Page 4 of 72
•Editing/Adding entries in the Address Book and Avoid Areas List 
•  DVD ROM Load and Eject 
When the vehicle begins to move, and the Select Route Screen is shown, 
the highlighted route is automatically selected and guidance begins.
When the vehicle speed is reduced to 5 MPH or less, system restrictions
are lifted and you have full access to the system. 
QUICK START 
TO PLAY A RADIO STATION 
1. Ensure that the navigation system is on. 
2. Press MEDIA. 
3. Select AM, FM1 or FM2. 
4. Press TUNE to adjust manually 
up (
) or down () the
frequency band. 
5. Press SEEK to find the next 
strong station up (
) or down 
(
) the frequency band. 
TO PLAY SATELLITE RADIO 
(SR - IF EQUIPPED) 
1. Ensure that the navigation system is on. 
2. Press MEDIA.
2007  (nv2) 
Supplement
USA  (fus)
Introduction
4 
         
        
        
     
        
        Page 9 of 72

Refer to the System Overview 
graphics on the previous page. 
1. Memory presets: To save a 
station (AM/FM1/FM2) in radio mode, tune to the selection. Press and
hold the desired memory preset button (1–6). Press the memory preset
buttons (1-6) to access your preset stations. In CD mode, press the
memory preset buttons (1-6) to play the disc in the corresponding slot
location. 
2.  CD slot: To load a CD: Press LOAD and a specific memory preset to 
load a CD to a specific slot. Once LOAD CD# appears in the display, the
CD door will open. Insert the CD label side up. 
3.
(Eject):  Press the eject 
button to eject a single disc. Press 
and hold the button to eject all discs
present in the system. To eject a specific disc, EJECT and then press the
corresponding memory preset button. If you do not select a specific disc,
the system will automatically eject the disc that is currently playing. 
4.  LOAD: Press the load button to 
load a single disc. Press and hold
the button to load discs in all empty
slot locations. 
5.  MAP: Press to access the 
navigation map. Press while the map
display is active to re-center the
map on the current vehicle position. Press the button while the map
display is active and a route is active to step through the different map
guidance views. 
6.  DEST (Destination): Press to 
access the navigation destination
entry menu. Press while in the
navigation destination entry menu to show additional destination entry
techniques. 
7.  NAV (Navigation): Press to 
access the navigation menu. Press
while in the navigation menu to step
through the navigation menu tabs.
2007  (nv2) 
Supplement
USA  (fus)
System overview
9 
         
        
        
     
        
        Page 18 of 72

DSP(Digital Signal Processing): 
Press to optimize the sound quality
for ALL SEATS, DRIVER and REAR
seats. If THX equipped, optimization
is available for ALL SEATS, DRIVER
and FRONT. 
SCV  (Speed Compensated Volume): 
Radio volume changes automatically
with vehicle speed to compensate
for road and wind noise. You may
turn the feature on/off, and select a
level of compensation between 1
and 7 by pressing the corresponding
button. 
DEFAULT SETTING:  Press to clear out any current settings and return 
the system to the default settings. 
Note:  Please refer to your Owner’s Guidefor further information. 
DVD (if equipped) 
Note:  The following information is intended for Freestyle, Five 
Hundred  andMontego vehicles equipped with an optional DVD player. 
If you have another vehicle, please refer to the next DVD section. 
Your vehicle may be equipped with a DVD player. The navigation system 
can provide you interaction with the DVD system in the rear of the
vehicle. To access the DVD screen: 
1. Ensure that the navigation system is ON.
2007  (nv2) 
Supplement
USA  (fus)
Audio features
18 
         
        
        
     
        
        Page 22 of 72

4. The screen will show you the 
selected playing media of the
different headsets (A and B). To
make adjustments, ensure that the
correct headset (A or B) is
highlighted. The appropriate
controls will appear to allow you to
make adjustments to your current 
playing media. 
• MEDIA: Press to select the desired media in the selected headset (A 
or B). 
•  FULL ENABLED: When active, rear seat passengers can select any 
audio/video source for the A headset (B headset can only choose from
DVD and DVD AUX). If the front seat passengers are listening to the
radio, the rear seat passengers can also select to listen to the radio
and will have control to change the radio station or Satellite Radio
channel. 
•  REAR ONLY: When active, rear seat passengers can select any 
audio/video source for the A headset (B headset can only choose from 
DVD and DVD AUX). If the front seat passengers are listening to the
radio, the rear seat passengers can also select to listen to the radio
but will not have control to change the radio station or Satellite Radio
channel. 
•  DISABLED: When active, all features for the rear seat passengers are 
disabled. REAR ZONE OFF will be displayed in front of the A and B
buttons. The audio selection of the front seat will play through all
speakers. At any time the rear seat passengers can turn on the Family
Entertainment System (FES), if equipped, through the DVD player. At
that point, the navigation system will automatically display REAR
ZONE ENTERTAINMENT and enable the headsets. The primary
selection for the front seat will change to DVD. 
•  HEADPHONES ON/OFF: Press to turn the headphones on/off. 
SATELLITE RADIO (IF EQUIPPED) 
Your vehicle may be equipped with Satellite Radio capability. Vehicles 
that are equipped with a factory installed SIRIUS Satellite Radio system
include a limited subscription term which begins on the date of sale/
lease of the vehicle. Extended subscription terms are available, please
contact SIRIUS at 1–888–539–7474.
2007  (nv2) 
Supplement
USA  (fus)
Audio features
22 
         
