2006 ACURA CSX clutch

´´´
´
Î
ØÚ Ó
Ú
Electronic Control System (cont’d)
PCM A/T Control System Inputs and Outputs (cont’d)
PCM CONNECTOR B (44P)Wire Color Terminal Name Description SignalTerminalNumber
14-50Automatic Transmission
System Description (cont’d)
A (44P)
B (44P) C (44P)
PCM Connector Terminal Locations




B9 BLU/WHT OP3SW (3RD CLUTCH
TRANSMISSION FLUID
PRESSURE SWITCH) Detects 3rd clutch
transmission fluid pressure
switch signalWith ignition switch ON (II):
Without 3rd clutch pressure: about 5.0 V
With 3rd clutch pressure: about 0 V
B10 BLU/BLK SHA (SHIFT SOLENOID VALVE A) Drives shift solenoid
valve AWith engine running in R, D and S (in 1st, 4th, and
5th gears): about battery voltage
With engine running in P, N, D and S (in 2nd and 3rd
gears): about 0 V
B11 GRN/WHT SHB (SHIFT SOLENOID VALVE B) Drives shift solenoid
valve BWith engine running in P, R, N, D and S (in 1st and
2nd gears): about battery voltage
With engine running in D and S (in 3rd, 4th, and 5th
gears): about 0 V
B12 RED/BLK ATPN (TRANSMISSION RANGE SWITCH NEUTRAL) Detects transmission range
switch N position signalIn N: about 0 V
In any position other than N: more than 5.0 V
B13 BLU/BLK ATPP (TRANSMISSION RANGE SWITCH PARK) Detects transmission range
switch P position signalIn P: about 0 V
In any position other than P: more than 5.0 V
B14 WHT ATPR (TRANSMISSION RANGE SWITCH R) Detects transmission range
switch R position signalIn R: about 0 V
In any position other than R: more than 5.0 V
B15 RED ATPS (TRANSMISSION RANGE SWITCH S) Detects transmission range
switch S position signalIn S: about 0 V
In any position other than S: about battery voltage
B16 BLU/YEL SUPP (PADDLE SHIFTER (UPSHIFT SWITCH)) Detects paddle shifter
(upshift switch) signalIn S:
With paddle shifter (upshift switch) pressed:
about 0 V
With paddle shifter (upshift switch) released:
about battery voltage
B17 WHT/RED NM (INPUT SHAFT (MAINSHAFT) SPEED
SENSOR) Detects input shaft
(mainshaft) speed sensor
signalWith ignition switch ON (II): about 0 V
With engine idling in N: about 2.5 V
B18 YEL/BLU VCC2 (SENSOR VOLTAGE) Provides sensor reference voltageWith ignition switch ON (II): about 5.0 V
B20 GRN SHC (SHIFT SOLENOID VALVE C) Drives shift solenoid
valve CWith engine running in N, D and S (in 1st, 3rd, and
5th gears): about battery voltage
With engine running in P, R, D and S (in 2nd and 4th
gears): about 0 V
NOTE: Standard battery voltage is about 12 V.
Terminal side of female terminals
08/08/21 14:38:26 61SNR030_140_0052
ProCarManuals.com
DYNOMITE -2009-

µ
Ú
PCM CONNECTOR B (44P)
Wire Color Terminal Name Description Signal
TerminalNumber
14-51
B21 YEL/GRN ATPD (TRANSMISSION RANGE SWITCH D) Detects transmission range
switch D position signalIn D: about 0 V
In any position other than D: about battery voltage
B22 RED/WHT ATPRVS (TRANSMISSION RANGE SWITCH RVS) Detects transmission range
switch R position signalIn R: about 0 V
In any position other than R: about battery voltage
B24 YEL SHE (SHIFT SOLENOID VALVE E) Drives shift solenoid valve E With engine running in P and R: about battery
voltage
With engine running in N, D and S (in 1st gear):
about 0 V
B25 BLU/YEL LSC (A/T CLUTCH PRESSURE CONTROL
SOLENOID VALVE C) Drives A/T clutch pressure
control solenoid valve C
With ignition switch ON (II): current controlled
B26 GRN/RED SHD (SHIFT SOLENOID VALVE D) Drives shift solenoid
valve DWith engine running in D and S (in 2nd and 5th
gears): about battery voltage
With engine running in P, R, N, D and S (in 1st, 3rd,
and 4th gears): about 0 V
B27 RED/YEL ATFT (ATF TEMPERATURE SENSOR) Detects ATF temperature
sensor signalWith igniting switch ON (II): about 0.2 4.8 V
depending on ATF temperature
(about 1.8 V at operating temperature)
B28 BLU/YEL ATPFWD (TRANSMISSION RANGE SWITCH FWD) Detects transmission range
switch D and S positions
signalIn D and S: about 0 V
In any position other than D and S: about battery
voltage
B33 GRN/BLK SG2 (SENSOR GROUND) Sensor ground Less than 1.0 V at all times
NOTE: Standard battery voltage is about 12 V.
(cont’d)
08/08/21 14:38:26 61SNR030_140_0053
ProCarManuals.com
DYNOMITE -2009-

