DI-42
TRIPLE METERS
Revision: 2006 November2007 350Z
Trip Computer Switch InspectionNKS0006U
Symptom:
Shift-up indicator setting indication is not displayed properly or shift-up indicator does not operate prop-
erly.
Trip computer switch does not operate.
1. CHECK CONNECTOR
1. Turn ignition switch OFF.
2. Remove combination meter. Refer to DI-24, "
Removal and Installation for Combination Meter" .
3. Remove rear finisher to combination meter. Refer to DI-24, "
Disassembly and Assembly for Combination
Meter" .
4. Check trip computer switch connector for looseness.
OK or NG
OK >> GO TO 2.
NG >> Repair trip computer switch connector.
2. CHECK CIRCUIT
1. Disconnect trip computer switch connector.
2. Check continuity between trip computer switch harness connec-
tor M208 terminals 3, 4 and 5.
OK or NG
OK >> Replace combination meter.
NG >> Replace trip computer switch.
Removal and Installation of Triple MetersNKS0006V
REMOVAL
1. Remove cluster lid C. Refer to IP-10, "INSTRUMENT PANEL
ASSEMBLY" .
2. Remove screws (2), and remove triple meters.
INSTALLATION
Installation is the reverse order of removal.
Terminal Condition Continuity
3
5Setting switch is pressed. Yes
Setting switch is released. No
4Mode switch is pressed. Yes
Mode switch is released. No
SKIA3271E
PKIA1762E
