TF-154
< SERVICE INFORMATION >
TRANSFER ASSEMBLY
CAUTION:
Do not reuse oil pressure check plug.
21. Install the new snap ring to the clutch hub using suitable tool.
CAUTION:
Do not reuse snap ring.
22. Apply petroleum jelly to the needle bearing, and install the nee-
dle bearing, spacer, clutch drum and clutch hub to the main-
shaft.
23. Install the new snap ring to the mainshaft.
CAUTION:
Do not reuse snap ring.
24. Apply ATF to each plate, then install them into the clutch drum
as shown.
WDIA0101E
WDIA0129E
SDIA2192E
SDIA2193E
