2006 ACURA CSX brake

(#')
µµ
µ
INTRODUCTION
How to Use This Manual
Safety Messages
Safety Labels
Safety Messages
Instructions
HONDA MOTOR CO., LTD.
Service Publication Office
As sections with * include SRS components;
special precautions are required when servicing.
This manual is divided into multiple sections. The first page of
each section is marked with a black tab that lines up with its
corresponding thumb index tab on this page and the back cover.
You can quickly find the first page of each section without
looking through a full table of contents. The symbols printed at
the top corner of each page can also be used as a quick
reference system.
Each section includes: 1. A table of contents, or an exploded view index showing:  Parts disassembly sequence.
 Bolt torques and thread sizes.
 Page references to descriptions in text.
2. Disassembly/assembly procedures and tools.
3. Inspection.
4. Testing/troubleshooting.
5. Repair.
6. Adjustments.
Your safety, and the safety of others, is very important. To help
you make informed decisions, we have provided safety
messages, and other safety information throughout this manual.
Of course, it is not practical or possible to warn you about all the
hazards associated with servicing this vehicle. You must use
your own good judgment.
You will find important safety information in a variety of forms
including:  on the vehicle.
 preceded by a safety alert symbol and one of three signal words, DANGER, WARNING, or CAUTION.
These signal words mean:
You WILL be KILLED or SERIOUSLY HURT if
you don’t follow instructions.
You CAN be KILLED or SERIOUSLY HURT if
you don’t follow instructions.
You CAN be HURT if you don’t follow
instructions.
 how to service this vehicle correctly and safely.
All information contained in this manual is based on the latest
product information available at the time of printing. We reserve
the right to make changes at anytime without notice. No part of
this publication may be reproduced, or stored in a retrieval
system, or transmitted, in any form by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the
prior written permission of the publisher. This includes text,
figures, and tables.
As you read this manual, you will find information that is
preceded by a symbol. The purpose of this message is
to help prevent damage to your vehicle, other property, or the
environment.
First Edition 10/2008
All Rights Reserved
Specifications apply to Canada
Specifications Maintenance
*Engine Electrical
Fuel and Emissions
*Transaxle
*Steering
*Body
*Body Electrical
*Restraints *Audio, Navigation,
and Telematics
General Information
Engine Mechanical
Engine Cooling
Brakes
(Including VSA)
*Heating, Ventilation, and Air ConditioningSuspension
(Including TPMS)
08/08/21 14:05:21 61SNR030_000_0002
ProCarManuals.com
DYNOMITE -2009-




(#')
Vehicle Lift
Safety Stands Floor Jack
1-11
Lift and Support Points
A
B CC
C
B
A
NOTE: If you are going to remove heavy com
ponents
such as suspension or the fuel tank from the rear of the
vehicle, first support the front of the vehicle with tall
safety stands. When substantial weight is removed
from the rear of the vehicle, the center of gravity can
change, causing the vehicle to tip forward on the lift.
1. Position the lift blocks (A) under the vehicle’s front support points (B) and rear support points (C).
2. Raise the lift a few inches, and rock the vehicle gently to be sure it is firmly supported.
3. Raise the lift to its full height, and inspect the vehicle support points for solid contact with the lift
blocks.
To support the vehicle on safety stands, use the same
support points as for a vehicle lift. Always use safety
stands when working on or under any vehicle that is
supported only by a jack. 1. When lifting the front of the vehicle, set the parking
brake. When lifting the rear of the vehicle, put the
shift lever in reverse for manual transmission, or in
P for automatic transmission.
2. Block the wheels that are not being lifted.
3. Position the floor jack under the front jacking bracket (A) or the rear jacking bracket (B). Center
the jacking bracket on the jack lift platform (C), and
jack up the vehicle high enough to fit the safety
stands under it.
4. Position the safety stands under the support points, and adjust them so the vehicle is level.
5. Lower the vehicle onto the stands.
08/08/21 14:06:05 61SNR030_010_0011
ProCarManuals.com
DYNOMITE -2009-