µµµ
µ
Î
ØÚ Ó
Ú
Ó
Electronic Control System (cont’d)
PCM A/T Control System Inputs and Outputs (cont’d)
PCM CONNECTOR B (44P)Wire Color Terminal Name Description Signal
PCM CONNECTOR C (44P) Wire Color Terminal Name Description SignalTerminalNumber
Terminal Number
14-52Automatic Transmission
System Description (cont’d)
A (44P)
B (44P) C (44P)
PCM Connector Terminal Locations


B35 BRN LSB (A/T CLUTCH
PRESSURE CONTROL
SOLENOID VALVE B) Drives A/T clutch pressure
control solenoid valve B
With ignition switch ON (II): current controlled
B36 BLK PG1 (POWER GROUND) Ground circuit for PCM circuitLess than 1.0 V at all times
B40 BRN SDNP (PADDLE SHIFTER (DOWNSHIFT SWITCH)) Detects paddle shifter
(downshift switch) signalIn S:
With paddle shifter (downshift switch) pressed:
about 0 V
With paddle shifter (downshift switch)
released: about 5.0 V
B44 RED/BLK LSA (A/T CLUTCH PRESSURE CONTROL
SOLENOID VALVE A) Drives A/T clutch pressure
control solenoid valve A
With ignition switch ON (II): current controlled
NOTE: Standard battery voltage is about 12 V.
C13 YEL/RED VCC1 (SENSOR VOLTAGE) Provides sensor reference voltageWith ignition switch ON (II): about 5.0 V
C14 GRN/WHT SG1 (SENSOR GROUND) Sensor ground Less than 1.0 V at all times
C36 BLK/GRN IG1 (IGNITION SIGNAL) Detects ignition signal With ignition switch ON (II): about battery voltage
C40 BRN/YEL LG1 (LOGIC GROUND) Ground circuit for PCM circuitLess than 1.0 V at all times
C43 BLK/WHT NC (OUTPUT SHAFT (COUNTERSHAFT) SPEED
SENSOR) Detects output shaft
(countershaft) speed sensor
signalWith ignition switch ON (II): pulses
With vehicle moving: about 5.0 V (pulses)
C44 BRN/YEL LG2 (LOGIC GROUND) Ground circuit for PCM circuitLess than 1.0 V at all times
NOTE: Standard battery voltage is about 12 V.
Terminal side of female terminals
08/08/21 14:38:27 61SNR030_140_0054
ProCarManuals.com
DYNOMITE -2009-


(#'


)
Hydraulic Controls
Valve Bodies
14-53
SHIFT SOLENOID
VALVE DSHIFT SOLENOID
VALVE E
SHIFT SOLENOID
VALVE C
SHIFT SOLENOID
VALVE A
SHIFT SOLENOID
VALVE B A/T CLUTCH PRESSURE
CONTROL SOLENOID
VALVE B
A/T CLUTCH PRESSURE
CONTROL SOLENOID
VALVE C
A/T CLUTCH PRESSURE
CONTROL SOLENOID
VALVE A
SERVO BODY
REGULATOR
VALVE BODY
MAIN VALVE BODY
The valve body includes the main valve body, the regulator valve body, and the servo body. The ATF pump is driven
by splines on the end of the torque converter which is attached to the engine. Fluid flows through the regulator valve
to maintain specified pressure through the main valve body to the manual valve, directing pressure to the shift valves
and to each of the clutches via the shift solenoid valves. Shift solenoid valves A, B, C, D, and E are bolted on the servo
body. A/T clutch pressure control solenoid valves A, B, and C are mounted on the outside of the transmission housing.
(cont’d)
08/08/21 14:38:27 61SNR030_140_0055
ProCarManuals.com
DYNOMITE -2009-

