179 Care and maintenance
Safety FirstControls and equipment Tips and Maintenance Technical Data
in the washing water it is advisable to protect the paint with a coat
of hard wax at least twice a year.
K
Polishing
Should only be done if paint has lost its shine and gloss cannot be
brought back with wax. If the polish used does not contain
preservative compounds, the paint must be waxed afterwards.
N No
ot
te
e
Matt painted and plastic parts should not be treated with polish or hard
wax.K
Paint damage
Small marks in the paint such as scratchesor stone damage
should be touched up immediately with paint before the metal
starts to rust.
However, should rust be found at any time it must be removed
thoroughly and then the area treated first with an anti-corrosion
primer and then the correct paint applied.
The number of the original vehicle paint is given on the data
sticker which is inside the boot in the spare wheel housing.
K
Windows
Remove snow and ice from windows and mirrors with a plastic
scraper only. To avoid scratches due to dirt on the glass, the
scraper should only be pushed in one direction and not moved to
and fro.
Traces of rubber, oil, wax
1), grease or silicone can be removed with
a window cleaning solution or a silicone remover.
The windows should also be cleaned on the inside at regular
intervals.
Do not dry the windows with the leather used for the paintwork
because traces of paint cleaner will cause streaks to appear on the
glass, which will hinder vision.
To avoid damaging the heating element wires in the rear window
do not put stickers over the wires on the inside.
K
Door, boot and window seals
The weatherstrips will remain flexible and last longer if they are
rubbed lightly with a rubber protective compound from time to
time. This will also stop the weatherstrips from freezing on in
winter.
K
Door lock cylinder
You should only use an appropriate spray, which has lubricating
and anti-corrosive qualities, to de-ice the lock cylinder.
K
1)This wax residue can only be removed with a special cleaner. Your Technical Service
Centre will provide you with more detailed information.
181 Care and maintenance
Safety FirstControls and equipment Tips and Maintenance Technical Data
Steel wheels
The wheels and the wheel trims should be cleaned thoroughly at
regular intervals when the vehicle is being washed. This will
prevent brake dust, dirt and road salt from accumulating on the
wheel. Persistent ingrained brake dust can be removed with an
industrial grime remover. Paint damage should be repaired before
rust can form.
K
Alloy wheels*
In order to maintain the smart appearance of alloy wheels for a
long period, regular care is necessary. In particular, salt and brake
pad dust must be washed off thoroughly at least every two weeks
otherwise the surface of the alloy will be damaged. After being
washed, the wheels should be treated with an acid-free cleaner for
alloy wheels. About every three months it is necessary to give
wheels a good rubbing with hard wax. Paint polish or other
abrasive solutions must not be used. If the protective paint coat
has been damaged, e.g. by stone impact, the damaged spots
should be dealt with as soon as possible.
Cleaning and anti-corrosion treatment of engine
compartment
The leaves, blossoms etc. which drop into the water box
(underneath the engine bonnet in front of the windscreen) should
be cleaned out occasionally. This will prevent the water drain holes
from becoming blocked and – on vehicles without a dust and
pollen filter – foreign bodies entering the vehicle interior via the
heating and ventilation system.
The engine compartment and the outside surface of the power unit
are given anti-corrosion treatment at the factory.
In the winter when the vehicle is being driven frequently on salted
roads, good anti-corrosion treatment is very important. For this
reason the entire engine compartment and the plenum chamber
should be thoroughly cleaned before and after the salting period
and then preserved so that the salt cannot have a damaging effect.
T Th
he
e iig
gn
ni
it
ti
io
on
n mmu
us
st
t bbe
e ssw
wi
it
tc
ch
he
ed
d oof
ff
f bbe
ef
fo
or
re
e wwa
as
sh
hi
in
ng
g tth
he
e een
ng
gi
in
ne
e.
.
D Do
o nno
ot
t ppo
oi
in
nt
t tth
he
e wwa
at
te
er
r jje
et
t ddi
ir
re
ec
ct
tl
ly
y aat
t tth
he
e hhe
ea
ad
dl
li
ig
gh
ht
ts
s tto
o aav
vo
oi
id
d
d da
am
ma
ag
ge
e.
.
P
Pl
le
ea
as
se
e nno
ot
te
e wwh
he
en
n ccl
le
ea
an
ni
in
ng
g tth
he
e wwh
he
ee
el
ls
s tth
ha
at
t dda
am
mp
pn
ne
es
ss
s,
, iic
ce
e aan
nd
d ggr
ri
it
t cca
an
n
h ha
av
ve
e aa nne
eg
ga
at
ti
iv
ve
e eef
ff
fe
ec
ct
t oon
n tth
he
e bbr
ra
ak
ki
in
ng
g ppo
ow
we
er
r.