µµ
Wheel Lift Equipment
This is an acceptable way of towing the
vehicle.
Sling-type Equipment
This method of towing
the vehicle is unacceptable.
Manual Transmission
Automatic Transmission
1-13
The tow truck uses two
pivoting arms that go under the tires (front or rear) and
lift them off the ground. The other two wheels remain
on the ground.
The tow truck uses metal
cables with hooks on the ends. These hooks go around
parts of the frame or the suspension, and the cables lift
that end of the vehicle off the ground. The vehicle’s
suspension and body can be seriously damaged if this
method of towing is attempted.
If the vehicle cannot be transported by a flat-bed, it
should be towed with the front wheels off the ground. If
the vehicle is damaged, and must be towed with the
front wheels on the ground, or with all four wheels on
the ground, do this:
 Release the parking brake.
 Shift the transmission to neutral.
 Leave the ignition switch in ACCESSORY (I) so the steering wheel does not lock.
 Make sure all accessories are turned off to minimize current battery draw.
 Release the parking brake.
 Start the engine.
 Shift to D, then to N.
 Turn off the engine.
 Leave the ignition switch in ACCESSORY (I) so the steering wheel does not lock.
 Make sure all accessories are turned off to minimize current battery draw.
It is best to tow the vehicle no farther than 80 km
(50 miles), and keep the speed below 55 km/h (35 mph).  Improper towing preparation will damage the
transmission. Follow the above procedure exactly. If
you cannot shift the transmission or start the engine
(automatic transmission), the vehicle must be
transported on a flat-bed.
 Trying to lift or tow the vehicle by the bumpers will cause serious damage. The bumpers are not
designed to support the vehicle’s weight.
08/08/21 14:06:05 61SNR030_010_0013
ProCarManuals.com
DYNOMITE -2009-

(#'
/)
Specifications
Standards and Service Limits
Design Specifications
...................................................................................................................
..............................................................
................................................................ ......................................................
........................................................... .....................................................
........................................................................\
....
.......................................
.................................................
........................................................................\
..................................................................
........................................................................\
... .......................................................... ...................................................................................................................
..............................................................
................................................................ ......................................................
........................................................... .....................................................
........................................................................\
....
.......................................
.................................................
........................................................................\
..................................................................
........................................................................\
... ..........................................................
Engine Electrical
. 2-2
Engine Assembly . 2-2
Cylinder Head . 2-3
Engine Block . 2-4
Engine Lubrication . 2-5
Cooling System . 2-6
Fuel and Emissions . 2-7
Clutch . 2-7
Manual Transmission and M/T Differential (5-speed) . 2-8
Manual Transmission and M/T Differential (6-speed) . 2-10
Automatic Transmission and A/T Differential . 2-12
Steering . 2-18
Suspension . 2-18
Brakes . 2-19
Air Conditioning . 2-19
..................................................................
........................................................................\
..
........................................................................\
...
........................................................................\
...
........................................................................\
.... ..............................................................................................
........................................................................\
..................................................................
........................................................................\
...... .........................................................
........................................................................\
... ................................................................................................................... .....................................................
..................................................................
........................................................................\
..
........................................................................\
...
........................................................................\
...
........................................................................\
.... ..............................................................................................
........................................................................\
..................................................................
........................................................................\
...... .........................................................
........................................................................\
... ................................................................................................................... .....................................................
Dimensions
. 2-20
Weight . 2-20
Engine . 2-20
Starter . 2-20
Clutch . 2-20
Manual Transmission . 2-21
Automatic Transmission . 2-21
Steering . 2-21
Suspension . 2-21
Tires . 2-21
Wheel Alignment . 2-22
Brakes . 2-22
Air Conditioning . 2-22
Electrical Ratings . 2-23
Body Specifications . 2-24
08/08/21 14:07:13 61SNR030_020_0001
ProCarManuals.com
DYNOMITE -2009-

