2006 ACURA CSX clutch


Power Flow (cont’d)
In 4th Gear
14-36Automatic Transmission
System Description (cont’d)
COUNTERSHAFT
4TH GEAR
4TH CLUTCH
MAINSHAFT
4TH GEAR
REVERSE SELECTOR
REVERSE SELECTOR HUB
FINAL DRIVEN GEARTORQUE
CONVERTER
COUNTERSHAFT FINAL
DRIVE GEAR
MAINSHAFT
 Hydraulic pressure is applied to the servo valve to engage the reverse selector with the c
ountershaft 4th gear and
the reverse selector hub while the shift lever is in forward range (D and S).
 Hydraulic pressure is also applied to the 4th clutch, then the 4th clutch engages the mainshaft 4th gear with the mainshaft.
 The mainshaft 4th gear drives the countershaft 4th gear and the countershaft.
 Power is transmitted to the final drive gear, which in turn drives the final driven gear.
08/08/21 14:38:19 61SNR030_140_0038
ProCarManuals.com
DYNOMITE -2009-

In 5th Gear
14-37
MAINSHAFT
5TH GEAR
COUNTERSHAFT
5TH GEAR 5TH CLUTCH
FINAL DRIVEN GEARTORQUE
CONVERTER
COUNTERSHAFT FINAL
DRIVE GEAR
MAINSHAFT
 Hydraulic pressure is applied to the 5th clutch, then the 5th clutch engages the mainshaft 5th gear with the
mainshaft.
 The mainshaft 5th gear drives the countershaft 5th gear and the countershaft.
 Power is transmitted to the final drive gear, which in turn drives the final driven gear.
(cont’d)
08/08/21 14:38:20 61SNR030_140_0039
ProCarManuals.com
DYNOMITE -2009-


Power Flow (cont’d)
R Position
14-38Automatic Transmission
System Description (cont’d)
MAINSHAFT
REVERSE GEAR
REVERSE IDLER GEAR
COUNTERSHAFT
REVERSE GEAR4TH CLUTCH
REVERSE SELECTOR
REVERSE SELECTOR HUB
FINAL DRIVEN GEARTORQUE
CONVERTER
COUNTERSHAFT FINAL
DRIVE GEAR
MAINSHAFT
 Hydraulic pressure is applied to the servo valve to engage the reverse selector with the c
ountershaft reverse gear
and the reverse selector hub while the shift lever is in R.
 Hydraulic pressure is also applied to the 4th clutch, then the 4th clutch engages the mainshaft reverse gear with the mainshaft.
 The mainshaft reverse gear drives the c ountershaft reverse gear via the reverse idler gear.
 The rotational direction of the countershaft reverse gear is changed by the r everse idler gear.
 The countershaft r everse gear drives the countershaft via the reverse selector, which drives the reverse selector hub.
 Power is transmitted to the final drive gear, which in turn drives the final driven gear.
08/08/21 14:38:20 61SNR030_140_0040
ProCarManuals.com
DYNOMITE -2009-

Î
(#'


)
´µ
Electronic Control System
Functional Diagram
14-39
*1: ’06-07 models
*2: ’08-09 models Engine RPM Signal
Accelerator Pedal
Position Sensor Signal
Barometric Pressure
Sensor Signal
Manifold Absolute
Pressure Sensor Signal
ATF Temperature
Sensor Signal
Service Check SignalTransmission
Range
Switch
Signal
Brake Pedal Position
Switch Signal PGM-FI Control
System
PCM
A/T Control System Shift Control
 Ascending Control
 Descending
Control
 D-paddle Shift
Control