.
K
W WA
AR
RN
NI
IN
NG
G
•B Be
ef
fo
or
re
e wwo
or
rk
ki
in
ng
g iin
n tth
he
e een
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t,
, rre
ea
ad
d tth
he
e nno
ot
te
es
s iin
n tth
he
e
" "E
En
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t"
" cch
ha
ap
pt
te
er
r.
.
•F
Fo
or
r ssa
af
fe
et
ty
y rre
ea
as
so
on
ns
s ppu
ul
ll
l oou
ut
t iig
gn
ni
it
ti
io
on
n kke
ey
y bbe
ef
fo
or
re
e rre
ea
ac
ch
hi
in
ng
g iin
nt
to
o tth
he
e wwa
at
te
er
r
b bo
ox
x.
. OOt
th
he
er
rw
wi
is
se
e iif
f tth
he
e wwi
in
nd
ds
sc
cr
re
ee
en
n wwi
ip
pe
er
rs
s aar
re
e ssw
wi
it
tc
ch
he
ed
d oon
n uun
ni
in
nt
te
en
nt
ti
io
on
na
al
ll
ly
y
t th
he
e mmo
ov
ve
em
me
en
nt
t oof
f tth
he
e wwi
ip
pe
er
r lli
in
nk
k cco
ou
ul
ld
d cca
au
us
se
e iin
nj
ju
ur
ry
y.
.
W
WA
AR
RN
NI
IN
NG
G
183 Checking and refilling
Safety FirstControls and equipment Tips and Maintenance Technical Data
C
Ch
he
ec
ck
ki
in
ng
g aan
nd
d rre
ef
fi
il
ll
li
in
ng
g
E
En
ng
gi
in
ne
e bbo
on
nn
ne
et
t
Opening the bonnet
T
To
o rre
el
le
ea
as
se
e llo
oc
ck
k
, pull lever on left under instrument panel – the
bonnet springs up out of its lock.
N No
ot
te
e
Before opening the bonnet ensure that the wiper arms are not lifted off the
windscreen. Otherwise damage can occur to the paintwork.
T To
o oop
pe
en
n tth
he
e bbo
on
nn
ne
et
t
, lift slightly and press the safety catch in the
direction of the arrow
⇒fig. 156.
Fig. 155
Fig. 156
ALO-126
AL0-127
185 Checking and refilling
Safety FirstControls and equipment Tips and Maintenance Technical Data
85 kW Petrol engine
Page
1Oil dipstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
2Oil filler opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
3Brake fluid reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
4Battery cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
5Coolant expansion tank . . . . . . . . . . . . . . . . . . . . . . . . . . 189
6Windscreen washer container . . . . . . . . . . . . . . . . . . . . . 197K
Fig. 157
123
6
54
AL0-044
187 Checking and refilling
Safety FirstControls and equipment Tips and Maintenance Technical Data
P
Pe
et
tr
ro
ol
l een
ng
gi
in
ne
e
D Di
ie
es
se
el
l een
ng
gi
in
ne
eM Mo
on
no
o-
-g
gr
ra
ad
de
e ooi
il
l
Mono-grade oils cannot be used throughout the whole year due to
their limited range of viscosity
2).
These oils are only useful in a climate that is constantly very cold or
very warm.
E En
ng
gi
in
ne
e ooi
il
l aad
dd
di
it
ti
iv
ve
es
s
No type of additive should be mixed with the engine oil. The
deterioration caused by these additives is not covered by the
guarantee.
N No
ot
te
e
Before a long trip, we recommend finding an engine oil that conforms to the
corresponding VW specifications and keeping it in the vehicle. In this way
the required oil will be available if needed.
K
D De
en
no
om
mi
in
na
at
ti
io
on
nS
Sp
pe
ec
ci
if
fi
ic
ca
at
ti
io
on
nC
Co
om
mm
me
en
nt
ts
s
A – synthetic oilVW 502 00 /Dated after
VW 500 00 1-97
B –
mineral oilVW 501 01Dated after
1-97
A/B –
multi-grade oilACEA A2 or A3 or Dated after
even API SH/SJ 1-97
D De
en
no
om
mi
in
na
at
ti
io
on
nS
Sp
pe
ec
ci
if
fi
ic
ca
at
ti
io
on
nC
Co
om
mm
me
en
nt
ts
s
A – synthetic oilVW 505 011)Dated after
1-97
B –
mineral oilVW 505 00Dated after
1-97
A/B –
multi-grade oilACEA A2 or A3 or Dated after
even API CD/CF 1-97
1)Diesel engines that have fuel injection based on a fuel injector pump should use only
oil specification VW 505 01. Avoid the use of any other oil type than VW 505 01 for this
engine. Warning! Possible engine damage!
