2007 INFINITI QX56 service

NAVIGATION SYSTEM
AV-127
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
AV
N
O
P
1. Connect NAVI control unit connector and display control unit
connector.
2. Turn ignition switch ON.
3. Display ″Color bar″ by ″CONFIRMATION/ADJUSTMENT″
mode.
4. Check signal between NAVI control unit connector B152 termi-
nal 45 and 47 with CONSULT-ll or oscilloscope.
•When the screen looks reddish.
Voltage signal between NAVI control unit connector B152 terminal
45 and 47.
OK or NG
OK >> Replace display control unit. Refer to AV-145, "Removal and Installation".
NG >> Replace NAVI control unit. Refer to AV-145, "
Removal and Installation".
Color of RGB Image Is Not Proper (Only NAVI Screen Looks Yellowish)INFOID:0000000003533747
1.CHECK RGB HARNESS
1. Turn ignition switch OFF.
2. Disconnect NAVI control unit connector B152 and display control unit connector M95.
3. Check continuity between NAVI control unit and display control unit.
4. Check continuity between NAVI control unit and ground.
•When the screen looks yellowish.
OK or NG
OK >> GO TO 2.
NG >> Repair harness or connector.
2.CHECK RGB SIGNAL45 - 47 : Refer to AV-89, "
Terminal
and Reference Value for
NAVI Control Unit".
WKIA4218E
Te r m i n a l s
Continuity BA
Connector Terminal Connector Terminal
NAVI control
unit: B15246 Display control
unit:
M9548
Ye s
47 45
Te r m i n a l s
Continuity B
—
Connector Terminal
NAVI control unit:
B15246
Ground No
47
WKIA4219E

AV-128
< SERVICE INFORMATION >
NAVIGATION SYSTEM
1. Connect NAVI control unit connector and display control unit
connector.
2. Turn ignition switch ON.
3. Display ″Color bar″ by ″CONFIRMATION/ADJUSTMENT″
mode.
4. Check signal between NAVI control unit connector B152 termi-
nal 46 and 47 with CONSULT-ll or oscilloscope.
•When the screen looks yellowish.
Voltage signal between NAVI control unit connector B152 terminal
46 and 47.
OK or NG
OK >> Replace display control unit. Refer to AV-145, "Removal and Installation".
NG >> Replace NAVI control unit. Refer to AV-145, "
Removal and Installation".
Color of RGB Image Is Not Proper (All Screens Look Bluish)INFOID:0000000003533748
1.CHECK RGB HARNESS
1. Turn ignition switch OFF.
2. Disconnect display control unit connector M95 and display unit connector M93.
3. Check continuity between display control unit and display unit.
4. Check continuity between display control unit and ground.
•When the screen looks bluish.
OK or NG
OK >> GO TO 2.
NG >> Repair harness or connector.
2.CHECK RGB SIGNAL
1. Connect display control unit connector M95 and display unit
connector M93.
2. Turn ignition switch ON.
3. Display “Color bar” by “CONFIRMATION/ADJUSTMENT” mode.
4. Check the following with CONSULT-ll or oscilloscope.
•When the screen looks bluish.
Voltage signal between display control unit connector M95 terminal
50 and 47.46 - 47 : Refer to AV-89, "
Terminal
and Reference Value for
NAVI Control Unit".
WKIA4220E
Te r m i n a l s
Continuity Display control unit Display unit
Connector Terminal Connector Terminal
M9550
M9317
Ye s
47 7
Te r m i n a l s
Continuity Display control unit
—
Connector Terminal
M9550
Ground No
47
SKIA4353E
50 - 47 : Refer to AV-91, "Terminal
and Reference Value for Dis-
play Control unit".SKIA4697E