Clutch Pressure
Control
Lock-up Control
Shift Lock Control Shift Lock Solenoid
Vehicle Speed Signal
Data Link Connector Shift Solenoid Valve E
Shift Solenoid Valve D Shift Solenoid Valve C Shift Solenoid Valve B
Shift Solenoid Valve A
F-CAN Line
Automatic
Five-speed and
ReverseLock-up
ON/OFF
Lock-up
Conditions
Sequential
Sportshift
Control Gauge Control Module
(Tach) A/T Gear
Position Indicator
Engine Coolant
Temperature Sensor Signal
2ndClutchTransmission
Fluid Pressure Switch Signal ABS Modulator-Control
Unit Signal (via F-CAN line)*
Output Shaft (Countershaft)
Speed Sensor Signal
Paddle Shifter /
(Upshift/Downshift Switch) 3rdClutchTransmission
Fluid Pressure Switch Signal
1
VSA Modulator-Control
Unit Signal (via F-CAN line)*2
Input Shaft (Mainshaft)
Speed Sensor Signal
Grade Logic Control
Self-diagnosis/
Fail-safe Function
Communication and
Output Function
A/TClutchPressure
Control Solenoid Valve C A/TClutchPressure
Control Solenoid Valve B A/TClutchPressure
Control Solenoid Valve A
The electronic control system consists of the powertrain control module (PCM), sensors, and solenoid valves.
Shifting and lock-up are electronically controlled for comfortable driving under all conditions.
The PCM receives input signals from sensors, switches, and other control units, processes data, and outputs signals
for the engine control system and the A/T control system. The A/T control system includes shift control, grade logic
control, clutch pressure control, and lock-up control.
The PCM switches the shift solenoid valves and the A/T clutch pressure control solenoid valves ON and OFF to control
gear selection and torque converter clutch lock-up.
(cont’d)
08/08/21 14:38:21 61SNR030_140_0041
ProCarManuals.com
DYNOMITE -2009-

ÎClutch Pressure Control
14-45
PCM
Engine RPM Signal
Engine Coolant
Temperature
Sensor Signal Input Shaft
(Mainshaft)
Speed Sensor Signal
Output Shaft
(Countershaft)
Speed Sensor Signal
ATF Temperature
Sensor Signal Actual
Driving Shift
Position
Correction of Data
Correction of Engine
Coolant Temperature
Sensor Data
Manifold Absolute
Pressure Sensor Signal
3rd Clutch
Transmission Fluid
Pressure Switch Signal 2nd Clutch
Transmission Fluid
Pressure Switch Signal
Correction of ATF
Temperature Sensor
Signal Data
Correction of
Hydraulic Pressure
Applying Timing
Correction of Engine
Torque Signal Data Master Target of
Controlling Current
Decision of
Shifting Mode
Ignition Timing
Requirement
PGM-FI
Control
System
Current
Feedback A/T Clutch Pressure
Control Solenoid
Valves A, B, and C
PGM-FI
Control
System
Throttle Position
Sensor Signal
Barometric Pressure
Sensor Signal
The PCM actuates A/T clutch pressure control solenoid valves A, B, and C to control the clutch pressure. When shifting
between lower and higher gears, the clutch pressure regulated by A/T clutch pressure control solenoid valves A, B,
and C engages and disengages the clutch smoothly.
The PCM receives input signals from the various sensors and the switches, processes data, and outputs current to A/T
clutch pressure control solenoid valves A, B, and C.
(cont’d)
08/08/21 14:38:23 61SNR030_140_0047
ProCarManuals.com
DYNOMITE -2009-


Electronic Control System (cont’d)
Lock-up Control
14-46Automatic Transmission
System Description (cont’d)
PCM
Engine RPM Signal Engine Coolant
Temperature
Sensor Signal Barometric
Pressure
Sensor
Signal
Input Shaft
(Mainshaft)
Speed Sensor Signal Output Shaft
(Countershaft)
Speed Sensor Signal
ATF Temperature
Sensor Signal Actual
Driving
Shift
Position
Transmission Range
Switch Signal
Correction
of ATF
Temperature
Sensor DataShifting Position
Control
Current Feedback
Accelerator Pedal
Position Sensor Signal
Throttle Position
Sensor Signal
Driving
Shift
Position
Information
 Engine Coolant
Temperature Control
Lock-up Control
Lock-up ON/OFF
Control
A/T Clutch Pressure
Control Solenoid
Valve A
Gradient Control
by Magnitude
Fail-safe Control
Lock-up Condition
Control
Master Target of
Controlling Current Shift Solenoid
Valve E
Shift solenoid valve E controls the hydraulic pressure to switch the lock-up shift valve and lock-up ON and OFF. When
the PCM actuates shift solenoid valve E and A/T clutch pressure control solenoid valve A to start lock-up. A/T clutch
pressure control solenoid valve A regulates and applies hydraulic pressure to the lock-up control valve to control the
amount of lock-up. The lock-up mechanism operates in D and S (2nd, 3rd, 4th, and 5th gears).
08/08/21 14:38:24 61SNR030_140_0048
ProCarManuals.com
DYNOMITE -2009-

