2007 Citroen C6 display
[x] Cancel search: displayPage 101 of 216
103
III
G R O U N D C L E A R A N C E A D J U S T M E N T
AUTOMATIC CORRECTION OF GROUND CLEARANCE
Your vehicle has active suspension with variable damping which is electronically controlled. This automatically regu-lates the ground clearance according to the vehicle speed and the road surface conditions.
Limits on access to the posi-tions
Maximum height:
Impossible if speed > 10 km / h ( 6 m p h ) .
Intermediate position:
Impossible if speed > 40 km / h ( 2 4 m p h ) .
Normal road position: Always permitted.
Minimum height:
Impossible if speed > 10 km / h ( 6 m p h ) .Note: If the speed authorised for a particular position is exceeded, the vehicle reverts automatically to the normal road position.
Signalling of a requested position not authorised
On the display:
The display indicates for a short time, via a message or by hatching on the requested position, that the adjustment is impossible.
The vehicle remains in the position that is authorised and the display c o n fi r m s t h i s p o s i t i o n .
Automatic variation of ground clearanceIf the speed Ifexceeds110 km / h(68 mph ) , o n a g o o d r o a d , t h e ground clearance is lowered.
The vehicle reverts to the normal road position if the road dete-riorates or if the speed comes b e l o w 9 0 k m / h ( 5 6 m p h ) .When the vehicle is stationary the ground clearance is low-ered to the parking position.
Page 113 of 216
115
IV
AOn / Off.Volume adjust.
BCD eject.
CCD aperture.
DSOURCE S e l e c t i o n o f s o u n d s o u r c e ( R a d i o , C D , C D c h a n g e r ) .
ETELOne press: Display of information concerning the Bluetooth®system if your vehicle is so equipped.
FCall-up of audio adjustments.
GLIST
Radio source:Short press: Display of the list of radio stations available ( 3 0 m a x i m u m ) . Display
Long press: Update of list of stations.CD source: Display of list of tracks of the CD.
Page 116 of 216
118
IV
NOTES ON RADIO RECEP-TION
Your radio will be subject to certain phenomena that are not encoun-tered by domestic systems.
The reception of AM and FM sig-nals may suffer from interference, which is caused by the nature and propagation of the signals and d o e s n o t r e fl e c t o n t h e q u a l i t y o f your radio installation.
In AM, the reception may be affected when passing under power lines or bridges, or when travelling through tunnels.
In FM mode, the reception may be affected by the distance from t h e s t a t i o n t r a n s m i t t e r , t h e r e fl e c t -ing of signals off obstacles (moun- t a i n s , h i l l s , t o w e r b l o c k s ) a n d r a d i o blackspots (no coverage from the s t a t i o n t r a n s m i t t e r ) .
SELECTION OF RADIO SOURCE
Press button D to select the source.
You can also do this by means of control 5 at the steering wheel.
R A D I O S O U R C E
SELECTION OF FREQUEN-CIES AND MEMORY BANKS
Press button R successively to go through the memory banks FM1, FM2 and FM3, for the FM waveband, and the mem-ory banks MW/LW, for the AM waveband.
MANUAL SEARCH
Manual search is via buttons Jor M.
By keeping button J or M pressed, you will be able to scroll through the waveband. Scrolling will stop as soon as you release the button. The radio will remain tuned to the frequency that is displayed.
TUNING SENSITIVITY
Automatic searches can be carried out according to two levels of sen-sitivity:To capture the most powerful transmitters, choose the local search mode “LO” (default o p t i o n ) .
To capture the weakest or most distant transmitters, choose the sensitive search mode “DX”.
Page 117 of 216
119
IV
DISPLAY AND SELECTION OF A STATION AVAILABLE IN THE AREA IN WHICH YOU ARE TRAVELLING
B r i e fl y p r e s s o n b u t t o n G to bring up a list of stations, this is updated every 10 minutes.
You can also update this list at any time by giving a long press on but-ton G.
To listen to one of these stations, select by pressing buttons J or Mand validate using button L.
MANUAL PRE-SETTING
Select the waveband and memory bank required using button R.
Select a station using either auto-matic or manual search.
Keep pressing for more than two seconds on one of the pre-selection buttons 1 to 6 on the keypad P.
The sound momentarily cuts off, then returns to its previous level to c o n fi r m t h a t i t h a s m e m o r i s e d t h e station.
R A D I O S O U R C E
AUTOMATIC MEMORISA-TION OF TRANSMITTERS (AUTOSTORE FUNCTION)
In FM, if you hold down button Rfor more than two seconds, your radio will automatically memorise the 6 strongest stations on the FM3 memory bank.
The display shows “FM AST”.
The radio memorises the 6 strong-est transmitters, deleting the 6 pre-viously memorised.
After the memorisation, the radio goes directly to memory 1 of mem-ory bank FM3.Note:If t h e t r a f fi c i n f o r m a t i o n f u n c -Iftion has been activated (see R D S S Y S T E M ) , t h e s t a t i o n s offering this facility will be mem-orised as priority.
If it is unable to memorise any Ifnew stations, the system will retain the previously memo-rised stations.If t h e s y s t e m i s u n a b l e t o fi n d If 6 s t a t i o n s , t h e u n fi l l e d m e m o r y slots will remain free.
Page 118 of 216
120
IV
USING THE RDS (RADIO DATA SYSTEM) FUNCTION ON FM
The majority of FM radio stations use the RDS system. The radio in your vehicle has this system,.