NAVIGATION SYSTEM
AV-129
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
AV
N
O
P
OK or NG
OK >> Replace display unit. Refer to AV-145, "Removal and Installation".
NG >> Replace display control unit. Refer to AV-145, "
Removal and Installation".
Color of RGB Image Is Not Proper (All Screens Look Reddish)INFOID:0000000003533749
1.CHECK RGB HARNESS
1. Turn ignition switch OFF.
2. Disconnect display control unit connector M95 and display unit connector M93.
3. Check continuity between display control unit and display unit.
4. Check continuity between display control unit and ground.
•When the screen looks reddish.
OK or NG
OK >> GO TO 2.
NG >> Repair harness or connector.
2.CHECK RGB SIGNAL
1. Connect display control unit connector M95 and display unit
connector M93.
2. Turn ignition switch ON.
3. Display “Color bar” by “CONFIRMATION/ADJUSTMENT” mode.
4. Check the following with CONSULT-ll or oscilloscope.
•When the screen looks reddish.
Voltage signal between display control unit connector M95 terminal
52 and 47.
OK or NG
OK >> Replace display unit. Refer to AV-145, "Removal and Installation".
NG >> Replace display control unit. Refer to AV-145, "
Removal and Installation".
Color of RGB Image Is Not Proper (All Screens Look Yellowish)INFOID:0000000003533750
1.CHECK RGB HARNESS
1. Turn ignition switch OFF.
2. Disconnect display control unit connector M95 and display unit connector M93.
3. Check continuity between display control unit and display unit.
4. Check continuity between display control unit and ground.
•When the screen looks yellowish.
Te r m i n a l s
Continuity Display control unit Display unit
Connector Terminal Connector Terminal
M9552
M936
Ye s
47 7
Te r m i n a l s
Continuity Display control unit
—
Connector Terminal
M9552
Ground No
47
SKIA4354E
52 - 47 : Refer to AV-91, "Terminal
and Reference Value for Dis-
play Control unit".SKIA4698E

AV-130
< SERVICE INFORMATION >
NAVIGATION SYSTEM
OK or NG
OK >> GO TO 2.
NG >> Repair harness or connector.
2.CHECK RGB SIGNAL
1. Connect display control unit connector M95 and display unit
connector M93.
2. Turn ignition switch ON.
3. Display “Color bar” by “CONFIRMATION/ADJUSTMENT” mode.
4. Check the following with CONSULT-ll or oscilloscope.
•When the screen looks yellowish.
Voltage signal between display control unit connector M95 terminal
54 and 47.
OK or NG
OK >> Replace display unit. Refer to AV-145, "Removal and Installation".
NG >> Replace display control unit. Refer to AV-145, "
Removal and Installation".
NAVI Screen Is RollingINFOID:0000000003533751
1.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect NAVI control unit connector B152 and display control unit connector M95.
3. Check continuity between NAVI control unit and display control unit.
4. Check continuity between NAVI control unit and ground.
Te r m i n a l s
Continuity Display control unit Display unit
Connector Terminal Connector Terminal
M9554
M9318
Ye s
47 7
Te r m i n a l s
Continuity Display control unit
—
Connector Terminal
M9554
Ground No
47
SKIA4355E
54 - 47 : Refer to AV-91, "Terminal
and Reference Value for Dis-
play Control unit".SKIA4356E
Te r m i n a l s
Continuity BA
Connector Terminal Connector Terminal
NAVI control
unit: B15248 Display control
unit:
M9543
Ye s
49 41
Te r m i n a l s
Continuity B
—
Connector Terminal
NAVI control unit:
B15248
Ground No
49
WKIA4224E

NAVIGATION SYSTEM
AV-131
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
AV
N
O
P
OK or NG
OK >> GO TO 2.
NG >> Repair harness.
2.CHECK RGB SYNCHRONIZING SIGNAL
1. Connect NAVI control unit connector and display control unit
connector.
2. Turn ignition switch ON.
3. Check signal between NAVI control unit connector M95 termi-
nals 48 and 49 with CONSULT-ll or oscilloscope.
OK or NG
OK >> GO TO 3.
NG >> Replace NAVI control unit. Refer to AV-145, "
Removal and Installation".
3.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect display control unit connector M95 and display unit connector M93.
3. Check continuity between display control unit and display unit.
4. Check continuity between display control unit and ground.
OK or NG
OK >> GO TO 4.
NG >> Repair harness.
4.CHECK RGB SYNCHRONIZING SIGNAL
1. Connect display control unit connector and display unit connec-
tor.
2. Turn ignition switch ON.
3. Check signal between display unit connector M93 terminals 19
and 21 with CONSULT-ll or oscilloscope.
OK or NG
OK >> Replace display unit. Refer to AV-145, "Removal and
Installation".
NG >> Replace display control unit. Refer to .48 - 49 : Refer to AV-89, "
Terminal
and Reference Value for NAVI
Control Unit".
WKIA4225E
Te r m i n a l s
Continuity Display control unit Display unit
Connector Terminal Connector Terminal
M9556
M9319
Ye s
49 21
Te r m i n a l s
Continuity Display control unit
—
Connector Terminal
M9556
Ground No
49
WKIA2775E
19 - 21 : Refer to AV-91, "Terminal
and Reference Value for Dis-
play Control unit".
WKIA2022E

