2006 FORD S-MAX ESP

Front D\bsc Br\fke - Br\fke P\fdsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Remov\fl \fnd Inst\fll\ft\bon
Spec\b\fl Tool(s)
M\ft

er\b\fls
Remov\fl
N O

TE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst
\bll\btion\fdet\bils.\f
Vehicles\fwith\f2.5L\fengine\for\f2.2L\fdiesel\fengine\f
Al

l\fexcept\fvehicles\fwith\f2.5L\fengine\for\f2.2L\fdiesel\f
engine\f
206-005\f
Retr\bctor,\fBr\bke\fC\bliper\fPiston
\f
NameSpec\bf\bcat\bo\f
Br\bke\fFluid\f-\fSuper\fDOT4WSS-M6C57-A2
1. Refer\fto:\fBr\bke\fSystem\fHe\blth\f\bnd\fS\bfety\f
Pre

c\butions \f(100-00\fGener\bl\fInform\btion,\f
Des

cription\f\bnd\fOper\btion).\f
2. Refer\fto:\f Wheel\f\bnd\fTire\f(204-04\fWheels\f\bnd\f
Tir

es,\fRemov\bl\f\bnd\fInst\bll\btion).\f
3. \f
4. WARNING:\fThe\fbr\bke\fc\bliper\fhousing\f
T o

rx\fbolts\fmust\fnot\fbe\fremoved.\f
CAUTION:\fM\bke\fsure\fth\bt\fno\flo\bd\fis\f
pl\bced\fon\fthe\fbr\bke\fhose.\f\f Torque:\b 28\fNm
\f
5. \f
\f
\f\f
\f\f
\f\f
Стр. 1 из 3
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543365&gui...procarmanuals.com
http://vnx.su

Rear Di\bc Brake \f Brake Pad\bS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and In\btallation
Special Tool(\b)
Mat

erial\b
Removal
N O

TE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst
\bll\btion\fdet\bils.\f
206-012\f
Retr\bctor,\fRe\br\fBr\bke\fC\bliper\fPiston
\f
NameSpec\bf\bcat\bo\f
Br\bke\fFluid\f-\fSuper\fDOT4WSS-M6C57-A2
1. Refer\fto:\fBr\bke\fSystem\fHe\blth\f\bnd\fS\bfety\f
Pre

c\butions \f(100-00\fGener\bl\fInform\btion,\f
Des

cription\f\bnd\fOper\btion).\f
2. Refer\fto:\f Wheel\f\bnd\fTire\f(204-04\fWheels\f\bnd\f
Tir

es,\fRemov\bl\f\bnd\fInst\bll\btion).\f
3. \f
4. WARNING:\fM\bke\fsure\fth\bt\fno\flo\bd\fis\f
p l

\bced\fon\fthe\fbr\bke\fhose.\f
Torque:\b 35\fNm
\f
5.NOTE:\fNote\fthe\fposition\fof\fe\bch\fcomponent\f
be
fore\fremov\bl.\f
1. Br\bke\fp\bd\floc\bting\fspring\f(rubber\fco\bted).
\f
2. Br\bke\fp\bd\floc\bting\fspring.\f
6. Spec\fal\bTool(s):\b 206-012\f
\f
\f\f
\f\f
\f\f
Стр. 1 из 2
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543367&gui...procarmanuals.com
http://vnx.su

Rear Di\bc Brake \f Brake Pad\b—Vehicle\b
With: Electronic Parking Brake (EPB)S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and In\btallation
Material\b
Removal
CA
UTION:\fRefer\fto:\f Br\bke\fSystem\fHe\blth\f\bnd\fS\bfety\fPrec\butions \f(100-00\fGener\bl\f
Inf

orm\btion,\fDescription\f\bnd\fOper\btion).\f
NOTE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst\bll\btion\fdet\bils.\f
In\btallation
NameSpec\bf\bcat\bo\f
Br\bke\fFluid\f-\fSuper\fDOT4WSS-M6C57-A2
1. Refer\fto:\f Wheel\f\bnd\fTire\f(204-04\fWheels\f\bnd\f
Tir
es,\fRemov\bl\f\bnd\fInst\bll\btion).\f
2. Activ\bte\fthe\felectronic\fp\brking\fbr\bke\fc\bliper\f \bctu\btor\fservice\fmode.\f
Refer\fto:\f Electronic\fP\brking\fBr\bke\f(EPB)\fRele\bse\f
Usi

ng\fthe\fVehicle\fSystems \f(206-05\fP\brking\f
Br\b

ke\f\bnd\fActu\btion,\fGener\bl\fProcedures).\f
3. \f
4. WARNING:\fM\bke\fsure\fth\bt\fno\flo\bd\fis\f
p l

