A64028
B00084
A76692
A64029
A96566
– ENGINE MECHANICALPARTIAL ENGINE ASSY (1ZZ–FE/3ZZ–FE)(From
February, 2004)14–17
AVENSIS REPAIR MANUAL SUPPLEMENT
(RM1098E)
73. REMOVE WATER INLET
(a) Remove the 2 nuts and water inlet.
74. REMOVE THERMOSTAT
75. REMOVE ENGINE OIL PRESSURE SWITCH ASSY
(See Pub. No. RM1018E on page 17–1)
76. REMOVE CAMSHAFT POSITION SENSOR
(a) Remove the bolt and camshaft position sensor.
77. REMOVE CRANKSHAFT POSITION SENSOR
(a) Remove the 2 bolts and crankshaft position sensor.
78. REMOVE KNOCK SENSOR
(a) Remove the nut and knock sensor.
79. REMOVE V–RIBBED IDLER ASSY NO.1
(a) Remove the nut, bolt, tube and idler.
A64059
A96566
A76692
B00084
A64028
– ENGINE MECHANICALPARTIAL ENGINE ASSY (1ZZ–FE/3ZZ–FE)(From
February, 2004)14–21
AVENSIS REPAIR MANUAL SUPPLEMENT
(RM1098E)
99. INSTALL V–RIBBED BELT TENSIONER ASSY
(a) Install the V–ribbed belt tensioner with the bolt and nut.
Torque:
29 N⋅m (296 kgf⋅cm, 21 ft⋅lbf) for nut
69 N⋅m (704 kgf⋅cm, 51 ft⋅lbf) for bolt
100. INSTALL V–RIBBED IDLER ASSY NO.1
(a) Install the tube and idler with the nut and bolt.
Torque: 39 N⋅m (400 kgf⋅cm, 29 ft⋅lbf)
101. INSTALL KNOCK SENSOR
(See Pub. No. RM1018E on page 10–17)
102. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O–ring on the crank-
shaft position sensor.
(b) Install the crankshaft position sensor with the 2 bolts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
103. INSTALL CAMSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O–ring on the cam-
shaft position sensor.
(b) Install the camshaft position sensor with the bolt.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
104. INSTALL ENGINE OIL PRESSURE SWITCH ASSY
(See Pub. No. RM1018E on page 17–1)
Adhesive: Part No.08833 – 00080, THREE BOND 1344.
105. INSTALL THERMOSTAT
(See Pub. No. RM1018E on page 16–9)
106. INSTALL WATER INLET
(a) Install the water inlet with the 2 nuts.
Torque: 11 N⋅m (112 kgf⋅cm, 8 ft⋅lbf)
