2007 MITSUBISHI LANCER EVOLUTION diagram

HOW TO READ THE WIRING DIAGRAMS -Markings for Connector EarthingA-6
MARKINGS FOR CONNECTOR EARTHING
6
5
3
4
3
8
2
7
1

HOW TO READ THE WIRING DIAGRAMS -Markings for Connector EarthingA-7
ItemNo.Connector/EarthingSymbolContents
Connector
and terminal
marking1Male connectorMale terminalThe male and female terminals are
indicated as shown. The connector
with male terminal(s) is called as
male connector and indicated by
double connector contour linens,
while the connector with female
Male
terminalMale connector
whiletheconnectorwithfemale
terminal(s) is called as female
connector and indicated by single
connector contour line.
-
Female
connec-
tor
Female terminal
Female
terminal
Female connector
Connector
symbol
marking2DeviceThe symbol indicates the vehicle
connector as viewed from the
illustrated direction. At the connec-
tion with a device, the connector
symbol on the device side is
shown, and for an intermediate
connector, a male connector sym-
bolisshownForspareconnectors
Intermediate connector
bolisshown.For spare connectors
and check connectors, no device is
connected, and so the harness-
side connector symbol is shown for
these connectors. The details for
the diagnosis connector differ from
the above description. For details,
refer to the “MUT-II operation
instructions”.
Spare connector, check connector
instructions.

HOW TO READ THE WIRING DIAGRAMS -Markings for Connector EarthingA-8
ItemNo.Connector/EarthingSymbolContents
Connector
connection
marking3Direct connection typeA connection between a device
and connector on the harness side
is either by direct insertion in the
device (direct connection type) or
by connection with a harness
connector on the device side
furnished (harness connection
type)Thetwotypesareindicated
4Harness connection type
type).Thetwotypes areindicated
as illustrated.
5Intermediate connector
Earth
markings6Body earthEarth is either by body earth,
device earth or control unit interior
earth. These are indicated as
illustrated.
7Device earth
8Earth in control unit

HOW TO READ THE WIRING DIAGRAMS -Wire Colour CodesA-9
WIRE COLOUR CODES
Wire colours are identified by the follow colour codes.
CodeWire colourCodeWire colour
BBlackPPink
BRBrownRRed
GGreenSBSky blue
GRGraySISilver
LBlueVViolet
LGLight greenWWhite
OOrangeYYellow
If a cable has two colours, the first of the two colour code
characters indicates the basic colour (colour of the cable
coating) and the second indicates the marking colour.
No.Meaning
1:Flexible wire
:Twisted wire
2Wire size(mm2)*
3Basic colour (colour of the cable coating)
4Marking colour
NOTE
*: No code indicates 0.5 mm2.
Cable colour code in parentheses indicates 0.3 mm2.
1234
Example: 1.25 G - B

HOW TO READ THE WIRING DIAGRAMS -Abbreviation SymbolsA-10
ABBREVIATION SYMBOLS
The abbreviation symbols used in wiring diagrams are defined below.
1. Abbreviation symbols used for system name
Abbreviation
symbolsMeaningAbbreviation
symbolsMeaning
A/CAir conditionerEGRExhaust gas recirculation
ABSAnti-skid braking systemETACSElectronic time alarm control system
ACDActive center differentialSRSSupplemental restraint system
AY CActive yaw control
2. Abbreviation symbols used for combination meters
Abbreviation
symbolsMeaningAbbreviation
symbolsMeaning
ABSAnti-skid braking system warning lampSNOWActive center differential mode indicator
lamp
BEAMHigh beam indicator lampSPEEDSpeedmeter
BRAKEBrake warning lampSRSSupplemental restraint system warning
lamp
CHECK
ENGINECheck engine warning lampTARMACActive center differential mode indicator
lamp
CHGCharging warning lampT/GAEngine coolant temperature gauge
DOORDoor-ajar warning lampTACHOTachometer
F/GAFuel gaugeTAILTail, position and licence plate indicator
lamp
FRONT FOGFront fog indicator lamp
lamp
FUELLow fuel warning lampTRIPTripmeter
GRAVELActive center differential mode indicator
lampTURN (LH)Turn signal indicator lamp (LH)
ODOOdometerTURN (RH)Trun signal indicator lamp (RH)
OILOil pressure warning lampWATER
SPRAY
Intercooler water spray indicator lamp
REAR FOGRear fog indicator lamp
SPRAY
3. Abbreviation symbols used for switched and relay
Name of switches and
relaysAbbreviation
symbolsOperation
Blower switchLOBlower operates at low speed
MLBlower operates at medium low speed
MHBlower operates at medium high speed
HIBlower operates at high speed