(#'


)
Hydraulic Flow
Distribution of Hydraulic Pressure
Hydraulic Pressure at the Port for use in the hydraulic circuitPortNo. Hydraulic Pressure Port
No.Hydraulic Pressure
14-57
As the engine turns, the ATF pump starts to operate. Automatic transmission fluid (ATF) is drawn through the ATF
strainer (filter) and discharged into the hydraulic circuit. Then, ATF flowing from the ATF pump becomes line pressure
that is regulated by the regulator valve. Torque converter pressure from the regulator valve enters the torque
converter through the lock-up shift valve, and it is discharged from the torque converter. The torque converter check
valve prevents torque converter pressure from rising.
The PCM switches shift solenoid valves ON and OFF. The shift solenoid valve intercepts line pressure from the ATF
pump via the manual valve when the shift solenoid valve is OFF. When the shift solenoid valve is turned ON by the
PCM, line pressure changes to shift solenoid valve pressure at the shift solenoid valve, then the shift solenoid valve
pressure flows to the shift valve. Applying shift solenoid pressure to the shift valves moves the position of the shift
valve, and switches the port of the hydraulic circuit. The PCM also controls A/T clutch pressure control solenoid valves
A, B, and C. The A/T clutch pressure control solenoid valves regulate hydraulic pressure, and applies pressure to the
clutches to engage smoothly. The clutches receive optimum clutch pressure which is regulated by the A/T clutch
pressure control solenoid valves for comfortable driving and shifting under all conditions.
1 Line SB Shift solenoid valve B
3 Line SC Shift solenoid valve C
3’ Line SD Shift solenoid valve D 4 Line SE Shift solenoid valve E
4’ Line 10 1st clutch
4’’ Line 20 2nd clutch 7 Line 30 3rd clutch
1A 40 4th clutch 1B 50 5th clutch
3A 55 A/T clutch pressure control solenoid valve A 3B 55’ A/T clutch pressure control solenoid valve A
3C 56 A/T clutch pressure control solenoid valve B
5A 57 A/T clutch pressure control solenoid valve C 5B 90 Torque converter
5C 91 Torque converter
5D 92 Torque converter 5E 93 ATF cooler5F 94 Torque converter
5G A/T clutch pressure control solenoid valve B 95 Lubrication 5H A/T clutch pressure control solenoid valve C 96 Torque converter 5J A/T clutch pressure control solenoid valve C 97 Torque converter
5K A/T clutch pressure control solenoid valve C 99 Suction 5L A/T clutch pressure control solenoid valve C X Drain
5N A/T clutch pressure control solenoid valve C HX High position drain
SA Shift solenoid valve A AX Air drain
(cont’d)
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve B
Line or A/T clutch pressure control solenoid valve A or
B
08/08/21 14:38:29 61SNR030_140_0059
ProCarManuals.com
DYNOMITE -2009-

