2007 FIAT GRANDE PUNTO display

3333
PLAYING AUDIO TRACKS
Shuffle playback of the whole
media library
Option “PLAY ANYTHING” shall be
used to play quickly the whole content of
your media library at random.
?
To start “PLAY ANYTHING” us-
ing manual interaction, proceed as
follows:
Launch the Main Menu, select ME-
DIA PLAYER, and then press
SRC/OKor
ß/MAIN.
Select PLAY ANYTHINGand
press SRC/OKor
ß/MAIN.
}
Or, using voice interaction:
Press
‘and pronounce “Play
anything”.
For further details on digital audio
files playback, refer to section “DIG-
ITAL AUDIO SELECTION”.Now playing (track data)
With the NOW PLAYINGoption you
can display current track data for 15 sec-
onds.
?
To start this option using manual in-
teraction, proceed as follows:
Launch the Main Menu, select ME-
DIA PLAYER, and then press
SRC/OKor
ß/MAIN.
Select NOW PLAYINGand then
press SRC/OKor
ß/MAIN.
}
Or, using voice interaction:
Press
‘and pronounce “Now
playing”.
Note
When the playback of a digital audio track
is started, the relevant track data will be
automatically displayed for 15 seconds.Audio play
?
To start playing an audio file using
manual interaction, proceed as fol-
lows:
If “AUTOPLAY” option is on,
connect your USB device to
Blue&Me™ Nav: track playback
will start automatically.
SETTINGS FUNCTION -MEDIA
PLAYER.
You can also select the required au-
dio file and then press SRC/OKor
ß/MAINto start playing it.
}
Or, using voice interaction:
Press
‘and pronounce “Play
anything”.
Pause
To pause the track being played: Press
&/ESC or button MUTEon sound sys-
tem front panel.
Play
To resume playback of the paused track:
Press
&/ESCor button MUTEon
sound system front panel.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 33

36
FUNCTIONS OF THE
NAVIGATION SYSTEM
Blue&Me™ Navleads you to your cho-
sen destination quickly and safely by means
of its navigation function by means of voice
synthesis and pictograms that appear on a
reconfigurable multifunction display on the
control panel. The navigation system al-
lows you to navigate towards a destina-
tion address, to call up programmed des-
tinations or points of interest (e.g.: hotels,
restaurants, chemists, airports, railway sta-
tions, authorised workshops etc.). The
car’s position is determined by the GPS
(Global Position System), by processing
signals from GPS satellites and the car’s
odometric signals. Blue&Me™ Navus-
es digital mapping data preloaded onto
your USB device to lead you to your de-
sired destination by the best possible
route from your current location.Notes
❒GPS reception is difficult under trees,
among tall buildings, in covered car-
parks, in tunnels and in any place where
the satellite aerial reception may be hin-
dered.
❒The Blue&Me™ Navnavigator takes
a few minutes to determine the car’s
new position if the car is moved with
the system turned off (e.g. after trans-
porting the car on a ferry).
❒If the vehicle battery is disconnected,
the GPS takes about 15 minutes to ac-
tivate.
❒The system is equipped with a self-cal-
ibration function that needs to oper-
ate for about 100 km when the system
is first turned on or if the tyres are
changed. During this stage, the position
could be calculated with less accuracy.
❒Under continuous conditions of low
wheel grip (e.g. when skidding on ice),
the system may temporarily record an
inaccurate position.
Navigation display
On the control panel reconfigurable mul-
tifunction display (see fig. 3), the ma-
noeuvres to be carried out (right turn, left
turn, drive round round-about, go straight
on or change direction) are displayed by
means of pictograms.The display also indicates the name of the
current street and the distance to the next
turn-off. The name shown near the turn-
off is that of the street where the ma-
noeuvre is to be carried out.
A– Navigation pictogram
B– Distance to the next turn-off
C– Street name
Voice messages
The voice messages issued by the system
recommend all manoeuvres to be carried
in plenty of time: in particular, advance
warning of the manoeuvre to be carried
out is given, followed by detailed instruc-
tions on when to carry out the manoeu-
vre.
To repeat the last voice message, press
the
‘key and say “Next maneuver”.
The instructions provided by
Blue&Me™ Nav do not ex-
onerate the driver from full responsi-
bility for any manoeuvres carried out
in traffic while driving the car and for
respecting the highway code and oth-
er road traffic regulations. Responsi-
bility for road safety always lies with
the driver of the car under all circum-
stances.
WARNING
fig. 3F0M0373m
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 36

