2007 Lancia Musa lock

16
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
Replacing the battery of the key with remote control
If when pressing the remote control buttons the led F on the key
flashes briefly only once, the battery should be replaced with an
equivalent one that can be purchased at common stores.
Battery replacement:
❒press button A and move the metal insert B to open position;
❒use a finely-tipped screwdriver to turn the screw C;
❒pull out the battery holder D and replace the battery E making
sure that the bias is correct;
❒re-insert the battery holder D in the key and lock it turning the
screw C.
Request for additional remote controls
The system can recognise up to 8 keys with incorporated remote
control. Should a new key with remote control be necessary, contact a
Lancia Dealership, taking with you the CODE card, a personal
identity document and the car’s ownership documents.
Used batteries are harmful to the environment. They should be disposed of as specified by law in
the special containers provided, or take them to a Lancia Dealership, which will deal with their
disposal.
L0D0018m

17
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
KEY WITHOUT REMOTE CONTROL (SPARE KEY)
According to versions the car can be delivered with retractable key 1
or fixed key 2.
The metal insert A of key 1 retracts into the key grip.
Button B opens the metal insert A.
Keys operate the following:
– keep button B pressed
– move the metal insert A
– release button B and then turn the metal insert A until hearing the
click as it locks into place.
L0D0014m
L0D0340m
WARNINGButton B should only be pressed when the key is away from the body, in
particular from the eyes and from objects that can be spoilt (e.g. clothes).
Make sure the key can never be touched by others, especially children, who may
inadvertently press the button.

18
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
Keys operates:
❒the ignition switch;
❒the driver’s door;
❒the fuel filler cap locking/unlocking (versions with fuel filler cap
with keylock)
❒passenger side airbag deactivation switch (where provided);
❒cut-in of door lock device C when the electric system is failing
(e.g. run-down battery;
❒cut-in of child lock safety device D on rear doors.
L0D0322m

19
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
The main functions that can be activated with the keys (with or without remote control) are the following:
Type of key
Spare key
without
remote control
Main keywith remote
control
Direction indicators flashing
(only with key with
remote control)
Deterrence led
Pressing the pushbutton Ëenables fuel lid to be openedDoor opening
Key turning
counterclockwise
(driver’s side)
Key turning
counterclockwise
(driver’s side)
Pressing briefly
button
Ë
Two flashings
Turning off Door locking
from the outside
Key turning
clockwise
(driver’s side)
Key turning
clockwise
(driver’s side)
Pressing briefly
button
Á
One flashing
Turned on fixed for approx.
3 seconds, followed
by deterrence led flashingBoot opening
Prolonged pressing
(> 2 seconds) on button
R
Two flashings
Deterrence led flashing

20
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
IGNITION SWITCH
The key can be turned to 3 different positions:
❒STOP: engine off, key can be removed, steering column locked.
Certain electrical devices (e.g.: sound system, power windows…)
can work.
❒MAR: driving position. All electrical devices are powered.
❒AVV: engine starting (unstable position).
The ignition switch is fitted with a safety mechanism that, in the
event the engine is not started, turns back the ignition key to STOP
before repeating the starting operation.
L0D0021m
WARNING
It is absolutely forbidden to carry out whatever after-market operation involving
steering system or steering column modifications (e.g.: installation of anti-theft
Device) that could badly affect performance and safety, cause the lapse of
warranty and also result in non-compliance of the car with homologation
requirements.

22
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
Never remove the ignition key while the car is moving. The steering wheel would
automatically lock as soon as you try to turn it. This also applies when the car is
being towed.
WARNING
STEERING COLUMN LOCK
Engaging
When the key is to STOP remove the key and turn
the steering wheel until it locks.Disengaging
Rock the steering wheel slightly as you turn the
ignition key to MAR.

MULTIFUNCTION DISPLAY
(On two-line mode panel)
The “Multifunction display” shows all the useful information
necessary when driving, more particularly:
INFORMATION ON STANDARD SCREEN
❒Mileage recorder (A);
❒Clock (B);
❒Headlight aiming position display (C) (with dipped beam
headlights on).
With ignition key removed and front doors closed the display is off.
With ignition key removed, when opening one of the front doors the
display comes on showing the clock and the total km covered.
If the “Follow me home” function is on (see paragraph “Follow me
home” in this section), the display will show the time the function is
on instead of the mileage recorder indication (see figure).
INFORMATION ABOUT CAR CONDITIONS
❒Trip computer information;
❒Inertial switch operation (at event);
❒Speed limit exceeded (at event).
29
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
L0D0028m
L0D0027m

SET-UP MENU
The “Set-up Menu” enables to perform the following adjustments
and/or settings:
❒SET CLOCK
❒BUZZER VOLUME
❒SPEED LIMIT
❒SET DISTANCE UNIT.
Set clock
The car is delivered with this function set on 24 hours.
Proceed as follows for the required setting:
❒press repeatedly the MODE button until displaying “Hour”;
❒press +to increase by one minute;
❒press –to decrease by one minute.
Keeping buttons +or–pressed for a few seconds obtains automatic
fast increase or decrease, until releasing the buttons.
❒Press MODE button for over 2 seconds to confirm setting.
31
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
L0D0034m