Page 14 of 216
II
1717
AB
IN BRIEF
You can activate/deactivate the parking assistance by pressing button A. When the parking assist-ance is inactive, the warning lamp on button A is lit up.
PARKING ASSISTANCELANE DEPARTURE WARN-ING SYSTEM
This driving assistance device warns you when you unwittingly cross a lane marking (either a con-tinuous or a dotted line on the road s u r f a c e ) . I t i s d e s i g n e d f o r u s e o n motorways and dual carriageways, operating only above speeds of a p p r o x . 8 0 k m / h ( 5 0 m p h ) .
A press on button B activates the function, the warning lamp on the button lights up.
HEAD-UP DISPLAY
The Head-up display projects essential driving data into the d r i v e r ' s fi e l d o f v i s i o n . T h i s e n a b l e s the driver never to take his eyes off the road.
The controls for the Head-up dis-play are located beneath the air vent on the driver's side.
807755
D R I V I N G
Page 18 of 216
II
2121
D
C
E
B
A
IN BRIEF
FRONT PASSENGER'S AIRBAG DEACTIVATIONCHILD SAFETYTHE ISOFIX FASTENING SYSTEM
In order to be able to use a rear-facing child seat in the front pas-senger's seat position, it is impera-tive to deactivate the passenger's airbag.
For that:With the ignition switched off, insert the key into the switch A.Turn the key to the “OFF” posi-tion, the passenger's airbag is deactivated.
The front passenger's airbag deac-tivation warning lamp, in the instru-ment panel, lights up when you switch on the ignition.
Page 28 of 216

31
II
23
1
S E A T B E L T S W A R N I N G L A M P
OPERATION
The driver's and the front and rear passengers' seats have sensors that detect non-fastening/unfas-tening of the seat belts.
The fastened/non-fastened status of the seat belts for each type of seat is indicated by the illumination o r fl a s h i n g o f t h e w a r n i n g l a m p s 1, 2 and 3.
FUNCTIONING OF THE SYSTEM OF DETECTION
Driver's and front passenger's seats
When you switch on the ignition:If the driver's seat belt is not fastened, the warning lamp If1 illuminates in the instrument panel.If the passenger's seat belt is not fastened, the warning lamp If3 lights up.
A b o v e 2 0 k m / h ( 1 2 m p h ) , i f t h e s e a t b e l t i s u n f a s t e n e d t h e w a r n i n g l a m p fl a s h e s , a c c o m p a n i e d b y a m e s s a g e a n d a s o u n d s i g n a l f o r a r o u n d 2 m i n -utes. After that, warning lamps 1 and/or 3 remain on.
Rear passengers' seats
When you switch on the ignition, warning lamp 2 lights up to make the driver and any passengers aware.
Once the doors are closed and the engine started, a message tells you the fastening status of the rear belts for 30 seconds.
After this time, if one or more of the rear belts are not fastened:The warning lamp 2 comes on if your speed is less than approx. 20 km/h ( 1 2 m p h ) .The warning lamp 2 fl a s h e s , a c c o m p a n i e d b y a m e s s a g e a n d a s o u n d signal, for about two minutes if your speed is greater than around 20 km / h ( 1 2 m p h ) .Note:The detection of non-fastening of rear seat belts is deactivated when you switch off the ignition or if one of the vehicle's doors is opened.
A child seat installed on the front passenger's seat may not be detected.
Page 46 of 216