37
START NAVIGATION
Proceed as follows to begin using the
Blue&Me™ Navnavigation function:
❒Connect your USB device with pre-
loaded maps to the USB port on the ve-
hicle.
❒Turn the ignition key to MAR.
Note:
For reasons of road safety, some func-
tions, such as input of a new destination,
are allowed on with the vehicle at a stand-
still.
To activate the NAVIGATIONmenu in
manual mode, proceed as follows:
?
❒Press the NAVkey near the front
courtesy light (see fig. 1).
❒Or, with the Main Menu on, press
ß/MAIN, select the Navigation option
and press SRC/OKor
ß/MAIN.
Blue&Me™ Navwill show the following
warning message on the display THE
DRIVER MUST RESPECT THE
ROAD RULES. Press SRC/OKto con-
firm.Now you can access the submenus dedi-
cated to the Blue&Me™ Navnavigation
functions:
❒NEW DESTINATION
❒RESUME NAVIGATION
❒ARRIVAL INFORMATION
❒STOP NAVIGATION
❒RECENT DESTINATIONS
❒NAVIGATION SETTINGS
❒VEHICLE POSITION
❒ROUTE SIMULATION
Scroll to the required function using the
Nor Okeys and press SRC/OKor
ß/MAINto confirm.
}
Or with voice interaction:
Press
‘and say “Navigation”.
Blue&Me™ Navwill show the fol-
lowing warning message on the dis-
play THE DRIVER MUST RE-
SPECT THE ROAD RULES. Press SRC/OKto confirm (no spe-
cific voice command is available in
this event).Blue&Me™ Nav
will display a list of the available sub-
menus.
Speak one of the following com-
mands to gain access to the required
function:
❒New destination
❒Resume navigation
❒Arrival information
❒Stop navigation
❒Recent destinations
❒Navigation settings
❒Vehicle position
❒Route simulation
Note:
Some submenus may not be available since
they are activated only once navigation to-
wards a destination has started.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 37

38
New destination
The NEW DESTINATIONmenu al-
lows you to enter a destination in various
ways:
❒ADDRESS: set the address by choos-
ing a town/city centre or the required
street;
❒POINTS OF INTEREST: select a
point of interest from the relevant sub-
menu.
Address
Use this menu to enter the address of
your required destination, indicating the
country, the town/city, the name of the
road/street and the house number.
?
To enter an address using manual in-
teraction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.
Select the NEW DESTINATION
option by pressing SRC/OKor
ß/MAIN.
Select ADDRESSand then press
SRC/OKor
ß/MAIN.
}Or use voice interaction by pressing
‘and saying “Navigation”. Once
the system message has finished, say
“New destination” and then “Ad-
dress”.
Blue&Me™ Navstarts by asking
your to select the required country
name.
Before anything else, the system de-
termines which countries are pre-
loaded on your USB device. If the
maps for only one country are pre-
sent, this will be set as the destina-
tion country.Use the “
N” or “O” keys to select the
required country and press SRC/OKor
ß/MAINto confirm.
}Using voice interaction, say the re-
quired country. Blue&Me™ Nav
will ask you to confirm the select-
ed country by means of a voice
message.
Notes:
❒In order to select the country, the USB
device containing the maps must be in-
serted in the USB port on the car.
❒If several countries are loaded on your
USB device, Blue&Me™ Navwill
show a list of countries in alphabetical
order on the multifunction display. If
the system is able to detect the GPS po-
sition of the car, the country where you
are located will be shown at the head
of the list.
After selecting the country, Blue&Me™
Navwill ask you to enter the destination
town/city by means of the steering wheel
control and voice interaction.For road safety reasons, it is
only possible to enter a new
destination with the car at a stand-
still.
WARNING
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 38

