2007 INFINITI QX56 service

AUDIO
AV-39
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
AV
N
O
P
Sound Is Not Heard from Front Door Speaker or Front TweeterINFOID:0000000003533683
1.HARNESS CHECK
1. Disconnect BOSE speaker amp. connector M113 and suspect speaker connector.
2. Check continuity between BOSE speaker amp. harness connec-
tor terminal M113 and suspect speaker harness connector ter-
minal.
3. Check continuity between BOSE speaker amp. harness connec-
tor terminal M113 and ground.
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.FRONT SPEAKER SIGNAL CHECK
1. Connect BOSE speaker amp. connector M113 and suspect speaker connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
Te r m i n a l s
Continuity BOSE speaker amp. Speaker or tweeter
Connector Terminal Connector Terminal
M11313
D12+
Ye s 14 -
15
D112+
16 -
13
M109+
14 -
15
M 111+
16 -
Te r m i n a l s
Continuity BOSE speaker amp.
—
Connector Terminal
M11313
Ground No 14
15
16
WKIA2018E

AV-40
< SERVICE INFORMATION >
AUDIO
4. Check the signal between BOSE speaker amp. harness connec-
tor M113 terminals with CONSULT-II or oscilloscope.
OK or NG
OK >> Replace suspect speaker. Refer to AV-46, "Removal
and Installation" or AV-46, "Removal and Installation".
NG >> GO TO 3.
3.HARNESS CHECK
1. Disconnect audio unit connector M43 and BOSE speaker amp. connector M113.
2. Check continuity between audio unit harness connector termi-
nals and BOSE speaker amp. harness connector terminals.
3. Check continuity between audio unit harness connector terminal
and ground.
OK or NG
OK >> GO TO 4.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
4.FRONT SPEAKER SIGNAL CHECK
1. Connect audio unit connector and BOSE speaker amp. connector.
2. Turn ignition switch ACC.
Te r m i n a l s
Condi-
tionReference
signal (+) (-)
Con-
nectorTe r m i n a lCon-
nectorTe r m i n a l
M11313
M11314
Re-
ceive
audio
signal 15 16
WKIA4555E
SKIA0177E
Te r m i n a l s
Continuity Audio unit BOSE speaker amp.
Connector Terminal Connector Terminal
M431
M11329
Ye s 230
327
428
Te r m i n a l s
Continuity Audio unit
—
Connector Terminal
M431
Ground No 2
3
4
SKIA4284E

AUDIO
AV-41
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
AV
N
O
P
3. Push “POWER” switch.
4. Check the signal between audio unit harness connector termi-
nals with CONSULT-II or oscilloscope.
OK or NG
OK >> Replace BOSE speaker amp. Refer to AV-46, "Removal
and Installation".
NG >> Replace audio unit. Refer to AV-46, "
Removal and
Installation".
Sound Is Not Heard from Rear Door Speaker or Rear Door TweeterINFOID:0000000003533684
1.HARNESS CHECK
1. Disconnect BOSE speaker amp. connector M113 and suspect
speaker connector.
2. Check continuity between BOSE speaker amp. harness connec-
tor terminal M113 and suspect speaker harness connector ter-
minal.
3. Check continuity between BOSE speaker amp. harness connec-
tor M113 terminal and ground.
Te r m i n a l s
Condi-
tionReference
signal (+) (-)
Con-
nectorTe r m i -
nalCon-
nectorTe r m i -
nal
M432
M431
Receive
audio
signal 43
WKIA4553E
SKIA0177E
Te r m i n a l s
Continuity BOSE speaker amp. Speaker or tweeter
Connector Terminal Connector Terminal
M1139
D207+
Ye s 10 -
11
D307+
12 -
9
D208+
10 -
11
D308+
12 -
WKIA1635E

AV-42
< SERVICE INFORMATION >
AUDIO
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.REAR SPEAKER SIGNAL CHECK
1. Connect BOSE speaker amp. connector M113 and suspect speaker connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between BOSE speaker amp. harness connec-
tor M113 terminals with CONSULT-II or oscilloscope.
OK or NG
OK >> Replace suspect speaker. Refer to AV-46, "Removal
and Installation" or AV-46, "Removal and Installation".
NG >> GO TO 3.
3.HARNESS CHECK
1. Disconnect audio unit connector M44 and BOSE speaker amp. connector M113.
Te r m i n a l s
Continuity BOSE speaker amp.
—
Connector Terminal
M1139
Ground No 10
11
12
Te r m i n a l s
Condi-
tionReference
signal (+) (-)
Con-
nec-
torTe r m i n a lCon-
nec-
torTe r m i n a l
M1139
M11310
Re-
ceive
audio
signal 11 1 2
WKIA4557E
SKIA0177E