2)Viscosity: Oil density
189 Checking and refilling
Safety FirstControls and equipment Tips and Maintenance Technical Data
Changing engine oil
T
Th
he
e een
ng
gi
in
ne
e ooi
il
l mmu
us
st
t bbe
e cch
ha
an
ng
ge
ed
d aat
t tth
he
e iin
nt
te
er
rv
va
al
ls
s ggi
iv
ve
en
n iin
n tth
he
e
I In
ns
sp
pe
ec
ct
ti
io
on
n aan
nd
d MMa
ai
in
nt
te
en
na
an
nc
ce
e PPl
la
an
n.
. WWe
e tth
he
er
re
ef
fo
or
re
e rre
ec
co
om
mm
me
en
nd
d tth
ha
at
t
t th
he
e ooi
il
l cch
ha
an
ng
ge
e bbe
e ddo
on
ne
e bby
y aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e.
.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
On no account should oil be poured down drains or into the earth. Because
of the disposal problems, the necessary special tools and specialist
knowledge required the engine oil and filter changing should preferably be
done by a Technical Service Center.
C Ca
au
ut
ti
io
on
n
No additives should be mixed with the engine oil.K
C
Co
oo
ol
li
in
ng
g ssy
ys
st
te
em
m
Coolant specifications
The cooling system is filled at the factory with a permanent coolant
which is not changed. The coolant consists of water and a 40%
concentration of our coolant additive
G G1
12
2+
+(glycol-based anti-
freeze with anti-corrosion additives). This mixture not only gives
the necessary frost protection down to –25 °C but also protects the
alloy parts in the cooling system against corrosion. In addition it
prevents scaling and significantly raises the boiling point of the
coolant.
The concentration of the coolant therefore must not be reduced in
the summer or in warm countries, by topping up with plain water.
T Th
he
e cco
oo
ol
la
an
nt
t aad
dd
di
it
ti
iv
ve
e ppr
ro
op
po
or
rt
ti
io
on
n mmu
us
st
t bbe
e aat
t lle
ea
as
st
t 440
0%
%.
.
If greater protection against frost is required, the proportion of
G G1
12
2+
+
additive can be increased, buto on
nl
ly
y uup
p tto
o 660
0%
%
(frost
protection to approx. –40 °C), otherwise the anti-freeze protection
is reduced and furthermore the cooling effect is impaired.
Vehicles for export to cold countries (e.g. Sweden, Norway, Finland)
usually have frost protection down to –35 °C (50% G G1
12
2+
+
)
approximately.
O Ot
th
he
er
r aad
dd
di
it
ti
iv
ve
es
s cca
an
n bbe
e vve
er
ry
y dde
et
tr
ri
im
me
en
nt
ta
al
l tto
o tth
he
e aan
nt
ti
i-
-c
co
or
rr
ro
os
si
io
on
n eef
ff
fe
ec
ct
t
i in
n ppa
ar
rt
ti
ic
cu
ul
la
ar
r.
.
T Th
he
e ssu
ub
bs
se
eq
qu
ue
en
nt
t cco
or
rr
ro
os
si
io
on
n dda
am
ma
ag
ge
e cca
an
n lle
ea
ad
d tto
o cco
oo
ol
la
an
nt
t llo
os
ss
s
r re
es
su
ul
lt
ti
in
ng
g iin
n mma
aj
jo
or
r een
ng
gi
in
ne
e dda
am
ma
ag
ge
e.
.
I If
f yyo
ou
u wwa
an
nt
t tto
o cch
ha
an
ng
ge
e tth
he
e een
ng
gi
in
ne
e ooi
il
l yyo
ou
ur
rs
se
el
lf
f,
, yyo
ou
u mmu
us
st
t nno
ot
te
e tth
he
e ffo
ol
ll
lo
ow
wi
in
ng
g
p po
oi
in
nt
ts
s:
:
•A
Al
ll
lo
ow
w tth
he
e een
ng
gi
in
ne
e tto
o cco
oo
ol
l ddo
ow
wn
n ffi
ir
rs
st
t tto
o aav
vo
oi
id
d tth
he
e dda
an
ng
ge
er
r oof
f bbe
ei
in
ng
g ssc
ca
al
ld
de
ed
d
b by
y hho
ot
t een
ng
gi
in
ne
e ooi
il
l.
.
