and battery voltage.
SYSTEM DESCRIPTION
This system improves engine operation when the air conditioner is used.
Under the following conditions, the air conditioner is turned off.
 When the accelerator pedal is fully depressed.
 When cranking the engine.
 At high engine speeds.
 When the engine coolant temperature becomes excessively high.
 When operating power steering during low engine speed or low vehicle speed.
 When engine speed is excessively low.
JMBIA0175GB
Sensor Input Signal to ECM ECM function Actuator
BCM*
1Air conditioner ON signal
Air conditioner
cut controlIPDM E/R
↓
Air conditioner relay
↓
Compressor Accelerator pedal position sensor Accelerator pedal position
Crankshaft position sensor (POS)
Camshaft position sensor (PHASE)Engine speed*
2
Engine coolant temperature sensor Engine coolant temperature
Battery
Battery voltage*
2
Refrigerant pressure sensor Refrigerant pressure
EPS control unit*
1Power steering operation
Combination meter*
1Vehicle speed

AUTOMATIC SPEED CONTROL DEVICE (ASCD)
EC-61
< FUNCTION DIAGNOSIS >[HR16DE (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
MA
EC
N
P O
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
System DiagramINFOID:0000000001161154
System DescriptionINFOID:0000000001161155
INPUT/OUTPUT SIGNAL CHART
*: This signal is sent to the ECM through CAN communication line
BASIC ASCD SYSTEM
Refer to Owner's Manual for ASCD operating instructions.
Automatic Speed Control Device (ASCD) allows a driver to keep vehicle at predetermined constant speed
without depressing accelerator pedal. Driver can set vehicle speed in advance between approximately 40 km/
h (25 MPH) and 153 km/h (95 MPH).
ECM controls throttle angle of electric throttle control actuator to regulate engine speed.
Operation status of ASCD is indicated by CRUISE lamp and SET lamp in combination meter. If any malfunc-
tion occurs in ASCD system, it automatically deactivates control.
NOTE:
Always drive vehicle in safe manner according to traffic conditions and obey all traffic laws.
SET OPERATION
Press MAIN switch. (The CRUISE lamp in combination meter illuminates.)
When vehicle speed reaches a desired speed between approximately 40 km/h (25 MPH) and 153 km/h (95
MPH), press SET/COAST switch. (Then SET lamp in combination meter illuminates.)
ACCELERATE OPERATION
If the RESUME/ACCELERATE switch is pressed during cruise control driving, increase the vehicle speed until
the switch is released or vehicle speed reaches maximum speed controlled by the system.
And then ASCD will keep the new set speed.
CANCEL OPERATION
JMBIA0823GB
Sensor Input signal to ECM ECM function Actuator
ASCD brake switch
Brake pedal operation
ASCD vehicle speed controlElectric throttle control
actuator Stop lamp switch
ASCD clutch switch (M/T models) Clutch pedal operation
ASCD steering switch ASCD steering switch operation
Park/neutral position switch Gear position
Combination meter Vehicle speed*
TCM (A/T models) Powertrain revolution*