2006 Acura MDX Owner's Manual

Press this button to contact an
OnStar advisor. You will hear a
chime, f ollowed by the
announcement, ‘‘Connecting to
OnStar.’’ The connection should take
20 to 30 seconds. The advisor will
assist you with any of the services
included in your plan.
Depending on what service you
request, you may need to give your
Personal Identification Number
(PIN) to the advisor. Your PIN is a
number you make up and provide
when you establish your OnStar
service.
If cellular telephone service is not
available in the area you are driving
in, you will hear a f ast busy signal.
The system will retry the connection
several times bef ore returning to the
ready mode.A microphone is located on the
ceiling, between the f ront map lights
and the console buttons you can
speak to the advisor without taking
your hands of f the steering wheel or
diverting your attention f rom the
road. The OnStar advisor’s voice
comes f rom the audio system’s
speakers. Use the volume control on
the audio system or on the steering
wheel to adjust the volume.
You can record up to 5 minutes of
inf ormation f rom your OnStar
AdvisorortheVirtualAdvisor.This
is helpf ul f or reviewing the route,
hotel, or restaurant information you
receive f rom the OnStar center.To record a message:
During your call, the Advisor or
Virtual Advisor, press and release
the OnStar button. The system
beeps to indicate that it is
recording.
When you are f inished recording,
press and release the OnStar
button again. The system beeps
and stops recording.
To hear the first playback of a
message:
Say ‘‘Advisor playback.’’ The
recorded message is played
through the audio system
speakers. Press the CALL ANSWER/CALL
END button. The system responds
with ‘‘OnStar replay.’’
When you are f inished listening,
press the CALL ANSWER/CALL
END button. The system responds
with ‘‘Goodbye.’’
To cancel these retries, press the
white phone button.
OnStar Services Button
Recording an A dvisor or Virtual
Advisor Message
OnStar
176

µ
To hear a message again:
Say ‘‘Advisor playback.’’ The
system responds with ‘‘Play or
Resume.’’
If you say ‘‘Play,’’ the message
plays f rom the beginning. If you
say ‘‘Resume,’’ the message plays
f rom the point you previously
stopped it.
Recording a new message will delete
the previous message. Press this button to contact an
OnStar advisor only if you have an
emergency situation. You will hear a
tone, f ollowed by the announcement,
‘‘Connecting to OnStar Emergency.’’
Your call is given highest priority.
The advisor will ask about the nature
of the emergency, locate your
vehicle, and notif y the appropriate
emergency service agencies.
Press the ‘‘phone ’’ button to send
dial tones (example automated
phone systems) while in an OnStar
personal call.
PressthisCALLANSWER/CALL
END button to end a call to the
OnStar advisor. If the OnStar center
calls you, press this button to answer
the call.
This button is also used to initiate
the Personal Calling and Virtual
Advisor services, if you have
subscribed.
Press the CALL ANSWER/CALL
END button. The system responds
with ‘‘OnStar ready.’’
Emergency Button
Call A nswer/Call End
ButtonVoice A ctivated K eypad
OnStar
Features
177

µµ
µ
µ
µ
µ
µ
µ If you are ever in an
accident that causes the airbags to
deploy, the OnStar system
automatically places a call (provided
the OnStar system and your vehicle’s
electrical system are still intact). The
advisor will attempt to speak to you
to evaluate the situation, and contact
the nearest emergency services
provider.
The OnStar
advisor can help you if you are ever
in a minor accident by asking you f or
inf ormation about the accident.
Complete, detailed inf ormation will
make it easier to complete accident
reports and insurance claims.
The OnStar system uses the global
positioning system (GPS) to locate
your vehicle whenever you place a
call. This allows the advisor to
quickly contact the nearest services
without requiring you to provide
detailed directions.
Contact
the OnStar advisor if you need
assistance with a problem (f lat tire,
out of f uel, etc.) while traveling. The
advisor will contact an appropriate
agency to come and assist you.
Contact an
OnStar advisor if you have an
emergency situation. The advisor
will contact the nearest emergency
services provider (ambulance, f ire
department, etc.) and advise them of
your situation.
This indicator shows you the status
of the system.
The system is ready
for use.
Acallisin
progress.
There is a problem
with the system. Press the OnStar
button to contact an advisor. If the
call connects, the advisor will assist
you with verif ying the system’s
operation. If you are not able to
contact an advisor, take your vehicle
to an Acura dealer to have the
system diagnosed.
There is a problem
with the system while a call is in
progress. A utomatic Notif ication of A irbag
Deployment
Accident Assist
Saf e and Sound Plan Features
Roadside Assistance
Emergency Services
System Status Indicator
Solid Green
Blinking Green
Solid Red
Blinking Red
OnStar
178