Î
Hydraulic Flow (cont’d)
N Position
14-58Automatic Transmission
System Description (cont’d)
TORQUE
CONVERTER
2ND
ACCUMU-
LATOR2ND
CLUTCH
3RD
CLUTCH 4TH
CLUTCH5TH
CLUTCH
4TH
ACCUMULATOR
TORQUE
CONVERTER
CHECK
VALVE SHIFT
SOLENOID
VALVES
SHIFT
VALVE D
SHIFT
VALVE A
LOCK-UP
SHIFT
VALVE
LOCK-UP
CONTROL
VALVE
RELIEF VALVE
COOLER
CHECK
VALVE
ATF
COOLER REGULATOR
VALVE SERVO VALVE SERVO
CONTROL
VALVE
MANUAL VALVE ATF PUMP
3RD CLUTCH
TRANSMISSION FLUID
PRESSURE SWITCH
1ST
CLUTCH
A/T CLUTCH
PRESSURE CONTROL
SOLENOID VALVES
3RD
ACCUMULATOR
1ST
ACCUMULATOR
5TH
ACCUMULATOR
2ND CLUTCH
TRANSMISSION FLUID
PRESSURE SWITCH
SHIFT
VALVE
C
SHIFT
VALVE
B SHIFT
VALVE E
20
30 50
SB
1
SA
5B
5A
SC
5K 5B
5C
4
4
3B4
5A
5F SB
55 1
90
94
SE
94
91
96 93
7
55
90
95
90
93
93
99 192
1
95 HX
1B 3
3’ 4
5G
91
X X
X
X
X X
10
97
93 X
95
56 40
50
10
55’ 90 96
X 7 AX
AX
HX
4’’3A
3A
71A
3
3’
3C
5N 5E
3C
5L
5J
SA
40
X 5F
5H
10
1
55
1 56
4’’ 57
4
95
30 30
95
10 40
20
57 X
XX
X
5H 5G 5E5C
X
X 92 X
5N 55’
50 30 1A
5K
92 4’X
5J5L
55’
1
57
SD
XX
SE
X X 3
X
57
SE
1
20
XX 1B 20X
X
3A X X
X
X
X
SC
SD
AX
3B
X 4’
X
X
AX
X
X
AX
X
X
IDLER
SHAFT
COUNTER-
SHAFT
SECONDARY
SHAFT MAINSHAFT IDLER GEAR
FINAL DRIVE
GEAR
A: OFF
B: ON
C: ON
D: OFF
E: OFF
A
B
C
The PCM controls the shift solenoid valves. The conditions of the shift solenoid valves and positions of the shift valves
are as follows:  Shift solenoid valve A: OFF, and shift valve A remains on the right side
 Shift solenoid valve B: ON, and shift valve B moves to the left side
 Shift solenoid valve C: ON, and shift valve C moves to the left side
 Shift solenoid valve D: OFF, and shift valve D remains on the left side
 Shift solenoid valve E: OFF, and shift valve E remains on the left side
Line pressure (1) flows to the shift solenoid valves and A/T clutch pressure control solenoid valve A. Under this
condition, hydraulic pressure is not applied to the clutches.
NOTE: When used, ‘‘left’’ or ‘‘right’’ indicates direction on the hydraulic circuit.
08/08/21 14:38:31 61SNR030_140_0060
ProCarManuals.com
DYNOMITE -2009-

Î1st gear shifting from N position
14-59
TORQUE
CONVERTER
2ND
ACCUMU-
LATOR2ND
CLUTCH
3RD
CLUTCH 4TH
CLUTCH5TH
CLUTCH
4TH
ACCUMULATOR
TORQUE
CONVERTER
CHECK
VALVE SHIFT
SOLENOID
VALVES
SHIFT
VALVE D
SHIFT
VALVE A
LOCK-UP
SHIFT
VALVE
LOCK-UP
CONTROL
VALVE
RELIEF VALVE
COOLER
CHECK
VALVE
ATF
COOLER REGULATOR
VALVE SERVO VALVE SERVO
CONTROL
VALVE
MANUAL VALVE ATF PUMP
3RD CLUTCH
TRANSMISSION FLUID
PRESSURE SWITCH
1ST
CLUTCH
A/T CLUTCH
PRESSURE CONTROL
SOLENOID VALVES
3RD
ACCUMULATOR
1ST
ACCUMULATOR
5TH
ACCUMULATOR
2ND CLUTCH
TRANSMISSION FLUID
PRESSURE SWITCH
SHIFT
VALVE
C
SHIFT
VALVE
B SHIFT
VALVE E
20
30 50
SB
1
SA
5B
5A
SC
5K 5B
5C
4
4
3B4
5A
5F SB
55 1
90
94
SE
94
91
96 93
7
55
90
95
90
93
93
99 192
1
95 HX
1B 3
3’ 4
5G
91
X X
X
X
X X
10
97
93 X
95
56 40
50
10
55’ 90 96
X 7 AX
AX
HX
4’’3A
3A
71A
3
3’
3C
5N 5E
3C
5L
5J
SA
40
X 5F
5H
10
1
55
1 56
4’’ 57
4
95
30 30
95
10 40
20
57 X
XX
X
5H 5G 5E5C
X
X 92 X
5N 55’
50 30 1A
5K
92 4’X
5J5L
55’
1
57
SD
XX
SE
X X 3
X
57
SE
1
20
XX 1B 20X
X
3A X X
X
X X
SC
SD
AX
3B
X 4’
X
X
AX
X
X
AX
X
X
A: OFF
B: ON
C: ON
D: OFF
E: OFF
A
B
C
IDLER
SHAFT
COUNTER-
SHAFT
SECONDARY
SHAFT MAINSHAFT IDLER GEAR
FINAL DRIVE
GEAR
The shift solenoid valves remain the same as in N when shifting to D from N. The manual valve is moved to the D
position, and uncovers line pressure port (4) leading to A/T clutch pressure control solenoid valve C. Hydraulic
pressure to the 1st clutch from A/T clutch pressure control solenoid valve A is created as shift solenoid valve A OFF,
and B and C remain ON. A/T clutch pressure control solenoid valve A pressure (55) changes to 1st clutch pressure (10)
at shift valve B, and flows to the 1st clutch. The 1st clutch is engaged gently when shifting to D from N.
NOTE: When used, ‘‘left’’ or ‘‘right’’ indicates direction on the hydraulic circuit.
(cont’d)
08/08/21 14:39:21 61SNR030_140_0061
ProCarManuals.com
DYNOMITE -2009-

