2007 NISSAN TIIDA reset

VTL-22
< ON-VEHICLE REPAIR >[AUTOMATIC AIR CONDITIONER]
MODE DOOR MOTOR
MODE DOOR MOTOR
Removal and InstallationINFOID:0000000001696290
REMOVAL
1. Remove the glove box assembly and instrument lower cover (RH) for LHD only. Refer to IP-11, "Removal
and Installation".
2. Remove the instrument lower finisher and instrument lower cover (LH) for RHD only. Refer to IP-11,
"Removal and Installation".
3. Remove the mode door motor screws (A), and then pull out the
mode door motor (1).
4. Disconnect mode door motor connector and remove the mode
door motor (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing door motor, perform door motor starting position reset by following self-diagnosis
STEP-3. Refer to HAC-213, "
Front Air Control Self-Diagnosis".
SJIA0694E