µµµµ
µµ
µµ
•••
••• µµ
µµ
µµ
µµ
µµ µ
µµ
Brakes
Air Conditioning
Item Measurement QualificationStandard or New Service Limit
Item Measurement Qualification Standard or New
2-19
Parking brake Distance traveled when lever pulled
with 196 N (20 kgf, 44 lbf) of force 8to10clicks
Brake pedal Pedal height (carpet moved aside) M/T 153 mm (6.02 in.) A/T 158 mm (6.22 in.)
Free play 1 5 mm (0.04 0.20 in.)
Brake disc Thickness Front (except TYPE S)22.9 23.1 mm (0.90 0.91 in.) 21.0 mm (0.83 in.)
Front (TYPE S) 24.9 25.1 mm (0.98 0.99 in.) 23.0 mm (0.91 in.)
Rear 8.9 9.1 mm (0.35 0.36 in.) 8.0 mm (0.31 in.)
Runout Front and rear 0.04 mm (0.0016 in.)
Parallelism Front and rear 0.015 mm (0.0006 in.)
Brake pad Thickness Front (except TYPE S)9.6 10.2 mm (0.38 0.40 in.) 1.6 mm (0.06 in.)
Front (TYPE S) 9.0 9.7 mm (0.35 0.38 in.) 1.6 mm (0.06 in.)
Rear 8.3 9.4 mm (0.33 0.37 in.) 1.6 mm (0.06 in.)
Refrigerant Type HFC-134a (R-134a) Capacity of system 400 450 g (14.1 15.8 oz)
Refrigerant oil Type SP-10 (P/N 38897-P13-A01) Capacity of components Condenser 50 mL (1 2/3 fl·oz) Evaporator 40 mL (1 1/3 fl·oz)
Each Line and
hose10 mL (1/3 fl·oz)
Compressor 75 85mL(21/2 25/6fl·oz)
Compressor Field coil resistance At 20 °C (68 °F) 3.15 3.45 Pulley-to-armature-plate clearance 0.35 0.65 mm (0.014 0.026 in.)
08/08/21 14:07:17 61SNR030_020_0019
ProCarManuals.com
DYNOMITE -2009-

µ
µµµ
Item Measurement Qualification Specification
2-22
Design Specifications
WHEEL
ALIGNMENT
Camber Front 0 ° 00 ’
Rear
(without ‘‘C’’ marks
on the rear upper
arm)1°30’
Rear
(with ‘‘C’’ marks on
the rear upper arm) 0° 45 ’
Caster Front 7 ° 00 ’
Total toe-in Front 0 mm (0 in.) Rear 2 mm (0.08 in.)
Front wheel turning angle Inward 38 ° 46 ’ Outward
(reference)31 ° 14 ’
BRAKES Type of service brake Front Power-assisted self-adjusting ventilated disc Rear Power-assisted self-adjusting solid disc
Type of parking brake Mechanical actuating, rear wheels
Pad friction surface area Front (except Type S)48.4 cm (7.50 sq in.) x 2
Front (Type S) 33.8 cm (5.24 sq in.) x 2
Rear 20.6 cm (3.19 sq in.) x 2
AIR
CONDITIONING Compressor Type Scroll
Capacity 77.1 mL (4.7 cu in.)/rev.
Maximum speed 10,000 rpm
Lubricant capacity 75 mL (2 1/2 fl·oz)
Lubricant type SP-10
Condenser Type Corrugated fin
Evaporator Type Corrugated fin
Blower Type Stabilized swirling flow Motor type 220 W/12 V
Speed control Infinitely variable
Maximum capacity 485 m (17.100 cu ft)/h
Temperature control Air-mix type
Compressor clutch Type Dry, single plate, poly V-belt drive Electrical power
consumption at
20 °C (68 °F)42 W maximum at 12 V
Refrigerant Type HFC-134a (R-134a) Capacity 400 450 g (14.1 15.9 oz)
2
2
2
3
08/08/21 14:07:26 61SNR030_020_0022
ProCarManuals.com
DYNOMITE -2009-