•U
Us
se
e aan
n aap
pp
pr
ro
op
pr
ri
ia
at
te
e cco
on
nt
ta
ai
in
ne
er
r tto
o ddr
ra
ai
in
n oof
ff
f tth
he
e ooi
il
l.
. IIt
t ssh
ho
ou
ul
ld
d bbe
e bbi
ig
g een
no
ou
ug
gh
h
t to
o hho
ol
ld
d tth
he
e qqu
ua
an
nt
ti
it
ty
y oof
f ooi
il
l iin
n yyo
ou
ur
r een
ng
gi
in
ne
e.
.
•W
We
ea
ar
r ppr
ro
ot
te
ec
ct
ti
iv
ve
e ggl
la
as
ss
se
es
s ffo
or
r yyo
ou
ur
r eey
ye
es
s.
.
•W
Wh
he
en
n rre
em
mo
ov
vi
in
ng
g tth
he
e ooi
il
l ddr
ra
ai
in
n ppl
lu
ug
g wwi
it
th
h yyo
ou
ur
r ffi
in
ng
ge
er
rs
s,
, kke
ee
ep
p yyo
ou
ur
r aar
rm
m
h ho
or
ri
iz
zo
on
nt
ta
al
l sso
o tth
ha
at
t tth
he
e ooi
il
l bbe
ei
in
ng
g ddr
ra
ai
in
ne
ed
d cca
an
nn
no
ot
t rru
un
n ddo
ow
wn
n yyo
ou
ur
r aar
rm
m.
.
•I
If
f yyo
ou
ur
r hha
an
nd
ds
s cco
om
me
e iin
nt
to
o cco
on
nt
ta
ac
ct
t wwi
it
th
h een
ng
gi
in
ne
e ooi
il
l yyo
ou
u mmu
us
st
t wwa
as
sh
h tth
he
em
m
t th
ho
or
ro
ou
ug
gh
hl
ly
y aaf
ft
te
er
rw
wa
ar
rd
ds
s.
.
•O
Ol
ld
d ooi
il
l mmu
us
st
t bbe
e sst
to
or
re
ed
d oou
ut
t oof
f rre
ea
ac
ch
h oof
f cch
hi
il
ld
dr
re
en
n uun
nt
ti
il
l iit
t iis
s ddi
is
sp
po
os
se
ed
d oof
f iin
n
t th
he
e cco
or
rr
re
ec
ct
t mma
an
nn
ne
er
r.
.
W
WA
AR
RN
NI
IN
NG
G
191 Checking and refilling
Safety FirstControls and equipment Tips and Maintenance Technical Data
If a lot of coolant has been lost, only add cold coolant after the
engine has cooled down. This will prevent engine damage.
D Do
o nno
ot
t ffi
il
ll
l aab
bo
ov
ve
e tth
he
e mma
ax
x mma
ar
rk
k.
.
The excess coolant will be forced out through the pressure relief
valve in the cap when engine becomes hot.
S Sc
cr
re
ew
w cca
ap
p oon
n aag
ga
ai
in
n tti
ig
gh
ht
tl
ly
y.
.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Drained coolant should not normally be reused, it must be disposed of,
bearing in mind environmental protection regulations.K
Radiator fan
The radiator fan is driven electrically and controlled by a
thermoswitch from the coolant temperature (also from the engine
compartment temperature on some models).
Brake fluid
The brake fluid reservoir is on the left hand side of the engine
compartment.
On vehicles with ABS* the reservoir is in the same place but its
design is different.
N No
ot
te
e
On vehicles with right-hand drive the reservoir is on the other side of the
engine compartment.K
T Th
he
e cco
oo
ol
la
an
nt
t aad
dd
di
it
ti
iv
ve
e aan
nd
d tth
he
e cco
oo
ol
la
an
nt
t aar
re
e aa dda
an
ng
ge
er
r tto
o hhe
ea
al
lt
th
h.
.
T Th
he
e aad
dd
di
it
ti
iv
ve
e mmu
us
st
t tth
he
er
re
ef
fo
or
re
e oon
nl
ly
y bbe
e sst
to
or
re
ed
d iin
n tth
he
e oor
ri
ig
gi
in
na
al
l cco
on
nt
ta
ai
in
ne
er
r wwe
el
ll
l oou
ut
t
o of
f rre
ea
ac
ch
h oof
f cch
hi
il
ld
dr
re
en
n.
. IIf
f tth
he
e cco
oo
ol
la
an
nt
t hha
as
s tto
o bbe
e ddr
ra
ai
in
ne
ed
d aat
t aan
ny
y tti
im
me
e iit
t mmu
us
st
t bbe
e
c ca
au
ug
gh
ht
t aan
nd
d aal
ls
so
o sst
to
or
re
ed
d iin
n aa ssa
af
fe
e ppl
la
ac
ce
e.
