Page 185 of 311

µ»¼µ
To redial
the last telephone number you
called:
OnStar will respond with ‘‘Ready.’’
Say ‘‘Redial.’’
OnStar will respond with
‘‘Redialing,’’ then place the
telephone call.
By giving the system a security code
that you make up, you can lock out
the Personal Calling and Virtual
Advisor capabilities of the system so
unauthorized people cannot make
telephone calls. To turn security on
or of f : Press the CALL ANSWER/CALL
END button.
Press the white phone button.
OnStar will respond with ‘‘OnStar
ready.’’
Say ‘‘Security.’’
OnStar will respond with ‘‘First
digit of security code, please.’’
Say the f irst digit of the code. OnStar will repeat that digit.
Say the second digit of the code.
OnStar will repeat that digit.
Say the third digit of the code.
OnStar will repeat that digit.
Say the f ourth digit of the code.
OnStar will respond with ‘‘Security
is ON/OFF.’’
If you f orget the security code
entered, or someone else enters a
security code unknown to you, you
must contact an OnStar advisor to
reset the code. Press the OnStar
button, or call (888) 4-ONSTAR.
You must prepurchase units
(minutes) of cellular air time. The
OnStar system tracks how many
units you have remaining.
To f ind out how many units you have
remaining: Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Units.’’ OnStar will respond with ‘‘Verif y
or add.’’
Say ‘‘Verif y.’’
OnStar will respond with ‘‘You
have number units remaining.’’
To purchase more
units of cellular air time: Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘OnStar
ready.’’
Say ‘‘Units.’’
OnStar will respond with ‘‘Verif y
or add.’’
Say ‘‘Add.’’
OnStar will connect you to an
automated system to handle your
purchase.
It is also possible to press the
Onstar button and talk to an
advisor to purchase more air time.
You can also call OnStar at
(888) 4-ONSTAR, or get inf ormation
about your account at the OnStar
web site, www.onstar.com.
Redialing a Number
Security Code
K eeping T rack of UnitsA dding Units
OnStar
184
Page 186 of 311

If you do not have Internet access, a
def ault prof ile can be set up f or you.
To use the Virtual Advisor f rom your
vehicle:You make up and provide your
Personal Identification Number
(PIN) when you establish your
account with OnStar. You should
write down your PIN, and keep it
with you at all times.
You can change your PIN at any time.
Contact the OnStar advisor by
pressing the OnStar button, or by
calling (888) 4-ONSTAR.
If you f orget your PIN, contact the
OnStar advisor. For security reasons,
your PIN will be mailed to you.
When you subscribe to Personal
Calling, you can also enjoy the
benef its of Virtual Advisor. This
feature lets you hear information in
your vehicle about weather, sports,
news, and stocks.
Although Virtual Advisor can
provide inf ormation on many
subjects, you can set up a
customized prof ile with OnStar that
makes it easier to get inf ormation
about areas that are of specific
interest to you. To do this, you must
go to the OnStar web site,
www.onstar.com. This is a secure
site; you will need your account
number and PIN to access your
account inf ormation and to design
your customized prof ile. Press the CALL ANSWER/CALL
END button.
Say ‘‘Virtual Advisor.’’ OnStar will respond with ‘‘OnStar
ready.’’
The system will connect you to the
Virtual Advisor. The Virtual Advisor
will prompt you f or the inf ormation
you desire.
If you would like to hear a list of
voice commands that are available,
say ‘‘What are my choices.’’ OnStar
is continually upgrading the system,
so new commands may become
available.
OnStar Virtual A dvisor
Personal Identif ication Number
OnStar
Features
185
Page 187 of 311

OnStar uses the global positioning
system (GPS) to locate your vehicle
f or f unctions such as route guidance
and roadside assistance. GPS is
af f ected by structures that can
obstruct the signal, such as tunnels,
parking structures, and tall buildings.
It may not be possible f or OnStar to
pinpoint your location if you are in or
near such structures.
OnStar uses cellular technology to
communicate with your vehicle.
Cellular coverage varies by location,
which may af f ect the ability to
establish a connection, or the quality
of the connection.When you turn of f your vehicle’s
ignition, the OnStar system goes into
low-power mode. Af ter 48 hours, it
switches to sleep mode to conserve
your vehicle’s battery power.
Features such as remote door
unlocking and misplaced vehicle
assistance will not work af ter your
vehicle has been parked f or more
than 48 hours.
OnStar
is a registered trademark of
the OnStar Corporation.
OnStar has an antenna on the roof of
the vehicle. To avoid reception
problems, do not cover this antenna.
As required by the FCC: This device complies with Part 15 of the FCC rules.Operation is subject to the f ollowing twoconditions: (1) This device may notcause harmf ul interf erence, and (2) thisdevice must accept any interf erencereceived, including interf erence thatmay cause undesired operation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210. Operation issubject to the f ollowing two conditions:(1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.System Limitations
OnStar
186
Page 188 of 311
Bef ore you begin driving your
vehicle, you should know what
gasoline to use and how to check the
levels of important f luids. You also
need to know how to properly store
luggage or packages. The
inf ormation in this section will help
you. If you plan to add any
accessories to your vehicle, please
read the information in this section
first..............................
Break-in Period .188
...............................
Gasoline Type .188
.........
Service Station Procedures . 189
....................................
Ref ueling .189
Opening and Closing the ........................................
hood .190
...................................
Oil Check .191
.............
Engine Coolant Check . 192
...............................
Fuel Economy .192
...
Accessories and Modif ications . 193
.............................
Carrying Cargo .195
Bef ore Driving
Bef ore Driving
187
Page 189 of 311