The RDS system enables these stations to transmit non-audible data in addition to the broadcasting of their programmes. The data pro-vides access to various functions described in this chapter, such as: display of the station name, inter- m i t t e n t t r a f fi c i n f o r m a t i o n fl a s h e s or automatic scanning of stations. This enables you to continue lis-tening to your chosen radio station, regardless of the different frequen-cies it uses in the regions through which you are travelling.
SCANNING OF RDS STA-TIONS
Your radio keeps the best possible reception by continuously looks for any other frequencies on which the selected radio station is broadcast, automatically choosing the fre-quency offering the best reception (if the station broadcasts on more than one transmitter or frequency.
R D S S Y S T E M
ACTIVATION/DEACTIVATION OF THE RDS FUNCTIONS
The RDS functions can be accessed via the following two menus:Main menu (press button O ) .
AUDIO menu (press button L ) .
To activate/deactivate the functions RDS1. Press button O.2. Select the AUDIO icon using buttons J or M.3. C o n fi r m y o u r c h o i c e w i t h a press on button L.4. Select the sub-menu for the FM waveband, via but-tons J or M . C o n fi r m y o u r choice with a press on button L.5. Select scanning for RDS sta-tions, via buttons J or M.6. Validate your choice with a press on button L.7. Using control L, select/deselect to activate/deactivate the func-tion.8. Validate your choice by select-ing “OK” on the display.
Page 121 of 216
123
IV
MP3 CDS
The MP3 format (MPEG 1,2 & 2,5 A u d i o L a y e r 3 ) i s a n a u d i o c o m -pression standard that permits recording of 10 times as many m u s i c a l fi l e s o n o n e C D .
Y o u r r a d i o o n l y p l a y s b a c k fi l e s which have the extension “.mp3”. O t h e r t y p e s o f fi l e s ( . w a v , . m p g 4 , . o g g , m i d i . . . ) c a n n o t b e p l a y e d back.
When you insert an MP3 CD, the radio searches all the musical tracks. Playback may require some tens of seconds before starting.
Playback of the MP3 CD is opti-mised if the level of the cover is limited to 2.
Burning format
Some cut CDs cannot be read by your equipment (quality, speed of r e c o r d i n g , e t c . ) .
When you burn a CD-R or CD-RW, select the burning standard ISO 9660 level 1,2 or Joliet. Playback of other formats may not occur cor-rectly.
Use the Joliet standard to burn multi-session CDs.
On a given CD, always use the same burning standard.
To obtain the best possible acous-tic quality, select the lowest burn-ing speed.
It can handle transmission speeds of 8 to 320 kbits/s and playback of 22,05 to 44,1 kHz.
C D S O U R C E
MP3 CD PLAYER
Your Audio CD system may be MP3 compatible.
As you insert a CD recorded in MP3 format, playback starts of the fi r s t s o n g o f t h e fi r s t C D - c o v e r .
You can select a particular track by using buttons N or K and CD-cov-ers using buttons J or M.
TO SELECT A TRACK
To display the list of CD-covers, press on button G.
Use buttons J or M to select the CD-cover you wish to listen to.
To open a CD-cover, press L.
Use buttons N or K to select the track you wish to listen to.
Validate with a press on L.
MENU
This menu is for activation/deacti-vation of three options:Playback o f t h e fi r s t 7 s e c o n d s ( a p p r o x . ) o f e a c h t r a c k o f t h e CD.
Repetition of the current CD-cover.Random playback of CD-cover tracks by CD-cover.
This can be accessed in two ways:Either by pressing button EitherOand proceeding as for Scan-ning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing onbutton L. You can then access the Audio menu.Note: The CD changer (if there is one) is not MP3 compatible.
Page 123 of 216
125
IV
B L U E T O O T H®
Note: R e f e r t o t h e u s e r i n s t r u c t i o n s t o familiarise yourself with the features of twinning.The telephone detects the Blue-hetooth® tel tel s y s t e m o n y o u r v e h i c l e . “®C6 s y s t e m o n y o u r v e h i c l e . “ s y s t e m o n y o u r v e h i c l e . “ ” displays on your telephone.
You should then select “C6” on your telephone controls. Next you have to accept or decline this twinning.Note: If the 4 twinning memories are already being used, you must select a memory that is already attributed although the telephone twinned to this location will no longer be.Next the telephone asks you to enter xt a n i d e n t i fi c a t i o n c o d e : 1234.
Validate.Note: This entry may be demanded earlier in the twinning sequence.
The telephone is now twinned to your Bluetooth®telephone is telephone is system. For imme-®
diate access to the Bluetooth®imme-imme-
functions, it may be necessary to make a connection (see following page C o n fi g u r a t i o n : C o n n e c t i n g a twinned mobile telephone ) .
O n c e t h e t w i n n i n g i s fi n i s h e d , y o u will be able to connect your tele-phone via the “Main menu”.
Page 124 of 216
126
IV
MAIN MENU
Press on the Menu button O to access to Main menu, then select the “Telephone” icon using but-tons J ou M ) , t h e n v a l i d a t e t h e selection via button L.
You have access:To the Directory.
To C o n fi g u r a t i o n .To Communication Manage-ment.
You access your choices via (Jou M ) , t h e n y o u v a l i d a t e t h e m w i t h a press on L.
This main menu can also be accessed by pressing button Ethen button L.
FOLDER
This menu lets you open:The telephone Directory of the telephone that is connected.
The Calls List.
Telephone directory
The starting of a telephone call can be done independently of the telephone or of the audio system, thanks to the directory.
The directory is displayed. Select the number via J or M, then vali-date with a press on L.