        
        
     
        
        Page 28 of 72

DISPLAY 
To access the display settings:
1. Ensure that the navigation system is ON. 
2. Press MENU. The Menu screen will display. 
3. Press DISPLAY. You may then select from the following options:
• AUTO DIM: Select to automatically dim the display brightness with 
the vehicle backlighting (when headlights are turned on). Otherwise,
display brightness can be manually adjusted. 
•  STATUS BAR: Press to display only the Status Bar until the screen is 
touched again. Refer to  Status Bar Description in Basic Operation. 
•  DISPLAY OFF: Press to turn off the entire screen. Press the screen 
or any hard button to turn the display on again. 
•  AUTO: Press to set the display to automatic mode. When headlights 
are turned on, the system will automatically switch to the night
display screen. To adjust brightness or contrast, press + or — . 
•  D AY: Press to select the day screen. To adjust brightness or contrast, 
press + or — . 
•  NIGHT: Press to select the night screen display. To adjust brightness 
or contrast, press + or — . 
•  DEFAULT SETTING: Press to clear any current settings and return 
to the system default.
2007  (nv2) 
Supplement
USA  (fus)
System features
28 
         
        
        
     
        
        Page 29 of 72
•SAMPLE MAP: Shows you how the map will appear with the current 
settings 
DATE/TIME 
To access the date/time settings:
1. Ensure that the navigation system is ON. 
2. Press MENU. The Menu screen will display. 
3. Press DATE / TIME. You may then select from the following options:
SHOW CLOCK / SHOW CALENDAR:  Press to toggle between CLOCK 
and CALENDAR screens. Under the CLOCK screen, the following 
buttons will be available: 
•  CLOCK ON/OFF : Press ON to enable the clock display in the status 
bar. Press OFF to disable the clock display in the status bar. 
•  TIME SET BUTTONS: Press + or – to adjust the hours and minutes. 
•  24 HOUR FORMAT: If enabled, the system will display military time. 
If disabled, the user must select AM or PM. 
•  DAYLIGHT SAVINGS TIME (if equipped): Automatically prompts 
you to adjust the clock according to the daylight savings calendar. 
•  SHOW CALENDAR: Press to display the calendar screen.
2007(nv2) 
Supplement
USA  (fus)
System features
29 
         
        
        
     
        
        Page 31 of 72

•NONE: Press to turn off all audible beeps. You may press any button 
and no beeps will be heard. 
LANGUAGE:  One must be selected at all times: 
•  ENGLISH: Press to set the system language to English. 
•  ESPANOL: Press to set the system language to North American 
Spanish. 
•  FRANCAIS: Press to set the system language to North American 
French. 
Note:  The system will automatically restart after a new language is 
chosen. 
VOICE VOLUME:  Press +/- to select voice prompt volume level (1–34). 
You may also turn the volume control during a voice prompt to adjust
the volume level. 
TEST:  Press to hear an audio sample of voice prompt at the currently 
selected volume. 
NAVIGATION GUIDANCE:  Press ON to hear navigation guidance voice 
prompts. Press OFF to turn the voice prompts off. 
DEFAULT SETTING:  Press to clear any current settings and return to 
the system default settings. 
SECURITY 
Your navigation system has a special security feature which allows you to 
enable the valet mode. In valet mode, if your vehicle is being parked by a
valet, they will be unable to access any of the navigational information
(addresses, destinations, etc.), change any settings or eject any CDs or
the navigation DVD. To access and enable valet mode: 
1. Ensure that the navigation system is on.
2007  (nv2) 
Supplement
USA  (fus)
System features
31 
         
        
        
     
        
        Page 35 of 72
2. Press MENU. 
3. Press SYSTEM INFO.
4. Press ACCESS NAVIGATION 
DVD. The following disclaimer will
appear: 
“To access the navigation DVD, 
select the OPEN button. This will
cause the display to open. If the
navigation DVD is installed, it will
be ejected automatically. The screen
will close automatically when a disc
is inserted, or if no activity is
detected for 5 minutes.”
2007 (nv2) 
Supplement
USA  (fus)
System features
35