àµ àµ à µ
ൠൠà
Î
Hydraulic Flow (cont’d)
Driving in 1st gear in D and S with automatic shift mode
14-60 Automatic Transmission
System Description (cont’d)
TORQUE
CONVERTER
2ND
ACCUMU-
LATOR2ND
CLUTCH
3RD
CLUTCH 4TH
CLUTCH5TH
CLUTCH
4TH
ACCUMULATOR
TORQUE
CONVERTER
CHECK
VALVE SHIFT
SOLENOID
VALVES
SHIFT
VALVE D
SHIFT
VALVE A
LOCK-UP
SHIFT
VALVE
LOCK-UP
CONTROL
VALVE
RELIEF VALVE
COOLER
CHECK
VALVE
ATF
COOLER REGULATOR
VALVE SERVO VALVE SERVO
CONTROL
VALVE
MANUAL VALVE ATF PUMP
3RD CLUTCH
TRANSMISSION FLUID
PRESSURE SWITCH
1ST
CLUTCH
A/T CLUTCH
PRESSURE CONTROL
SOLENOID VALVES
3RD
ACCUMULATOR
1ST
ACCUMULATOR
5TH
ACCUMULATOR
2ND CLUTCH
TRANSMISSION FLUID
PRESSURE SWITCH
SHIFT
VALVE
C
SHIFT
VALVE
B SHIFT
VALVE E
20
30 50
SB
1
SA
5B
5A
SC
5K 5B
5C
4
4
3B4
5A
5F SB
55 1
90
94
SE
94
91
96 93
7
55
90
95
90
93
93
99 192
1
95 HX
1B 3
3’ 4
5G
91
X X
X
X
X X
10
97
93 X
95
56 40
50
10
55’ 90 96
X 7 AX
AX
HX
4’’3A
3A
71A
3
3’
3C
5N 5E
3C
5L
5J
SA
40
X 5F
5H
10
1
55
1 56
4’’ 57
4
95
30 30
95
10 40
20
57 X
XX
X
5H 5G 5E5C
X
X 92 X
5N 55’
50 30 1A
5K
92 4’X
5J5L
55’
1
57
SD
XX
SE
X X 3
X
57
SE
1
20
XX 1B 20X
X
3A X X
X
X X
SC
SD
AX
3B
X 4’
X
X
AX
X
X
AX
X
X
A: ON
B: ON
C: ON
D: OFF
E: OFF
A
B
C
IDLER
SHAFT
COUNTER-
SHAFT
SECONDARY
SHAFT MAINSHAFT IDLER GEAR
FINAL DRIVE
GEAR
The PCM turns shift solenoid valve A ON, B and C remain ON, and D and E remain OFF. Shift solenoid valve A
pressure (SA) is applied to the right side of shift valve A. Shift valve A is moved to the left side to uncover the line
pressure port leading to the 1st clutch, and to cover the A/T clutch pressure control solenoid valve pressure port.
Fluid flows to the 1st clutch by way of:
Line pressure (1) Shift valve D Line pressure (1A) Shift valve A Line pressure (1B) Manual valve Line
pressure (5A) Shift valve C Line pressure (5B) Shift valve B 1st clutch pressure (10) 1st clutch
The 1st clutch pressure (10) is applied to the 1st clutch, and the 1st clutch is engaged securely.
NOTE: When used, ‘‘left’’ or ‘‘right’’ indicates direction on the hydraulic circuit.
08/08/21 14:39:22 61SNR030_140_0062
ProCarManuals.com
DYNOMITE -2009-