Î
ØÚÓ´
µ
Electronic Control System (cont’d)
PCM A/T Control System Electrical Connections
14-48 Automatic Transmission
System Description (cont’d)
41
23
41 24
23 4
40
29
26 2
27
20 21
10
89
35 19
16 17 18
36 39 40 44434230
29 32 16 1817
13 14 15
1211 789
654321
31
36 37 4044
42
27 28 29
33 3424 25
20 21 14 15
654
31 23
31
13
9
87
11 12 1514 13 17 18
16
22
21
20 25
32 35 34
33
3028
27
42 43 44
36 22
39
10
26
SHE
B24
RIGHT SUPP
B16
B40
SDNP
LEFT
F-CAN Transceiver
CANL
A37
CANH
A36
Terminal side of female terminals
A (44P) B (44P) C (44P) C44 C40 B1 B36
B15
ATPS
S
Dash-light Brightness Control Circuit
SG1C14
NC C43
VCC1 C13
B33
SG2 B17
NM B18
VCC2
TATF B27 B11
SHB SHA B10
B20
SHC
B26
SHD LSC
B25 B35
LSB
PG1
B28
ATPFWD
N BAT
D
PG2
ATPP
B13
DATA LINK CONNECTOR
R
CPU
LG1
ATPR
B14 SCS
IGNITION SWITCH
LG2
GAUGE CONTROL MODULE (TACH)
B9OP3SW OP2SW
B8 ATPRVS
B22 ATPD
B12
P
S
R
P
ND B21ATPN
BKSW
A40
BRAKE LIGHTS A31 A27SLS PCM
C36 IG1 B44
LSA
BATTERY
IG1
BRAKE PEDAL
POSITION SWITCH SHIFT LOCK
SOLENOID
TRANSMISSION
RANGE SWITCH A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE A
A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE B
A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE C
SHIFT SOLENOID
VALVE A
SHIFT SOLENOID
VALVE B
SHIFT SOLENOID
VALVE C
SHIFT SOLENOID
VALVE D
ATF
TEMPERATURE
SENSOR
OUTPUT SHAFT
(COUNTERSHAFT)
SPEED
SENSOR
INPUT SHAFT
(MAINSHAFT)
SPEED
SENSOR
2ND CLUTCH TRANSMISSION
FLUID PRESSURE SWITCH
3RD CLUTCH TRANSMISSION
FLUID PRESSURE SWITCH
A/T Gear Position Indicator
Driver Circuit
SHIFT
INDICATOR SHIFT SOLENOID
VALVE E
PADDLE SHIFTER (UPSHIFT SWITCH)
PADDLE SHIFTER (DOWNSHIFT SWITCH)
PCM Connector Terminal Locations
08/08/21 14:38:25 61SNR030_140_0050
ProCarManuals.com
DYNOMITE -2009-

Î
ØÚ Ó
Ø
Ú
PCM A/T Control System Inputs and Outputs
PCM CONNECTOR A (44P) Wire Color Terminal Name Description Signal
PCM CONNECTOR B (44P) Wire Color Terminal Name Description SignalTerminalNumber
Terminal Number
14-49
A (44P) B (44P) C (44P)
PCM Connector Terminal Locations
A27 PNK SLS (SHIFT LOCK
SOLENOID) Drives shift lock solenoid With ignition switch ON (II), in P, brake pedal
pressed, and accelerator released: about battery
voltage
A31 BRN SCS (SERVICE CHECK SIGNAL) Detects service check signal With service check signal shorted using HDS: about
0V
With service check signal opened: about 5.0 V
A36 WHT CANH (CAN COMMUNICATION SIGNAL
HIGH) Sends and receives
communication signal
With ignition switch ON (II): about 2.5 V (pulses)
A37 RED CANL (CAN COMMUNICATION SIGNAL
LOW) Sends and receives
communication signal
With ignition switch ON (II): about 2.5 V (pulses)
A40 LT GRN BKSW (BRAKE PEDAL POSITION SWITCH) Detects brake pedal
position switch signalWith brake pedal pressed: about battery voltage
With Brake pedal released: about 0 V
NOTE: Standard battery voltage is about 12 V.


B1 BLK/RED
BLKPG2 (POWER GROUND) Ground circuit for PCM
circuitLess than 1.0 V at all times
B8 BLU/RED OP2SW (2ND CLUTCH TRANSMISSION FLUID
PRESSURE SWITCH) Detects 2nd clutch
transmission fluid pressure
switch signalWith ignition switch ON (II):
Without 2nd clutch pressure: about 5.0 V
With 2nd clutch pressure: about 0 V
NOTE: Standard battery voltage is about 12 V.
*1: ’06 model
*2: ’07-09 models
(cont’d)
*1
*2
Terminal side of female terminals
08/08/21 14:38:26 61SNR030_140_0051
ProCarManuals.com
DYNOMITE -2009-