µµ
µ
µ
µ µ
µ
The OnStar advisor can
give you inf ormation on nearby
hotels, restaurants, ATMs, hospitals,
gas stations, and many other
services in any area you are traveling
in. The advisor can also help you
with hotel or restaurant reservations. If you need a ride
(taxi, limousine service, etc.) the
OnStar advisor can make the
arrangements f or you. Use the
OnStar button, or call
(888) 4-ONSTAR. The OnStar
advisor can give you verbal
directions f rom your current location
to a desired destination. The Directions and Connections
Plan provides these additional
f eatures.
By sending a signal to your
vehicle, the advisor can lock or
unlock your vehicle’s doors. This is
helpfulif youareawayfromyour
vehicle and realize you f orgot to lock
the doors, or if you have locked the
keys in your vehicle. To get OnStar’s
assistance, call (888) 4-ONSTAR
(466-7827).
Using
GPS, OnStar can locate your vehicle
almost anywhere. If your vehicle is
ever stolen, contact OnStar at
(888) 4-ONSTAR. The advisor will
put you in contact with the proper
authorities, and assist them with
locating your vehicle. If you are unable to locate your
vehicleinalargeparkinglotor
parking structure, contact OnStar at
(888) 4-ONSTAR. The advisor will
remotely activate the exterior lights
and the horn, allowing you to locate
your vehicle.
From your computer, you can log
into www. myonstar.com to make
dinner reservations, purchase tickets
to events, send f lowers, etc.
Inf ormation and Convenience
Services Ride Assist Route Support Directions and Connections Plan
Features
Remote Door L ocking/Unlocking
Stolen Vehicle T racking Misplaced Vehicle Assistance
Online Concierge Services
OnStar
Features
179

µµ
The Luxury and Leisure plan
provides all the benef its of the other
plans, and adds:
An OnStar advisor can assist you
with purchasing theater tickets,
airline tickets, rental car reservations
for a vacation, and just about any
other purchase you desire. The OnStar Personal Calling plan is
an extra-cost option that gives you
the ability to use your vehicle’s
OnStar system as a hands-f ree
cellular telephone.
To sign up f or Personal Calling,
press the OnStar button in your
vehicle, and notify the advisor that
you’d like to sign up. The advisor will
get all the information needed to set
up your account, and provide you
with your new cellular telephone
number. You
must use voice commands to give
the OnStar system your calling
inf ormation. To make a phone call:
Press the CALL ANSWER/CALL
END button.
Say ‘‘Yes’’ to dial the number, or
‘‘No’’ to try again. OnStar will repeat the number,
andthensay‘‘YesorNo.’’ Say the entire number without
pausing. OnStar will respond with ‘‘Phone
number to dial, please.’’ Say ‘‘Dial.’’
OnStar will respond with ‘‘OnStar
ready.’’
OnStar will respond with ‘‘Dialing.’’
When you have f inished your
conversation, press the white
phone button again to hang up.
You will need to provide a credit card
number, and prepurchase ‘‘units’’ or
minutes of air time (one unit equals
1 minute).
Luxury and Leisure Plan
Features
Personal Concierge Services
Personal Calling
Placing a Telephone Call
OnStar
180