AV-132
< SERVICE INFORMATION >
NAVIGATION SYSTEM
Guide Sound Is Not Heard
INFOID:0000000003533752
1.CHECK VOICE GUIDE SETTING
While driving in the dark pink route, voice guide does not operate. (note)
NOTE:
Voice guide is only available at intersections that satisfy certain conditions (indicated by l on the map). There-
fore, guidance may not be given even when the route on the map changes direction.
Is volume setting switched OFF?
YES >> Switch the setting ON and turn the volume up.
NO >> GO TO 2.
2.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect NAVI control unit connector B151 and audio unit connector M45.
3. Check continuity between NAVI control unit and audio unit.
4. Check continuity between NAVI control unit and ground.
Ok or NG
OK >> GO TO 3.
NG >> Repair harness.
3.CHECK VOICE GUIDE
1. Connect NAVI control unit connector and audio unit connector.
2. Turn ignition switch ON.
3. Check signal between NAVI control unit harness connector
B151 terminal 12 and 14 with CONSULT-ll or oscilloscope.
OK or NG
OK >> Replace audio unit. Refer to AV-46, "Removal and
Installation".
NG >> Replace NAVI control unit. Refer to AV-145, "
Removal and Installation".
Screen Is Not ShownINFOID:0000000003533753
1.POWER SUPPLY AND GROUND CIRCUIT CHECK
Check power supply and ground circuit for display unit. Refer to AV-112, "
Power Supply and Ground Circuit
Inspection for Display Unit".
OK or NG
OK >> Replace display unit. Refer to AV-145, "Removal and Installation".
NG >> Check the malfunctioning parts.
Te r m i n a l s
Continuity BA
Connector Terminal Connector Terminal
NAVI control
unit: B15112
Audio unit:
M4571
Ye s
14 69
Te r m i n a l s
Continuity B
—
Connector Terminal (Wire color)
NAVI control unit:
B15112
Ground No
14
WKIA4226E
12 - 14 : Refer to AV-89, "Terminal
and Reference Value for NAVI
Control Unit".
WKIA4227E

