2006 MITSUBISHI COLT door lock

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-15
KEYLESS ENTRY ROOM LAMP ANSWERBACK FUNCTION (INITIAL SETTING: LOCK
FLASH ONCE, UNLOCK ILLUMI NATES FOR 15 SECONDS)
AC314090
OFFON
ON
OFF
Illuminate
Extinguish
Lock relay output
OFF
ONDoor unlock switch output
OFFON
Door lock switch output Unlock relay output
Hazard lamp
Illuminate
Extinguish
Interior lamp
AB
ab
c
a: 0.6 second
b: 1.2 seconds
c: 15 seconds
When the
ET ACS-ECU receives t he lock signa l from
the keyless entry transmit
t er , all doo rs (includin g t a il
-
gate) is locked and the interior lamp flashe s once in
syn
chron i za tion with the haza r d lamp op eratio n.
When th
e ET ACS-ECU receives the u n lock sign al,
all d
oors (including t a ilgate) is u n locked . The interior
lamp fades in, keep
s on, and fades out in 15 seconds
af
te r the d oor unlock rela y is ope rated. (15 se cond s
including fad
i ng p e riod)
NOTE: The answerb ack blink t i me can be adjuste d
by th
e customize function. (Re f er to
P.54B-25).

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-23
INTERIOR LAMP
INTERIOR LAMP DIMMER CONTROL FUNCTION (THE INITIAL CONDITION: 15 SEC-
ONDS)
AC31030515 seconds
(All closed) OFF
(Any one open) ON ON
OFF
Key removed ACC
100 % 0 %
60 %
Door switch
(Unlock) OFF(Lock) ON
Driver's door
lock actuator switch
(lock switch)
Interior lamp brightness
Ignition switch
15 secondsAC
Wh
en t h e int e r i or lamp switch is o n th e do or p o sitio n ,
ET
ACS-ECU controls the inte rior lamp lamp s as fol
-
lows.
1.Whe n the ignit i on switch is OFF:
By opening a n y d oor or t a ilgate , the lamp turns ON
(100 %), and dims (60 % ) when t he doo r or t a il
-
gate is clo s ed, then a nd turn s of f af ter 15 sec-
onds.
However , whe n the ignit i on switch is turned ON or
the door lock is operat ed, the lamp s turn of f a t
tha t time.
2.Whe n the ignit i on switch is ON:
By opening a n y d oor or t a ilgate , the lamp (100%)
turn s ON a nd OFF when t he doo r or t a il gate is
cl ose d .
3.Whe n all doors and the t a ilgate are close d , and
the ignition key is remo ved:
By removing the ignition key with a ll d oors a nd the
t a ilgate closed, th e lamp tu rns ON 60%, a nd
turn s of f af ter 15 seconds.
By inserting the ignition key again or op erating the
doo r lock wit h the lamp lit, the lamp s turns of f.
NOTE: For t he ve hicles with th e keyless e n try sys-
tem, the delaye d lamp-off time and t he ope ration
time
s of the keyless entry inte rior lamp answer b a ck
can b
e ch anged by th e cu stomise function (Re f er to
P.54B-25).

CUSTOMISE FUNCTION
SMART WIRING SYSTEM (SWS)54B-25
CUSTOMISE FUNCTION
M2541006000243
Using M.U.T.-III adjusts the following function. The
programmed information is held even when the bat
-
tery is disconnected.
•Vehicle speed-dependent wiper function
With the windshield wiper switch in the intermittent
position, the intermittent duration changes
depending on the intermittent adjusting knob
position and the vehicle speed.
•The selector "P" position-linked central door
unlocking function
When the selector lever is shifted to the "P" position,
all the doors unlock.
•Turn-signal lamp operation sound function
Synchronized with the hazard lamp and the turn sig-
nal lamp, the buzzer sounds.
•Dimmer interior lamp control duration
When the door is closed with the ignition switch
LOCK (OFF), the interior lamp is turned OFF
automatically in the specified time.
•Timer lock time after executing the keyless entry
unlock
If any door including a tailgate is not opened after
being unlocked with the keyless transmitter,
doors are locked automatically within the speci
-
fied time.
•Door-ajar warning function
Driving with any door, including a tailgate, not prop-
erly closed sounds the buzzer to let the driver
know the door-ajar state.
•Rear wiper intermittent duration
When the rear wiper switch is turned ON, the rear
wiper operates in the intermittent action. When
the rear wiper switch is turned from OFF to ON
two cycles, the rear wiper makes continuous
operation regardless of the intermittent operation
duration setting.
•Wiper linked with washer function
When this function is active, the windshield wiper
operates if the washer switch is turned ON.
•Hazard answer back function of the keyless entry
system
When lock/unlock is operated with the keyless entry
transmitter, the horn sounds so that the driver can
recognize the lock/unlock status of the vehicle
even if the driver is away from it.
•Initialising all functions (Returning to the initial
condition)
All adjusting functions are returned to the settings at
the time of factory shipment.
Item
No.Items shown
on M.U.T.-III
screenItemAdjustment items
shown on M.U.T.-III
screenAdjusting contents
4SPEED SEN
WIPVehicle
speed-dependent
wiper functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
9KEYLESS(HA
ZD)Hazard answer
back function of
the keyless entry
systemLOCK/UNLOCKWith function for lock/unlock (the initial
condition)
LOCKEDWith function only for lock
UNLOCKEDWithout function only for unlock
W/O FUNCTIONWithout function
14P UNLOCK
ACT.Door unlock
function linked
with "P" position
shift for centre
door lock systemW.FUNCTIONWith function
W/O FUNCTIONWithout function (the initial condition)
15T/SIG.BUZZE
RTurn-signal lamp
operation sound
functionW.FUNCTIONWith function
W/O FUNCTIONWithout function (the initial condition)

CUSTOMISE FUNCTION
SMART WIRING SYSTEM (SWS)54B-26
16RM LMP TN
OFFDimmer interior
lamp control
duration60s60 seconds
30s30 seconds
15s15 seconds (the initial condition)
7.5s7.5 seconds
W/O FUNCTION0 second (no delay action)
24KEYLES
LOCK TTimer lock time
after executing the
keyless entry
unlock30s30 seconds (the initial condition)
60s1 minute
120s2 minutes
180s3 minutes
26DOOR WARN
BUZDoor-ajar warning
functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
28R.INT WIPER
TRear wiper
intermittent
duration8s8 seconds: Without continuous
operation (Initial setting)
4s(W SUCSSON)4 seconds: With continuous operation
8s(W SUCSSON)8 seconds: With continuous operation
16s(W SUCSSON)16 seconds: With continuous operation
CONTIN ACTIONContinuous operation (without the
intermittence)
37WIP SYCR
WASHWiper linked with
washer functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
38KEYLES
HAZARDCustomise
function for
changing the
number of the
keyless hazard
warning lamp
answerback
flashingLOCK1,UNLOCK2LOCK: Flash once, UNLOCK: Flash
twice (Initial setting)
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
LOCK2,UNLOCK1LOCK: Flash twice, UNLOCK: Flash
once
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
39TURN-SIGNA
LTurn signal lamp
operation
condition
adjustment
functionIG-ONTurn signal lamp can be operated when
the ignition switch is turned ON (Initial
setting).
IG-ACCTurn signal lamp can be operated when
the ignition switch 1 is in ACC or ON
position.
Item
No.Items shown
on M.U.T.-III
screenItem Adjustment items
shown on M.U.T.-III
screenAdjusting contents