2006 LEXUS LS430 display

217
3-5. Other interior features
3
Interior features
■Operating conditions
The ignition switch must be in the ON position.
■Display
●Ranges: -22°F (-30°C) to -122°F (50°C).
●If it reads “- - - ” or blanks, take vehicle to your Lexus dealer.

238
3-5. Other interior features
Compass (vehicles without navigation system)
The compass on the multi-information display indicates the direction in which
the vehicle is heading.
■ Operation
Turning the compass display on or off.
Push button for 1 to 2 seconds
repeatedly until the compass dis-
plays.
■ Displays and directions
DisplaysDirections
NNorth
NENortheast
EEast
SESoutheast
SSouth
SWSouthwest
WWe s t
NWNorthwest

239
3-5. Other interior features
3
Interior features
Calibrating the compass
The direction display deviates from
the true direction determined by
the earth’s magnetic field. The
amount of deviation varies accord-
ing to the geographic position of
the v
ehicle.
If you cross over a map boundary
as shown in illustration, the com -
pass will deviate.
■ Calibration
Stop the vehicle where it is safe to drive in a circle.
Push and hold the on the
steering pad for at least 6 seconds
until “DRIVE IN CIR

CLES”
appears on the display.

240
3-5. Other interior features
Drive the vehicle at 5 mph (8 km/
h) or lower in a circle until a direc-
tion is displayed.
If there is not enough space to
drive in a circle, drive around the
block until the direction is dis -
played.
■Factors affecting compass accuracy
The compass may not show the correct direction in the following conditions:
• The vehicle is stopped immediat
ely after turning.
• The vehicle is on an inclined surface.
• The vehicle is in a place where the earth’s magnetic field is subject to interfer -
ence by artificial magnetic fields 
(underground parking, under a steel tower, between buildings, roof parking,
ne
ar a crossing, near a large vehicle, etc.).
• The vehicle is magnetized. 
(There is a magnet or a metal object near the inside rear view mirror.)
• The battery has been disconnected.
• A door is open.
CAUTION
■While the vehicle is moving
Do not adjust the display. Be sure to adjust the display only when the vehicle is
stopped.
■When doing the circling calibration
Be sure to secure a wide space, and watch out for people and vehicles in the neigh -
bood. Do not violate any local traffic rule s
while performing circling calibration.

265
4-3. Do-it-yourself maintenance
4
Maintenance and care
■ How to read oil container labels
The ILSAC (International Lubricant Standardization and approval Commit -
tee) Certification mark is are added to some oil
containers to help you select
the oil you should use.
ILSAC Certification Mark
■Resetting the engine oil maintenance information data (U.S.A. only)
After replacing the engine oil, be sure to
reset the maintenance data. Otherwise,
the engine oil maintenance information may not function correctly. ( P.334 )
Push the "TRIP" button to change t
he trip meter display to blank.
Turn the ignition switch off.
Turn the ignition switch to "ON" while pushing
the trip meter "RESET"
button.
Keep pushing the trip meter "RESET " button for lon
ger than 5 seconds.
"Mileage Reset" appears on
the display, the master warning light comes
on, and a warning tone sounds.

279
4-3. Do-it-yourself maintenance
4
Maintenance and care
Initializing the tire pressure warning system
Tire pressure warning system must be initialized after tires or wheels have
been replaced or rotated, or after adjusting tire pressure.
Message
Reset switch
Park the vehicle with the parking br
ake applied and turn the igni-
tion switch to “LOCK”.
Adjust the pressure of all the tir
es to the specified level.
( P.283 )
Turn the ignition switch on.*
Push and hold the reset switch until “P
ressure Initial” appears in
the multi-information display.**
Drive your vehicle for more than one hour or at speeds of 1
9 mph
(30 km/h) or over.
If you make a mistake in the middle of initialization, per
form the operation
again from the beginning.
*: If “Low Tire” appears in the multi- information display
, push the “RESET”
switch for a few seconds and make sure the warning message disap-
pears.
**:If “Pressure Initial” does not appear when the r
eset switch is held down,
the system may be malfunctioning. Ha ve your vehicle checked by your
Lexus dealer as soon as possible
1
2

283
4-3. Do-it-yourself maintenance
4
Maintenance and care
Tire inflation pressure
■Tire inflation pressure
The recommended cold tire inflation pressure and tire size is displayed on the
tire and loading information label.
Recommended cold tire inflation pressure
Ti r e s i z eInflation pressure psi (kPa, kgf/cm2 or bar)
P225/55R17 95HFront32 (220, 2.2)
Rear32 (220, 2.2)
245/45R18 96WFront33 (230, 2.3)
Rear33 (230, 2.3)
P245/45R18 96VFront33 (230, 2.3)
Rear33 (230, 2.3)

304
4-3. Do-it-yourself maintenance
■Fuse box in the driver’s side kick panel
FuseAmpereCircuit
TA I L7. 5Tail lights, parking lights, Side marker lights
H-LP CLN30Headlight cleaner
EFI NO.125Multiport fuel injection system/sequential
multiport fuel injection system
HORN10Horns
ETCS10Multiport fuel injection system/sequential
multiport fuel injection system
H-LP HI20Headlights (high beam)
FuseAmpereCircuit
TI & TE20Tilt and telescopic steering
PA N E L7. 5
Lexus park assist system, Rear seat heater,
Rear climate control seat, Multi-informa -
tion display, Audio system, Cigarette
li
ghter, Instrument panel light, Coin box
light, Rear mirror light, Glove box light,
Power rear seat, Electronically modulated
air suspension system, Turn signal lights,
Clock, Shift lock system, Vehicle stability
control system, Sunshade, Power rear view
mirror control system, Console box light,
Fuel opener system, Adaptive Front Light -
ing System (AFS)
D P/SEAT30Power seat system
GAUGE7. 5Gauges and meters, Lexus park assist sys -
tem, Shift lock system
12
13
14
15
16
17
1
2
3
4