Page 5787 of 6020
CAB 10-29
Important Operations
1. Front Console Assembly • Refer to Floor Consol in this section.
RTW 6A0SH000101
2. Glove Box
• Remove 2 fixing screws and pull on the handle.
RTW 6A0SH000201
3. Instrument Panel Driver Lower Cover Assembly
1) Remove the engine hood opener 2 fixing screws.
2) Remove the lower cover one fixing screw.
3) Pull out the cover (Stick type parking brake only).
4) Pull out the lower cover assembly.
4. Driver Knee Bolster Assembly
• Remove 4 fixing bolts.
Caution:
For precautions on installation or removal of the SRS-air
bag system, refer to section 9 “Supplemental Restraint
System (SRS) - AIR BAG”
5. Driver Air Bag
6. Steering Wheel/Steering Cowl • Refer to Section 3B “STEERING COLUMN” for steering
lock assembly removal steps.
7. Meter Cluster Assembly
• Pull out the 4 clip positions.
BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007
Page 5791 of 6020
CAB 10-33
19. Front cover
20. Front pillar trim cover
21. Dash side trim cover
22. Meter cluster assembly
▲ 23. Steering wheel/Steering cowl
24. Driver air bag
25. Driver knee bolster assembly
26. Instrument panel driver lower cover assembly
27. Glove box
28. Front console assembly
BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007
Page 5792 of 6020
10-34 CAB
Important Operations
17. Instrument Panel Assembly & Cross Beam 1) Tighten the 4 bolts fixing the cross beam and body panel to the specified torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
19 (1.9/14)
RUW 5A0SH002801
2) A Bolt: Steering Column to Cross Beam
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
20 (2.0/14)
B Bolt: Pedal Bracket to Cross Beam
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
15 (1.5/11)
3) C Bolt: Parking Brake Bracket to Cross Beam
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
15 (1.5/11)
23. Steering Wheel/Steering Cowl • Tighten the steering wheel fixing nut to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
34 (3.5/25)
BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007
Page 5814 of 6020
10-56 CAB
FUEL FILLER LID OPENER LEVER/CABLE
REMOVAL (REGULAR CAB RHD MODEL)
686R300015
Removal Steps
▲ 1. Front sill plate
▲ 2. Fuel filler lid opener cover
▲ 3. Fuel filler lid opener lever
4. Rear wheel housing extension panel
▲ 5. Fuel filler lid cable assembly
BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007
Page 5815 of 6020
CAB 10-57
REMOVAL (EXTEND CAB RHD MODEL)
686R3000016
Removal Steps
▲ 1. Front sill plate
▲ 2. Fuel filler lid opener cover
▲ 3. Fuel filler lid opener lever
4. Rear wheel housing extension panel
▲ 5. Fuel filler lid cable assembly
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5816 of 6020
10-58 CAB
REMOVAL (REGULAR CAB LHD MODEL)
RTW 4A0LF000101
Removal Steps
▲ 1. Front sill plate
▲ 2. Fuel filler lid opener cover
▲ 3. Fuel filler lid opener lever
4. Rear wheel housing extension panel
▲ 5. Fuel filler lid cable assembly
BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007
Page 5817 of 6020
CAB 10-59
REMOVAL (EXTEND CAB LHD MODEL)
RTW 4A0LF000201
Removal Steps
▲ 1. Front sill plate
▲ 2. Fuel filler lid opener cover
▲ 3. Fuel filler lid opener lever
4. Rear wheel housing extension panel
▲ 5. Fuel filler lid cable assembly
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5819 of 6020
CAB 10-61
REMOVAL (CREW CAB RHD MODEL)
686R300010
Removal Steps
▲ 1. Front sill plate
▲ 2. Rear sill plate
3. Center pillar lower trim cover
▲ 4. Fuel filler lid opener cover
▲ 5. Fuel filler lid opener lever
6. Rear wheel housing extension panel
▲ 7. Fuel filler lid cable assembly
BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007