NAVIGATION SYSTEM
AV-133
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
AV
N
O
P
A/C Screen Is Not Shown (NAVI Screen Is Shown)INFOID:0000000003533754
1.CHECK IGNITION SIGNAL
Check ignition signal. Refer to AV-117, "
Ignition Signal Inspection for Display Control Unit".
OK or NG
OK >> GO TO 2.
NG >> Check the malfunctioning parts.
2.CHECK CAN COMMUNICATION LINE
Check CAN communication line. Refer to AV-123, "
CAN Communication Line Check".
OK or NG
OK >> Replace display control unit. Refer to AV-145, "Removal and Installation".
NG >> After filling out CAN DIAG SUPPORT MONITOR check sheet, GO TO LAN-40
.
FUEL ECONOMY Screen Is Not ShownINFOID:0000000003533755
1. CHECK IGNITION SIGNAL
Check ignition signal. Refer to AV-116, "
Illumination Signal Inspection for Display Control Unit".
OK or NG
OK >> GO TO 2.
NG >> Check the malfunctioning parts.
2.CHECK CAN COMMUNICATION LINE
Check CAN communication line. Refer to AV-123, "
CAN Communication Line Check".
OK or NG
OK >> Replace display control unit. Refer to AV-145, "Removal and Installation".
NG >> After filling out CAN DIAG SUPPORT MONITOR check sheet, GO TO LAN-40
.
Average Fuel Economy Display Is Not Shown (" *** " Is Shown)INFOID:0000000003533756
1.CHECK VEHICLE SPEED SIGNAL
Check vehicle speed signal. Refer to AV-115, "
Vehicle Speed Signal Inspection for Display Control Unit".
OK or NG
OK >> GO TO 2.
NG >> Check the malfunctioning parts.
2.CHECK CAN COMMUNICATION LINE
Check CAN communication line. Refer to AV-123, "
CAN Communication Line Check".
OK or NG
OK >> Replace display control unit. Refer to AV-145, "Removal and Installation".
NG >> After filling out CAN DIAG SUPPORT MONITOR check sheet, GO TO LAN-40
.
Distance to Empty Display Is Not Shown (" *** " Is Shown)INFOID:0000000003533757
1.CHECK SPEEDOMETER
Confirm that speedometer is functioning.
Is speedometer functioning?
YES >> GO TO 2.
NO >> Refer to DI-17, "
Vehicle Speed Signal Inspection".
2.CHECK FUEL GAUGE
Confirm that fuel gauge is functioning.
Is fuel gauge functioning?
YES >> GO TO 3.
NO >> Refer to DI-18, "
Fuel Level Sensor Unit Inspection".

AV-134
< SERVICE INFORMATION >
NAVIGATION SYSTEM
3.CHECK CAN COMMUNICATION LINE
Check CAN communication line. Refer to AV-123, "
CAN Communication Line Check".
OK or NG
OK >> Replace display control unit. Refer to AV-145, "Removal and Installation".
NG >> After filling out CAN DIAG SUPPORT MONITOR check sheet, GO TO LAN-40
.
Driving Distance or Average Speed Display Is Not Shown (" *** " Is Shown)
INFOID:0000000003533758
1. CHECK IGNITION SIGNAL
Check ignition signal. Refer to AV-117, "
Ignition Signal Inspection for Display Control Unit".
OK or NG
OK >> GO TO 2.
NG >> After filling out CAN DIAG SUPPORT MONITOR check sheet, GO TO LAN-40
.
2.CHECK VEHICLE SPEED SIGNAL
Check vehicle speed signal. Refer to AV-115, "
Vehicle Speed Signal Inspection for Display Control Unit".
OK or NG
OK >> Replace display control unit. Refer to AV-145, "Removal and Installation".
NG >> Check the malfunctioning parts.
WARNING DOOR OPEN Screen Is Not ShownINFOID:0000000003533759
1. CHECK IGNITION SIGNAL
Check ignition signal. Refer to AV-117, "
Ignition Signal Inspection for Display Control Unit".
OK or NG
OK >> GO TO 2.
NG >> Check the malfunctioning parts.
2.CHECK VEHICLE SPEED SIGNAL
Check vehicle speed signal. Refer to AV-115, "
Vehicle Speed Signal Inspection for Display Control Unit".
OK or NG
OK >> GO TO 3.
NG >> Check the malfunctioning parts.
3.CHECK CAN COMMUNICATION LINE
Check CAN communication line. Refer to AV-123, "
CAN Communication Line Check".
OK or NG
OK >> Replace display control unit. Refer to AV-145, "Removal and Installation".
NG >> After filling out CAN DIAG SUPPORT MONITOR check sheet, GO TO LAN-40
.
Unable to Operate All of AV Switches (Unable to Start Self-Diagnosis)INFOID:0000000003533760
1.CHECK POWER SUPPLY AND GROUND CIRCUIT
Check power supply and ground circuit for AV switch. Refer to AV-113, "
Power Supply and Ground Circuit
Inspection for AV Switch".
OK or NG
OK >> GO TO 2.
NG >> Check the malfunctioning parts.
2.AV SWITCH SELF-DIAGNOSIS
AV switch self-diagnosis. Refer to AV-110, "
AV Switch Self-Diagnosis Function".
OK or NG
OK >> GO TO 3.
NG >> Check the malfunctioning parts.