39
Procedure for entering destination
TOWN/CITY
The area of the control panel multifunc-
tion display you use to enter the town/city
name is made up as follows:
A- Blue&Me™ Navuses the firstrow
to tell you that you are currently in
town/city input mode.
B– The secondrow displays the char-
acters already entered into Blue&Me™
Nav, which are used to make up the des-
tination town/city name.
C– The thirdrow is used to display the
character selected using SRC/OKor
ß/MAIN.
D– The fourthrow is made up of two
parts: you may scroll through the charac-
ters shown on the left side of the display
using the “
N” key and those displayed on
the right part using the “O” key.Once you have entered two characters,
Blue&Me™ Navwill help you by dis-
playing only the letters that could poten-
tially be used to compose the final name
of the town/city according to the map in-
formation stored in your USB device.
Operation of steering wheel keys
during TOWN/CITY name input
❒KEY“N”
– Allows you to scroll through the
characters shown on the leftside
of the fourth row of the display.
– Once you have entered two char-
acters, if you press the “
N” key
once, you will be given the option
of deleting the last character en-
tered; press SRC/OKor
ß/MAIN
to delete.Press the “N” key
again to continue entering charac-
ters.
❒KEY“O”
– Allows you to scroll through the
characters shown on the rightside
of the fourth row of the display.
– Once you have entered two char-
acters, if you press the “
O” key
once, OK?will be displayed on the
third row of the display. This
prompts you to stop entering char-
acters and instead choose the
town/city name from a list. You are
only advised to use this option if the
name of the town/city shown on
the second row is the full name of
the required town/city. Press
SRC/OKor
ß/MAINto confirm.-
Press the “
O” key again to contin-
ue entering characters.
❒“&/ESC” KEY
– Press the
&/ESCkey to return to
the previous menu.
fig. 4F0M1032g
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 39

40
?}
Proceed as follows to enter
the town/city name:
Scroll through the characters in the
fourthrow using the “
N” or “O” keys
until the required characters are displayed
on the third row. Press SRC/OKor
ß/MAINto select the character.
Proceed in the same way to select the fol-
lowing characters that make up part of the
town/city name in the second row.
Press the “
N” key to delete the last char-
acter entered. The system will ask you to
confirm the deletion by pressing SRC/OK
or
ß/MAIN. If you are using voice inter-
action, press
‘and say “Delete”.
As soon as you have entered enough char-
acters, Blue&Me™ Navmay prompt
you to say the required town/city. Press
‘and say the name of the town/city.
You still have the option of continuing to
enter the destination town/city manually.
Depending on the number of characters
entered Blue&Me™ Navwill display a
list of towns/cities whose names meet the
current search criteria. Scroll through the
list using the “
N” or “O” keys and press
SRC/OKor
ß/MAINto confirm. Al-
ternatively, you may say the name of the
required town/city directly.Notes
❒If the system is able to detect the car’s
GPS position, it will suggest the
town/city where you are currently lo-
cated as the destination town/city.
❒If the town/city name is made up of sev-
eral words, you only need to enter one
of the words making up the town/city
name.
❒If the name of the town/city displayed
in the second row (see fig. 4) is the full
name of the required town/city, you can
stop entering characters and select the
town/city from the list by pressing “
O”
once. The message OK?will appear on
the third row of the display. Press
SRC/OKor
ß/MAINto confirm. If
using voice interaction, press ‘ and say
“OK”.
If you wish to disable voice input of the
town/city, refer to the NAVIGATION
SETTINGS – DICTATE DESTINATION
section.
Once you have selected the town/city,
Blue&Me™ Navwill ask you to enter
the name of the Road/Street or to navi-
gate toward the city centre using the fol-
lowing menu:
❒ENTER ROAD
❒CITY CENTRE
?Using manual interaction:
Select the required option using the
“
N” or “O” keys and press
SRC/OKor
ß/MAINto confirm.
}Or with voice interaction: say
“Road” or “City centre”.
If you choose City centre, the system
will display the full address and ask you
to confirm in order to begin navigation.
If you select Enter roadinstead, you
must enter the destination road/street in
the same way as when you entered
the town/city.
Notes
❒When entering the name of the road,
omit the type of road/street (road,
street, avenue etc.).
❒If the road/street name is made up of
several words, you only need to enter
one of the words making up the
road/street name.
If you wish to disable voice input of the
road street, refer to the NAVIGATION
SETTINGS – DICTATE DESTINATION
section.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 40