If you need to cancel the phone call
attempt bef ore entering the
complete phone number, say ‘‘Cancel.’’
The system will cancel the operation
and return to Ready.You can also enter the number one
digit at a time. To make a phone call:
If you make a mistake speaking a
digit of the phone number, or the
system responds with the wrong
digit, say ‘‘Clear.’’ This will cause the
system to erase the last digit.
If you make a mistake speaking the
phone number, or the system
responds with the wrong number,
say ‘‘Clear.’’ This will cause the
system to erase the number.
If you need to cancel the phone call
attempt bef ore entering the
complete phone number, say ‘‘Cancel.’’
The system will cancel the operation
and return to Ready.
Press the CALL ANSWER/CALL
END button.
When you have f inished your
conversation, press the CALL
ANSWER/CALL END button
again to hang up. OnStar will respond with ‘‘Dialing.’’
It will then place the telephone call. Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Dial.’’ OnStar will repeat that digit. Say the second digit of the number. OnStar will repeat that digit.
Always wait f or OnStar to conf irm
the digit bef ore going to the next
digit. Say the f irst digit of the number. OnStar will respond with ‘‘First
digit to dial, please.’’ Say ‘‘Digit dial.’’
OnStar will respond with ‘‘OnStar
ready.’’
CONT INUED
OnStar
Features
181

µµ
µ µµ
If the system has difficulty
understanding a voice command, it
canrespondwith:
‘‘Pardon’’ The system could not
match your voice command to one it
knows. Repeat the command
distinctly.
‘‘Slower please’’ The system
missed the command because it was
not ready for it, or there was too
much background noise. Repeat the
command after a short pause.
You
cansenddialtonesduringOnStar
Personal Calling. While in a personal call, press the
Voice Activated Key-Pad Button.
OnStar will respond with ‘‘First
digit to send please.’’
Say the f irst digit of the number
you want to send.
OnStar will repeat that digit.
Always wait f or OnStar to conf irm the digit bef ore going to the next
digit.
OnStar will repeat that digit.
Say the second digit of the number.
Continue this until you have given
OnStar the complete number.
Then say ‘‘Send.’’ OnStar will send
the number by dial tones.
When someone places a telephone
call to you, the audio system will
mute and you will hear the ring.
Press the white phone button to
answer the call. When you have
completed the call, press the white
phone button again to hang up.
The OnStar system can store up to
twenty 32-digit telephone numbers in
its memory. When you store these
numbers in its memory, you give
each one a name tag. When you want
to place a telephone call, you can
recall the number by giving the system the name tag.
To store a
telephone number and its name tag
in the system:
Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Store.’’
OnStar will respond with ‘‘Phone
number to store, please.’’
Say the entire number.
OnStar will repeat the number,
andthensay‘‘YesorNo.’’
Say ‘‘Yes,’’ or say ‘‘No’’ to try again.
OnStar will respond with ‘‘Name
tag, please.’’
Say the name that you want
assigned to that telephone number.
Voice A ctivated K ey-Pad Incoming Telephone Calls
Using Name TagsStoring a Name T ag
OnStar
182

µ
»¼
»¼
µ
»¼
»¼
»¼ To delete a
name tag and telephone number
f rom memory:
OnStar will respond with ‘‘Ready.’’
Say ‘‘Delete.’’
OnStar will respond with ‘‘Name
tag, please.’’
Say the name tag f or the number
you want to delete.
OnStar will respond with ‘‘Deletename tag , yes or no.’’
Say ‘‘Yes.’’
OnStar will respond with ‘‘Deleting name tag .’’
To
place a telephone call using a name
tag:
You can also store a telephone
number and its name tag one digit at
a time. To store them in the system:
Press the VOICE ACTIVATED
KEYPAD button.
OnStar will respond with ‘‘Name
tag, please.’’ Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Store’’ again. Say the second digit of the number. OnStar will repeat that digit.
Say the f irst digit of the number. OnStar will respond with ‘‘First
digit to store, please.’’ Say ‘‘Digit store.’’
OnStar will respond with ‘‘OnStar
ready.’’ Press the CALL ANSWER/CALL
END button.
If you have forgotten what name
tags you have stored, the system will
read them to you. Press the CALL
ANSWER/CALL END button. When
the system responds with ‘‘Ready,’’
say ‘‘Directory.’’ OnStar will respond with ‘‘Calling
name tag ,’’ then place the
telephone call. Say the name tag f or the number
you want to call. OnStar will respond with ‘‘Name
tag, please.’’ Say ‘‘Call.’’ OnStar will respond with ‘‘Ready.’’ Press the CALL ANSWER/CALL
END button.
Say ‘‘Yes.’’ Say ‘‘New name tag.’’
OnStar will respond with ‘‘Store new name tag , Yes or No.’’
OnStar will respond with ‘‘Storing new name tag .’’
CONT INUED
Deleting a Name tag
Placing a Telephone Call
OnStar
Features
183