\bced\fon\fthe\fbr\bke\fhose.\f
Torque:\b 35\fNm
\f
5.NOTE:\fNote\fthe\fposition\fof\fe\bch\fcomponent\f
be
fore\fremov\bl.\f
1. CAUTIONS:\f
\f\f
\f\f
\f\f
Стр. 1 из
2
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G831737&gui...procarmanuals.com
http://vnx.su

Rear Di\bc Brake \f Brake CaliperS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and In\btallation
Material\b
Gen

eral Equipment
Removal CA
UTION:\fRefer\fto:\f Br\bke\fSystem\fHe\blth\f\bnd\fS\bfety\fPrec\butions \f(100-00\fGener\bl\f
In f

orm\btion,\fDescription\f\bnd\fOper\btion).\f
NOTE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst\bll\btion\fdet\bils.\f
NameSpec\bf\bcat\bo\f
Br\bke\fFluid\f-\fSuper\fDOT4WSS-M6C57-A2
Hose\fcl\bmp(s)
1. Remove\fthe\fwheel\f\bnd\ftire.\f\f
Refer\fto:\f Wheel\f\bnd\fTire\f(204-04\fWheels\f\bnd\f
Tir

es,\fRemov\bl\f\bnd\fInst\bll\btion).\f
2. \f
3. \f\f 1.General \bqui\fment: Hose\fcl\bmp(s)\f
2. To

rque: 18\fNm
\f
3. Torque: 35\fNm
\f
4. CAUTION:\fM\bke\fsure\fth\bt\f\bll\fopenings\f
\br

e\fse\bled.\f
5. NOTE:\fNote\fthe\fposition\fof\fthe\fbr\bke\fp\bds\fto\f
\bi
d\finst\bll\btion.\f
\f\f
\f\f
\f\f
Стр. 1 из
2
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543368&gui...procarmanuals.com
http://vnx.su

Power Br\bke Ac\fu\b\fion - Br\bke Boos\fer—2.0L
Dur\b\forq-TDCi (100kW/136PS) - DW-C/2.0L
Dur\b\forq-TDCi (85kW/115PS) - DW/2.2L
Dur\b\forq-TDCi (129kW/175PS) - DW/2.0L
Dur\b\forq-TDCi (103kW/140PS) - DW, RHD
FWD
S-MAX/G\bl\bxy\f2006.5\f(02/2006
Remov\bl \bnd Ins\f\bll\b\fion
M\b\feri\bls
Remov\bl
NO

TE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst
\bll\btion\fdet\bils.\f
NameSpec\bf\bcat\bo\f
Compressor\fOil\f-\fAir\fConditioningWSH-M1C231-B\f/\f6U7J-M1C231-AA
1. CAUTION:\fM\bke\fsure\fth\bt\fthe\fbr\bke\fped\bl\f
r e

m\bins\fin\fthe\frest\fposition.\f
NOTE:\fThe\fbr\bke\fped\bl\f\bctu\bting\frod\fpin\fwill\fbe\f
d\bm\bged\fduring\fremov\bl.\f Torque:\b 24\fNm
\f
2. Refer\fto:\f Accessory\fDrive\fBelt \f(303-05E\fAccessory\fDrive\f
-\f2.0L\fDur\btorq-TDCi\f(85kW/115PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(100kW/136PS)\f-\fDW/2.0L\fDur\btorq
-
(103kW/140PS)\f-\fDW,\fEmission\fRequirements:\fSt\bge\fIV,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
3. Refer\fto:\f Air\fConditioning\f(A/C)\fSystem\fRecovery,\f
Ev\b

cu\btion\f\bnd\fCh\brging\f(412-00\fClim\bte\fControl\f
Sys

tem\f-
\fGener\bl\fInform\btion,\fGener\bl\fProcedures).
4. \f
5. Refer\fto:\f Br\bke\fM\bster\fCylinder\f-\fRHD\fFWD \f(206-
06\f
Hydr\bulic\fBr\bke\fActu\btion,\fRemov\bl\f\bnd\fInst\bll\btion).
6. \f
7. \f
\f\f
\f\f
\f\f
Стр. 1 из
5
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1033438&gu...procarmanuals.com
http://vnx.su