41
After entering the destination Road/Street,
Blue&Me™ Navwill ask you if you wish
to enter a house numberor navigate to-
wards the address currently set. The avail-
able options are:
❒ENTER NUMBER
❒START NAVIGATION
?Using manual interaction:
Select the required option using the “
N”
or “O” keys and press SRC/OKor
ß/MAINto confirm.
}Or using voice interaction, say “En-
ter number” or “Start”.
If you choose Start navigation, the sys-
tem will display the full address and ask
you to confirm in order to begin naviga-
tion. If the address entered is ambiguous,
the system will prompt you to choose be-
tween the possible alternatives.
If you choose Enter number, you must
enter the house number of the chosen
destination address.
?
Proceed as follows to enter the
house number:
Scroll through the numbers in the fourth
row (see fig. 4) using the “
N” or “O”
keys until the required numbers are dis-
played on the third row. Press SRC/OK
or
ß/MAINto select the number. Pro-
ceed in the same way to select the fol-
lowing numbers until the full house num-
ber is displayed in the second row.
Press the “
N” key to delete the last num-
ber entered. The system will ask you to
confirm the deletion by pressing SRC/OK
or
ß/MAIN. If you are using voice inter-
action, press
‘and say “Delete”.
Press the “
O” key once to finish enter-
ing the house number displayed. The sys-
tem will ask you to confirm by pressing
SRC/OKor
ß/MAIN. If you are using
voice interaction, press ‘ and say “OK”.
Once you have entered the house num-
ber Blue&Me™ Navwill display the full
address and ask for confirmation in order
to begin navigation. If the address entered
is ambiguous, the system will prompt you
to choose between the possible alterna-
tives.Note
While entering the house number, both
numbers and letters are shown on the
fourthrow (see fig. 4) of the reconfig-
urable multifunction display; in the event
of future map software updates, these will
allow you to set particular types of num-
bering that require the use of alphanu-
merical characters.
Points of interest
This function gives you access to a file con-
taining information on the location of use-
ful destinations of general interest divided
by category (e.g.: hotels, restaurants,
chemists, airports, railway stations, au-
thorised workshops etc.).
To use this function, your USB device with
the preloaded map software must be con-
nected to the USB port on the car.
?
To select a Point of interest using
manual interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.
Select the option NEW DESTI-
NATIONby pressing SRC/OKor
ß/MAIN.
Select POINTS OF INTEREST
and press SRC/OKor
ß/MAINto
confirm.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 41

42
Blue&Me™ Navwill display a list of
available points of interest categories.
Choose the required category from those
stored in the map software on your USB
device using the “
N“ or “O“ device and
press SRC/OKor
ß/MAINto confirm.
Now Blue&Me™ Navwill prompt you
to choose between LOCAL POINTS
of interest or ELSEWHERE.
❒If you select LOCAL POINTSof in-
terest by pressing SRC/OKor
ß/MAIN, Blue&Me™ Navwill dis-
play a list of points of interest belong-
ing to the category selected previously
(e.g. restaurants), sorted according to
distance from your current location, in-
cluding distanceand name. Scroll
through the list using the “
N” or “O”
keys and press SRC/OKor
ß/MAIN
to select the point of interest.
❒If you select points of interestELSE-
WHERE Blue&Me™ Navwill ask
you to specify the point of interest
country and town/city, in the same way
as when entering an address.
Blue&Me™ Navwill display a list of
points of interest in the chosen cate-
gory in alphabetical order.
Scroll through the list using the “
N”
or “O” keys and press SRC/OKor
ß/MAINto select the point of inter-
est required.Note
If the point of interest selected using the
previous options has a telephone number
and your Bluetooth
®mobile phone is
connected to Blue&Me™ Nav, the sys-
tem will allow you to decide whether to
start navigating toward the chosen point
of interest or make a phone call. Select the
required option by pressing SRC/OKor
ß/MAIN.
}Or use voice interaction by press-
ing
‘and saying “Navigation”.
Once the system message has fin-
ished, say “New destination” and
then “Points of interest”.
Then say “List” e Blue&Me™ Nav
will provide you with a list of the available
categories. If you already know which of
the categories stored on your USB device
you require you may say it directly.
Refer to the “NAVIGATION VOICE
COMMANDS” section for a list of avail-
able categories.The system will ask you for confirmation,
say “Yes“ or press SRC/OKor
ß/MAIN. Otherwise say “No“.
Now Blue&Me™ Navwill prompt you
to choose between “local” points of in-
terest or “elsewhere” by means of voice
synthesis.
❒If you select “local”, Blue&Me™
Navwill display a list of points of in-
terest belonging to the category se-
lected previously (e.g. restaurants),
sorted according to distance from your
current location, including distance
and name.
Scroll through the list using the “
N” or
“O” keys and press SRC/OKor
ß/MAINto select the required point
of interest.
❒If you say “elsewhere” Blue&Me™
Navwill ask you to specify the point of
interest country and town/city, in the
same way as when entering an address.
Blue&Me™ Navwill display a list of
points of interest in the chosen cate-
gory in alphabetical order.
Scroll through the list using the “
N” or
“O” keys and press SRC/OKor
ß/MAINto select the point of inter-
est required.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 42