COMBINATION METERS
DI-23
C
D
E
F
G
H
I
J
L
MA
B
DI
Revision: 2006 November2007 350Z
Electrical Components InspectionNKS0006C
FUEL LEVEL SENSOR UNIT
For removal, refer to FL-4, "FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY" .
Fuel Level Sensor Unit and Fuel Pump (Main)
Check the resistance between terminals 2 and 5.
*1 and *2: When float rod is in contact with stopper.
If the results of check are NG, check the fuel level sensor unit
and fuel pump (main) harness. Refer to DI-23, "
Fuel Level Sen-
sor Unit and Pump (Main) Harness" .
Fuel Level Sensor Unit and Pump (Main) Harness
Check the continuity between the following terminals.
If the results of check are NG, replace fuel pump assembly. If the
results of check are OK, replace fuel level sensor unit.
Fuel Level Sensor Unit (Sub)
Check the resistance between terminals 1 and 2.
*1 and *2: When float rod is in contact with stopper.Terminal Float position [mm (in)] Resistance value [Ω]
25*1 Empty 30 (1.18) Approx. 80
*2 Full 210 (8.27) Approx. 3
SKIB1307E
Terminal Continuity
2 - Signal terminal
Ye s
5 - Ground terminal
SKIA3582E
Terminal Float position [mm (in)] Resistance value [Ω]
12*1 Full 8 (0.31) Approx. 3
*2 Empty 175 (6.89) Approx. 43
SKIB1308E