Installati\bn Re\f\bval
Pneumat\bc vacuum \fun
Anti-L\bck C\bntr\bl - Anti-L\bck Brake
Syste\f (ABS) M\bduleS-MAX/Galaxy 2006.5 (02/2006-) Pr\bnt
Re\f\bval and Installati\bn
Materials
Gen

eral Equip\fent
NameSpec\bf\bcat\bo\f
Spo\bler Adhes\bve K\bt 2 ComponentWSK-M5B401-A1 / 2U7J-M2G376-AA
Ford approved d\ba\fnost\bc tool 1. Remove the hydraul\bc control un\bt (HCU).
Refer to: Hydraul\bc Control Un\bt (HCU) (206-09A
Ant

\b-Lock Control, Removal and Installat\bon).
2.
3. Clean the HCU contact surface.
Material\b Spo\bler Adhes\bve K\bt 2 Component (WSK-
M5B

401-A1 / 2U7J-M2G376-AA)
4. R

emove all traces of the cleaner and fore\b\fn
mater\bal.
General \fquipment\b Pneumat\bc vacuum \fun
1. WARNING: Make sure that the module \bs
co

rrectly located on the hydraul\bc control un\bt
(HCU).
CAUTIONS:
If acc\bdentally dropped or knocked \bnstall
a new module.
Take extra care not to dama\fe the seal.
NOTE: Make sure that the seal \bs correctly
located. Torque\b
0.

5 Nm

1.0 Nm

1.5 Nm

2.0 Nm

2.5 Nm

Sta\fe 1:
Sta\fe 2:
Sta\fe 3:
Sta\fe 4:
Sta\fe 5:


Стр. 1 из 2
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G549079&gui...procarmanuals.com
http://vnx.su

Anti-Lo\bk Cont\fol - Stability Assist - Anti-
Lo\bk Cont\fol - Stability AssistS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Des\b\fiption and Ope\fation
\f\f
Des\b\fiption
Y\bw\fr\bte\fsensor\f\bnd\f\bccelerometer\f
Steering\fwheel\frot\btion\fsensor\f
Hydr\bulic\fcontrol\funit\f(HCU)\f\bnd\fst\bbility\f\bssist\fmodule\f\bssembly\f
The\fst\bbility\f\bssist\fmodule\f\bdds\f\b\ffurther\ffunction\fknown\f\bs\felectronic\fst\bbility\fprogr\bm\f
( E

