2007 ISUZU KB P190 Electrical

8A-194 ELECTRICAL-BODY AND CHASSIS
HEADLIGHT LEVELING
PARTS LOCATION (RHD)







RTW 78AXF037301 & RTW 78AXF043501

BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

ELECTRICAL-BODY AND CHASSIS 8A-195

PARTS LOCATION (LHD)







RTW 78AXF037401 & RTW 78AXF043601

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007

8A-196 ELECTRICAL-BODY AND CHASSIS

CIRCUIT DIAGRAM C24SE (RHD)


RTW 680XF007601

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007

ELECTRICAL-BODY AND CHASSIS 8A-197

CIRCUIT DIAGRAM C24SE (LHD)


RTW 680XF007501

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007

8A-198 ELECTRICAL-BODY AND CHASSIS

CIRCUIT DIAGRAM 4JJ1-TC / 4JK1-TC EXCEPT SOUTH AFRICA, 4JA1T (L) (LHD)



RTW 78AXF023001


BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

ELECTRICAL-BODY AND CHASSIS 8A-199

HEADLIGHT LEVELING SWITCH
Incorrect beam angle due to load change can be corrected.
A four position switch, 0-3, can alter the beam angle through
1.7 degrees on the long wheel base model and 2.17 degrees
on the short wheel base model.



RTW 68ASH000501
Inspection
Check to see if there is any continuity between the terminals of
the leveling switch.
Replace the switch when the result of inspection is found
abnormal.


RTW 78ASH000601
Removal
Preparation:
Disconnect the battery ground cable.
1. Ventilation grille
2. Harness connector
3. Headlight leveling switch To remove the switch, push the lock from the back side of
the cluster assembly.



Installation
To install, follow the removal steps in the reverse noting the
following point.
1. Push in the switch with your fingers until it locks securely.



BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

8A-200 ELECTRICAL-BODY AND CHASSIS
ILLUMINATION
PARTS LOCATION (RHD)





RTW 78AXF037501 & RTW 78AXF043701

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007

ELECTRICAL-BODY AND CHASSIS 8A-201

PARTS LOCATION (LHD)




RTW 78AXF037601 & RTW 78AXF043801

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007