Help assure your vehicle’s f uture
reliability and perf ormance by paying
extra attention to how you drive
during the f irst 600 miles (1,000 km).
During this period:Avoid full-throttle starts and rapid
acceleration.
Do not change the oil until the
scheduled maintenance time. Avoidhardbrakingforthefirst
200 miles (300 km).
Do not tow a trailer.
You should also f ollow these
recommendations with an
overhauled or exchanged engine, or
when the brakes are replaced. Use of gasoline with these additives
may adversely af f ect perf ormance,
and cause the Malfunction Indicator
Lamp on your instrument panel to
come on. If this happens, contact
your authorized Acura dealer f or
service.
Some gasoline today is blended with
oxygenates such as ethanol or
MTBE. Your vehicle is designed to
operate on oxygenated gasoline
containing up to 10 percent ethanol
by volume and up to 15 percent
MTBE by volume. Do not use
gasoline containing methanol.
If you notice any undesirable
operating symptoms, try another
service station or switch to another
brand of gasoline.
For f urther important f uel-related
inf ormation, please ref er to your
.
In addition, in order to maintain good
perf ormance, f uel economy, and
emissions control, we strongly
recommend, in areas where it is
available, the use of gasoline that
does NOT contain manganese-based
f uel additives such as MMT. Your vehicle is designed to operate
on premium unleaded gasoline with a
pump octane number of 91 or higher.
Useof aloweroctanegasolinecan
cause occasional metallic knocking
noises in the engine and will result in
decreased engine perf ormance.
We recommended using a quality
gasoline containing detergent
additives that help prevent fuel
system and engine deposits. Use of a gasoline with a pump octane
less than 87 can lead to engine
damage.
Break-in Period
Fuel Recommendation
Quick Start Guide
Break-in Period, Fuel Recommendation
188
Page 190 of 311

Remove the f uel f ill cap slowly.
You may hear a hissing sound as
pressure inside the tank escapes.
Place the cap in the holder on the
fuel fill door.
Stop f illing the tank af ter the f uel
nozzle automatically clicks of f . Do
not try to ‘‘top off’’ the tank. Leave
some room f or the f uel to expand
with temperature changes.even
though the tank is not full, there may
be a problem with your vehicle’s f uel
vapor recovery system. The system
helps keep f uel vapors f rom going
into the atmosphere. Consult your
dealer.
Open the f uel f ill door by pulling
onthehandletotheleftof the
driver’s seat. Park with the driver’s side closest
to the service station pump.
1.
2. 3.
4.
If the f uel nozzle keeps clicking of f
CONT INUED
Service Station Procedure
Ref ueling
Bef ore Driving
189
Pull
FUEL FILL CAP
Gasoline is highly flammable
and explosive. You can be
burned or seriously injured
when handling fuel.Stop the engine, and keep
heat, sparks, and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.
Page 191 of 311
Park the vehicle, and set the
parking brake. Pull the hood
release handle located under the
lower lef t corner of the dashboard.
The hood will pop up slightly.Put your f ingers under the f ront
edge of the hood near the center.
Slide your hand to your lef t until
you f eel the hood latch handle.
Push this handle up until it
releases the hood. Lif t up the hood.
If the hood latch handle moves stif f ly,
or if you can open the hood without
lifting the handle, the mechanism
should be cleaned and lubricated.
Screw the fuel fill cap back on
until it clicks at least once. If you
do not properly tighten the cap,
the Malf unction Indicator lamp
maycomeon(seepage ).
Push the f uel f ill door closed until
it latches.
1.
5.
6.
2.
273
Service Station Procedure
Opening and Closing the Hood
190
HOOD RELEASE HANDLE
LATCH
Page 192 of 311
Lif t the hood up most of the way.
The hydraulic supports will lif t it
uptherestof thewayandholdit
up.Wait a f ew minutes af ter turning the
engine of f bef ore you check the oil. Remove the dipstick again, and
check the level. It should be
between the upper and lower
marks.
If it is near or below the lower mark,
see on page .
To close the hood, lower the hood to
about a f oot (30 cm) above the
f ender, then press down f irmly with
your hands. Make sure it is securely
latched.
Remove the dipstick (orange loop).
Wipe the dipstick with a clean
cloth or paper towel.
Insert it all the way back in its hole.
1.
3.
3. 2.4.
237
Service Station Procedure
A dding Oil
Oil Check
Bef ore Driving
191
DIPSTICK
UPPER MARK
LOWER MARK