HOW TO READ THE WIRING DIAGRAMS -Abbreviation SymbolsHOW TO READ THE WIRING DIAGRAMS -Abbreviation SymbolsA-11
Name of switches and
relaysOperation Abbreviation
symbols
Dimmer passing
switch
LOLow beams ON
switch
HIHigh beams ON
PASS
Door lock actuatorLOCKDoor lock
UNLOCKDoor unlock
Headlamp leveling
switch
1Low beam light axis drops by one step
switch
2Low beam light axis drops by two step
3Low beam light axis drops by three step
4Low beam light axis drops by four step
Ignition switchACCWhen turned to the ACC (ACCESSORY) or ON position, the power
circuit will start
IG1Even when at the ST (START) position, the power circuit will start
IG2When at the ST (START) position, the power circuit will not start
functioning
Intercooler water spray
switch
MANUALWater is sprayed while the switch is being pressed
switch
AUTOWater is sprayed automatically according to driving conditions
Lighting switchTAILPosition, tail, licence plate and illumination lamps ON
HEADHeadlamps ON
OthersOFFSwitched OFF
ONSwitched ON
Power window switchUPWindow closes
DOWNWindow opens
AUTO UPWindow is easily closed with one action
AUTO DOWNWindow is easily opened with one action
LOCKPrevents all switches other than the main switch from operating the
power windows
Remote controlled
mirrorswitch
LHL.H. mirror operates
mirror switch
RHR.H. mirror operates
Room lamp switchDOORRoom lamp ON when a door is open
Turn signal switchLHL.H. signal lamps ON
RHR.H. signal lamps ON

HOW TO READ THE WIRING DIAGRAMS -Abbreviation SymbolsA-12
Name of switches and
relaysOperation Abbreviation
symbols
Windshield wiper
switch
MISTWiper operates once
switch
INTWiper operates intermittently
LOWiper operates at low speed
HIWiper operates at high speed
4. Other abbreviation symbols
Abbreviation
symbolsMeaningAbbreviation
symbolsMeaning
ECUElectronic control unitLCDLiquid crystal display
GNDEarthLHLeft hand
ILLIllumination lampLHDL.H. drive vehicles
INDIndicator lampRHRight hand
J/BJunction blockRHDR.H. drive vehicles
J/CJoint connector

B-1
ELECTRICAL
WIRING
CONTENTS
WIRING HARNESS CONFIGURATION
DIAGRAMS 4.........................
OVERALL WIRING DIAGRAM
L.H. drive vehicles 4........................
R.H. drive vehicles 5........................
ENGINE COMPARTMENT
L.H. drive vehicles 6........................
R.H. drive vehicles 8........................
ENGINE AND TRANSMISSION
L.H. drive vehicles 10.......................
R.H. drive vehicles 14.......................
DASH PANEL
L.H. drive vehicles 18.......................
R.H. drive vehicles 24.......................
FLOOR AND ROOF
L.H. drive vehicles 30.......................
R.H. drive vehicles 32.......................
DOOR
L.H. drive vehicles 34.......................
R.H. drive vehicles 36.......................
LUGGAGE COMPARTMENT
L.H. drive vehicles 38.......................
R.H. drive vehicles 39.......................
SINGLE PART INSTALLATION
POSITION 40.........................
RELAY 40.................................
ECU 41...................................
SENSOR 43...............................
SOLENOID VALVE 46......................
INSPECTION CONNECTOR AND SPARE
CONNECTOR 47...........................
FUSIBLE LINK AND FUSE 48..............
EARTH CABLE 49.........................
EARTH 50.................................
CIRCUIT DIAGRAMS 54...............
J/B 54....................................
J/C
L.H. drive vehicles 56.......................
R.H. drive vehicles 62.......................
CENTRALIZED JUNCTION 68..............
POWER DISTRIBUTION SYSTEM 74........
STARTING SYSTEM 79....................