AUDIO
AV-43
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
AV
N
O
P
2. Check continuity between audio unit harness connector M44 ter-
minals and BOSE speaker amp. harness connector M113 termi-
nals.
3. Check continuity between audio unit harness connector terminal
and ground.
OK or NG
OK >> GO TO 4.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
4.REAR SPEAKER SIGNAL CHECK
1. Connect audio unit connector M44 and BOSE speaker amp. connector M113.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between audio unit harness connector M44
terminals with CONSULT-II or oscilloscope.
OK or NG
OK >> Replace BOSE speaker amp. Refer to AV-46, "Removal
and Installation".
NG >> Replace audio unit. Refer to AV-46, "
Removal and
Installation".
Te r m i n a l s
Continuity Audio unit BOSE speaker amp.
Connector Terminal Connector Terminal
M4413
M11325
Ye s 14 26
15 23
16 24
Te r m i n a l s
Continuity Audio unit
—
Connector Terminal
M4413
Ground No 14
15
16
SKIA4315E
Te r m i n a l s
Condi-
tionReference
signal (+) (-)
Con-
nectorTe r m i -
nalCon-
nectorTe r m i n a l
M4414
M4413
Re-
ceive
audio
signal 16 15
WKIA4558E
SKIA0177E

AV-44
< SERVICE INFORMATION >
AUDIO
Sound Is Not Heard from Center Speaker
INFOID:0000000003533685
1.HARNESS CHECK
1. Disconnect BOSE speaker amp. connector M112 and center speaker connector M110.
2. Check continuity between BOSE speaker amp. harness connec-
tor M112 terminals and center speaker harness connector M110
terminals.
3. Check continuity between BOSE speaker amp. harness connec-
tor M112 terminals and ground.
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.CENTER SPEAKER SIGNAL CHECK
1. Connect BOSE speaker amp. connector M112 and center speaker connector M110.
2. Turn ignition switch to ACC.
3. Push the “POWER” switch.
4. Check the signal between BOSE speaker amp. harness connec-
tor M112 terminals with CONSULT-II or oscilloscope.
OK or NG
OK >> Replace center speaker. Refer to AV-46, "Removal and Installation".
NG >> Replace BOSE speaker amp. Refer to AV-46, "
Removal and Installation".
Sound Is Not Heard from SubwooferINFOID:0000000003533686
1.CHECK FUSE
Te r m i n a l s
Continuity BOSE speaker amp. Center speaker
Connector Terminal Connector Terminal
M1122
M110-
Ye s
18 +
Te r m i n a l s
Continuity BOSE speaker amp.
—
Connector Terminal
M1122
Ground No
18
WKIA1222E
Te r m i n a l s
Condi-
tionReference
signal (+) (-)
Con-
nec-
torTe r m i n a lCon-
nec-
torTe r m i n a l
M112 18 M112 2Re-
ceive
audio
signal
WKIA1223E
SKIA0177E

AUDIO
AV-45
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
AV
N
O
P
Check that the following fuse is not blown.
OK or NG
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of blown fuse before installing new fuse. Refer to PG-
3.
2.POWER SUPPLY CIRCUIT CHECK
1. Disconnect subwoofer connector.
2. Check voltage between the subwoofer and ground.
OK or NG
OK >> GO TO 3.
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
3.GROUND CIRCUIT CHECK
Check continuity between subwoofer harness connector B72 termi-
nal 5 and ground.
OK or NG
OK >> GO TO 4.
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
4.CHECK SUBWOOFER AMP. ON SIGNAL
1. Operate system and check voltage between subwoofer harness
connector B72 terminal 4 and ground.
OK or NG
OK >> GO TO 5.
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
5.HARNESS CHECK
1. Disconnect BOSE speaker amp. connector M112 and subwoofer connector B72.
Unit Terminal Signal name Fuse No.
Subwoofer 6 Battery power 17
UnitTerminal No.
OFF ACC ON (+)
(-)
Connector Terminal
Subwoof-
erB72 6 GroundBattery
voltageBattery
voltageBattery
voltage
WKIA1601E
Continuity should exist.
WKIA1602E
Voltage : More than approx. 6.5V
WKIA2078E

AV-46
< SERVICE INFORMATION >
AUDIO
2. Check continuity between BOSE speaker amp. harness connec-
tor terminal and subwoofer harness connector harness connec-
tor terminal.
3. Check continuity between BOSE speaker amp. harness connec-
tor terminal and ground.
OK or NG
OK >> GO TO 6.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
6.SUBWOOFER SIGNAL CHECK
1. Connect BOSE speaker amp. connector and subwoofer connector.
2. Turn ignition switch to ACC.
3. Check the signal between BOSE speaker amp. harness connec-
tor terminals with CONSULT-II or oscilloscope.
OK or NG
OK >> Replace subwoofer. Refer to AV-46, "Removal and Installation".
NG >> Replace BOSE speaker amp. Refer to AV-46, "
Removal and Installation".
Removal and InstallationINFOID:0000000003533687
AUDIO UNIT
Removal
1. Remove cluster lid C. Refer to IP-10.
Te r m i n a l s
Continuity BOSE speaker amp. Subwoofer
Connector Terminal Connector Terminal
M1123
B721
Ye s
19 2
Te r m i n a l s
Continuity BOSE speaker amp.
—
Connector Terminal
M1123
Ground No
19
WKIA1604E
Te r m i n a l s
Condi-
tionReference
signal (+) (-)
Con-
nec-
torTe r -
minalCon-
nec-
torTe r -
minal
M112 19 M112 3Receive
audio
signal
WKIA1170E
SKIA0177E