SP)\fto\fthe\f\bnti-lock\fbr\bke\fsystem\f(ABS)\f\bnd\fincludes\f\b\ftr\bction\fcontrol\ffunction.\fWhere\bs\f
the\fABS\fprevented\fwheel\flock\fup\fduring\fbr\bking,\fthe\ftr\bction\fcontrol\ffunction\fcontrols\f
wheel\fslip\fduring\f\bcceler\btion\f(longitudin\bl\fdyn\bmics)\f\bnd\fthe\fESP\fst\bbilizes\fthe\fvehicle\f
\bbout\fits\fvertic\bl\f\bxis.\f
Sensors\fme\bsure\fthe\fposition\fof\fthe\fsteering\fwheel,\fthe\fpressure\fin\fthe\fbr\bke\fm\bster\f
cylinder,\fthe\fy\bw\fvelocity\f(y\bw\fr\bte)\f\bnd\fthe\f\bcceler\btion\ftr\bnsverse\fto\fthe\fvehicle\f(l\bter\bl\f
\bcceler\btion).\fThis\fm\bkes\fit\fpossible\fto\fcomp\bre\fthe\fdriver's\fintention\fwith\fthe\fmoment\bry\f
vehicle\fbeh\bviour\fso\fth\bt\fin\fthe\fevent\fof\fthe\fvehicle\fbecoming\funst\bble,\fESP\fc\bn\finiti\bte\fthe\f
\bppropri\bte\fcorrective\f\bction.\f
The\fESP\frecognizes\fcritic\bl\fdriving\fconditions,\fsuch\f\bs\fp\bnic\fre\bctions\fin\fd\bngerous\f
situ\btions,\f\bnd\fst\bbilizes\fthe\fvehicle,\fwithin\fthe\fphysic\bl\flimits,\fby\findividu\blly\fbr\bking\fe\bch\f
wheel\f\bnd\fgiving\fengine\fcontrol\fintervention\fwithout\fneed\ffor\fthe\fdriver\fto\f\bctu\bte\fthe\f
br\bke\for\fthe\f\bcceler\btor\fped\bl.\f
St\bbility\f\bssist\fcomponents\f
The\fESP\fuses\fthe\fs\bme\fcomponents\f\bs\fthe\fABS\fprogr\bm\fwith\fthe\f\bddition\fof\fthe\ffollowing:\f
*\fSt\bbility\f\bssist\fmodule:\fThis\fis\f\btt\bched\fto\fthe\fHCU\f\bnd\fis\ffitted\finste\bd\fof\fthe\fABS\f
module.\fThe\fst\bbility\f\bssist\fmodule\fc\brries\fout\fthe\fs\bme\ffunction\f\bs\fthe\fABS\fmodule.\f
*\fY\bw\fr\bte\fsensor\f\bnd\f\bccelerometer:\fThis\fsensor\fcluster\fcombines\fthe\fy\bw\fr\bte\f\bnd\fthe\f
l\bter\bl\f\bcceler\btion\fsensors\fin\f\b\fsingle\fcomponent.\fThe\fsensor\fis\f\btt\bched\fthe\ffloor\f
crossmember.\f
*\fSteering\fwheel\frot\btion\fsensor:\fThis\fsensor\fme\bsures\fthe\frot\btion\fof\fthe\fsteering\fwheel.\f Item
1
2
3
\f
Pa\ft Numbe\f -
-
-
Стр. 1 из 2
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506396&gui...procarmanuals.com
http://vnx.su

Anti-Lo\bk Cont\fol - Stability Assist -
Stability Assist ModuleS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Mate\fials
Gen

e\fal Equipment
Removal
I n

stallation
NameSpec\bf\bcat\bo\f
Spoiler\fAdhesive\fKit\f2\fComponentWSK-M5B401-A1\f/\f2U7J-M2G376-AA
Pneum\btic\fv\bcuum\fgun
Worldwide\fDi\bgnostic\fSystem\f(WDS) 1. Remove\fthe\fhydr\bulic\fcontrol\funit\f(HCU).\f\fRefer\fto:\f Hydr\bulic\fControl\fUnit\f(HCU) \f(206-09A\f
An t

i-Lock\fControl,\fRemov\bl\f\bnd\fInst\bll\btion).\f
2. \f
3. Cle\bn\fthe\fHCU\fcont\bct\fsurf\bce.\f
Material\b Spoiler\fAdhesive\fKit\f2\fComponent\f
(WS

K-M5B401-A1\f/\f2U7J-M2G376-AA) \f
4. R

emove\f\bll\ftr\bces\fof\fthe\fcle\bner\f\bnd\fforeign\f
m\bteri\bl.\f\f
General \fquipment\b Pneum\btic\fv\bcuum\fgun\f
1. WARNINGS:\f
M\b

ke\fsure\fth\bt\fthe\fmodule\fis\fcorrectly\f
loc\bted\fon\fthe\fhydr\bulic\fcontrol\funit\f(HCU).\f
A\fnew\fse\bl\fis\frequired\f\bg\bin\fonce\fthe\f
se\bl\fh\bs\ftouched\fthe\fm\bting\ff\bces\f\bnd\fthe\f
component\fis\fthen\fremoved\f\bnd\finst\blled\f
\bg\bin.\f
CAUTIONS:\f
If\f\bccident\blly\fdropped\for\fknocked\finst\bll\f
\b\fnew\fmodule.\f
T\bke\fextr\b\fc\bre\fnot\fto\fd\bm\bge\fthe\fse\bl.\f
NOTE:\fM\bke\fsure\fth\bt\fthe\fse\bl\fis\fcorrectly\f
loc\bted.\f
Torque\b \f
\f\f
\f\f
Стр. 1 из 2
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G551564&gui...procarmanuals.com
http://vnx.su