Page 75 of 216
77
II
Proximity sensors are located in the front and rear bumpers of your vehi-cle.
If you are manœuvring either forwards or in reverse gear, at a speed less than approx. 10 km / h (6 mph ) , t h e y i n f o r m y o u o f t h e p r e s e n c e o f a n obstacle located within their zone of detection by means of: A sound signal emitted by the front or rear loudspeakers.A
Display of the outline of your vehicle with shading corresponding t o the area where an obstacle is detected.
As the vehicle approaches the obstacle, the sound signal tells you the posi-tion of the obstacle according to whether the sound is coming from the front LH or RH or the rear LH or RH loudspeakers.Note: The sound volume of your audio equipment reduces automatically when a signal is being emitted.
Page 76 of 216
78
II
1
ACTIVATION/DEACTIVATION
You can activate/deactivate the parking assistance by pressing button 1. When the parking assist-ance is inactive, the warning lamp on button 1 is lit up.
Activation/deactivation of the park-ing assistance is memorised when you stop the vehicle.
Remark: If you wish to tow a trailer, it is necessary to deactivate the parking assistance by pressing button 1. The warning lamp on the button lights up.
OPERATION
When you engage reverse gear, a s o u n d s i g n a l c o n fi r m s t o y o u that the system is active. The out-line of your vehicle appears on the screen. Any obstacles located to the rear or to the front of the vehi-cle can be detected.
Moving forwards at a speed less than around 10km / h (6mph ) , whether in neutral or in gear, the vehicle outline displays on the screen as soon as an obstacle is detected in front of the vehicle. Any obstacles located to the rear or to the front of the vehicle can be detected.
Remarks:The proximity sensors cannot detect objects that are immedi-ately under or over the bump-ers.
A thin object such as a spike, Aa bollard or similar, can only be detected at the start of the manœuvre but not when the vehicle arrives close up to it.In poor weather or in winter, you need to ensure that the sensors are not covered with mud or with ice or snow.
Page 85 of 216
87
III
2a2b1
3a3b4
765
1
A U T O M A T I C A I R C O N D I T I O N I N G
The system has a differentiated adjustment for the driver's side and passenger's side, in terms of temperature and a i r d i s t r i b u t i o n . T h e a i r fl o w i s c o m m o n t o b o t h s i d e s .
Symbols and messages relating to the automatic air conditioning controls will display on the multifunction screen.
2. TEMPERATURE ADJUSTMENT
To adjust the temperature, press on button 2a to modify the temperature on the passenger's side and on but-ton 2b to modify it on the driver's side.
An adjustment around 21 will give you the optimum comfort level. However, depending on your preferences anywhere between 18 and 24 is quite usual.
Operating the air conditioning system on “AUTO” guar-antees good ventilation inside the cabin.Note: There may be a discrepancy between the actual c a b i n t e m p e r a t u r e a n d t h e fi g u r e d i s p l a y e d .
This is the normal operating mode for the system. Depending on the temperature chosen, a press on this b u t t o n , c o n fi r m e d b y t h e l i g h t i n g o f t h e w a r n i n g l a m p , will automatically and simultaneously bring all the fol-lowing functions into play:Air fl o w .Air
Cabin temperature.
Air distribution.Air
Air inlet.Air
It is recommended to keep all the air vents open. Just by pressing any of the buttons, except for temperature 2a and 2b, you can change to manual mode. The warn-ing lamp goes out.
Page 86 of 216
88
III
A U T O M A T I C A I R C O N D I T I O N I N G
Remarks:When starting from cold, in order to prevent unwanted c o l d a i r , t h e a i r fl o w w i l l i n c r e a s e o n l y g r a d u a l l y t o i t s optimum level.
If you enter the vehicle after a fairly prolonged stop Ifand the temperature inside the vehicle is far from comfortable, it serves no purpose to modify the tem-perature that is displayed as an attempt to go imme-diately to the desired comfort level. The system automatically uses all of its power to compensate the temperature gap as quickly as possible.
Remarks:Water arising from the condensation in the air con-aterditioning drains out through a hole provided for this purpose ; a pool of water may thus form underneath the vehicle when stationary.
Whatever the time of year, even in cool weather the Whateverair conditioning is useful in removing humidity and misting.You are advised to have the air conditioning sys-tem checked on a regular basis. See “Maintenance Guide”.
If you are towing a heavy trailer and outside tem-Ifperatures are high, the air conditioning may be tem-porarily paused if the engine cooling requires this.
Page 87 of 216
89
III
3a3b
4
A U T O M A T I C A I R C O N D I T I O N I N G
3. ADJUSTING THE AIR DISTRIBUTION
Successive or continuous presses on buttons 3a and 3b w i l l d i r e c t t h e fl o w o f a i r t o t h e p a s s e n g e r ' s i d e o r t o the driver's side.
T h e s y m b o l ( a r r o w s ) c o r r e s p o n d i n g t o t h e o r i e n t a t i o n chosen is displayed on the multifunction screen:Windscreen and side windows.
Central, lateral and soft diffusion air conditioning v e n t s ( i f o p e n ) .
Passenger footwells.Passenger“AUTO” automatic distribution.
Page 89 of 216
91
III
A U T O M A T I C A I R C O N D I T I O N I N G
To activate/deactivate the air conditioning system
Press on the control “CLIM” to go into the “air condition-ing” mode. Then press button “OK” or on the control to bring up the “Air Conditioning menu” on the multifunc-tion screen.
This menu allows you:To deactivate the air conditioning: “Cut aircon (A/C OFF ) ” .Press button “OK”, or on the control, to validate the offer to activate or deactivate the air conditioning.
The symbol “A/C OFF” displays on the multifunction screen in the case of deactivation.
Note:Your temperature adjustment value may not be ourreached and you risk having the windows misted up.You can cancel deactivation of the air conditioning, ouby pressing the control 1 “AUTO “ “ ” .
Page 99 of 216
101
III
A
S U S P E N S I O N W I T H E L E C T R O N I C A L L Y
C O N T R O L L E D S P R I N G I N G A N D D A M P I N G
Active suspension with piloted d a m p i n g a n d fl e x i b i l i t y a u t o m a t i -cally and instantaneously adjusts the dampers to your driving style, as well as to the condition of the road surface, this to achieve the maximum comfort for you and your passengers, as well as improved roadholding.
This symbol displays on your instrument panel.
SIGNALLINGIn the standard situation, button A is not lit up by day, it only illuminates at night.In sport mode, after you press button A, the latter lights up in orange, day or night.
Sport mode is retained when you switch off the engine.
Page 100 of 216
102
III
G R O U N D C L E A R A N C E A D J U S T M E N T
Position changes may only be made when the engine is running.
The ground clearance is adjusted automatically. You can however modify the vehicle height in certain s p e c i fi c c a s e s .
To change the position
Press once on one of the adjust-ment controls. The change of posi-tion is indicated at the start of the adjustment by:A message orA
Temporary display of the initial position with the symbol for the position requested.Note: You are recommended to avoid any changing of position while you have your foot on the brake.
Viewing of the position of the vehicle
On completion of the adjustmentyou see either a message or an illustration of the position attained by the vehicle, with the appropriate symbol.