µµ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
Item Measurement Qualification Specification
2-23
ELECTRICAL
RATINGS
Battery 12 V 47 Ah/20 HR (12 V 38 Ah/5 HR)
Fuses Under-hood
fuse/relay box
(’06-07 models)100 A, 80 A, 70 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
Under-hood
fuse/relay box
(’08-09 models) 100 A, 70 A, 60 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
Under-dash
fuse/relay box 30 A, 20 A, 15 A, 10 A, 7.5 A
Light bulbs Headlight high beam12 V 60 W (HB3)
Headlight low
beam 12 V 51 W (HB4)
Headlight low
beam (HID) 12 V 35 W (D2R)
Front turn signal
lights 12 V 24/2.2 CP (Amber)
Front side marker
lights 12 V 2 CP
Side turn signal
lights LED
Front parking lights 12 V 3 CP
Front fog lights
(TYPE S, PREMIUM
(’08 model), TECH
PKG) 12 V 55 W (H11)
Rear turn signal
lights 12 V 21 W (Amber)
Rear side marker
lights 12 V 3 CP
Brake/taillights 12 V 21/5 W
Taillights 12 V 5 W
High mount brake
light (except TYPE
S) 12 V 21 W
High mount brake
light (TYPE S) LED
Back-up lights 12 V 16 W
Licenseplatelights 12V 5W
Ceiling light 12 V 8 W
Trunk light 12 V 5 W
Front individual
map lights 12 V 8 W
Gauge lights LED
Indicator lights LED
Ambient light LED
Door courtesy
lights 12 V 3.4 W
Vanity mirror lights 12 V 2 W
Glove box light 12 V 3.4 W
Footwell lights
(TYPE S) LED
Washer reservoir Capacity 4.5 L (4.8 US qt)
08/08/21 14:07:26 61SNR030_020_0023
ProCarManuals.com
DYNOMITE -2009-


(#')
Application Lubricant or Fluid
3-2Lubricants and Fluids
API CERTIFICATION SEAL
For details of the lubrication points and the type of lubricants to be applied, refer to the illustrated index and the various work procedures (such
as Assembly/Reassembly, Replacement, Overhaul, Installation, etc.) contained in each section.


A Engine Acura Motor Oil:
K20Z2: P/N CA66808 (5W-20)
K20Z3: P/N CA66807 (5W-30)
Look for the API certification seal on the oil container. Make sure it says ‘‘For
Gasoline Engines.’’ SAE viscosity: See chart.
B Manual transmission Acura Manual Transmission Fluid (MTF): P/N 08798-9033C Always use Acura MTF. Using motor oil can cause stiffer shifting because it
does not contain the proper additives.
Automatic transmission Acura Automatic Transmission Fluid (ATF-Z1): P/N CA66704 Always use Acura ATF-Z1. Using a non-Acura ATF can affect shift quality.
C
D Brake system (including VSA lines)
Clutch system (manual transmission) Honda DOT 3 Brake Fluid: P/N 08798-9008
Always use Honda DOT 3 Brake Fluid. Using a non-Honda brake fluid can
cause corrosion and decrease the life of the system.
E F
G H I
J
K Brake booster clevis pin
Clutch master cylinder clevis pin (manual
transmission)
Release fork (manual transmission)
Battery terminals
Fuel fill door
Trunk hinges
Hood hinges and hood latch Multipurpose Grease
L
M Shift cable ends (manual transmission)
Caliper piston seal and boot, caliper pins and boots Honda Silicone Grease: P/N 08C30-B0234M
N Air conditioning compressor Compressor Oil: SP-10 (P/N 38897-P13-A01AH) for refrigerant HFC-134a (R-134a)
O Cooling system Honda Long Life Antifreeze/Coolant Type 2: P/N CA66688
08/08/21 14:08:29 61SNR030_030_0002
ProCarManuals.com
DYNOMITE -2009-