.
W
WA
AR
RN
NI
IN
NG
G
A Af
ft
te
er
r tth
he
e een
ng
gi
in
ne
e hha
as
s bbe
ee
en
n sst
to
op
pp
pe
ed
d tth
he
e ffa
an
n cca
an
n cco
on
nt
ti
in
nu
ue
e rru
un
nn
ni
in
ng
g ffo
or
r aa
w wh
hi
il
le
e –– eev
ve
en
n wwi
it
th
h tth
he
e een
ng
gi
in
ne
e ssw
wi
it
tc
ch
he
ed
d oof
ff
f –– ((u
up
p tto
o aab
bo
ou
ut
t 110
0 mmi
in
nu
ut
te
es
s)
).
. IIt
t
c ca
an
n aal
ls
so
o sst
ta
ar
rt
t tto
o rru
un
n aag
ga
ai
in
n ssu
ud
dd
de
en
nl
ly
y aaf
ft
te
er
r aa ssh
ho
or
rt
t tti
im
me
e iif
f
– – tth
he
e cco
oo
ol
la
an
nt
t tte
em
mp
pe
er
ra
at
tu
ur
re
e iin
nc
cr
re
ea
as
se
es
s ddu
ue
e tto
o hhe
ea
at
t bbu
ui
il
ld
d uup
p
– – wwh
he
en
n tth
he
e een
ng
gi
in
ne
e iis
s hho
ot
t aan
nd
d tth
he
e een
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t iis
s hhe
ea
at
te
ed
d
a ad
dd
di
it
ti
io
on
na
al
ll
ly
y bby
y sst
tr
ro
on
ng
g ssu
un
nl
li
ig
gh
ht
t.
.
S Sp
pe
ec
ci
ia
al
l cca
ar
re
e mmu
us
st
t tth
he
er
re
ef
fo
or
re
e bbe
e tta
ak
ke
en
n wwh
he
en
n wwo
or
rk
ki
in
ng
g iin
n tth
he
e een
ng
gi
in
ne
e
c co
om
mp
pa
ar
rt
tm
me
en
nt
t.
.
K
W WA
AR
RN
NI
IN
NG
G
193 Checking and refilling
Safety FirstControls and equipment Tips and Maintenance Technical Data
F
Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Because of the disposal problems, the special tools necessary and the
specialist knowledge required, brake fluid should preferably be changed at
a Technical Service Centre.
It is advisable to have the fluid change done during an Inspection
Service.
K
B Ba
at
tt
te
er
ry
y
Warnings on handling the battery
Wear eye protection
Battery acid is very corrosive and caustic. Wear
protective gloves and eye protection!
Fires, sparks, naked lights and smoking are
prohibited!
A highly explosive mixture of gases is given off when
the battery is under charge.
Keep children away from acid and batteries!
• • WWe
ea
ar
r eey
ye
e ppr
ro
ot
te
ec
ct
ti
io
on
n.
. DDo
o nno
ot
t aal
ll
lo
ow
w ppa
ar
rt
ti
ic
cl
le
es
s cco
on
nt
ta
ai
in
ni
in
ng
g aac
ci
id
d oor
r lle
ea
ad
d tto
o
c co
om
me
e iin
nt
to
o cco
on
nt
ta
ac
ct
t wwi
it
th
h tth
he
e eey
ye
es
s,
, ssk
ki
in
n oor
r ccl
lo
ot
th
he
es
s.
.
• • BBa
at
tt
te
er
ry
y aac
ci
id
d iis
s hhi
ig
gh
hl
ly
y cca
au
us
st
ti
ic
c.
. AAl
lw
wa
ay
ys
s wwe
ea
ar
r ppr
ro
ot
te
ec
ct
ti
iv
ve
e ggl
lo
ov
ve
es
s aan
nd
d ggl
la
as
ss
se
es
s.
.
D Do
o nno
ot
t tti
ip
p bba
at
tt
te
er
ry
y –– aac
ci
id
d cca
an
n ssp
pi
il
ll
l oou
ut
t oof
f tth
he
e vve
en
nt
ts
s.
.
S Sh
ho
ou
ul
ld
d aac
ci
id
d cco
om
me
e iin
nt
to
o cco
on
nt
ta
ac
ct
t wwi
it
th
h tth
he
e eey
ye
es
s,
, rri
in
ns
se
e ffo
or
r sse
ev
ve
er
ra
al
l mmi
in
nu
ut
te
es
s
u us
si
in
ng
g ccl
le
ea
an
n rru
un
nn
ni
in
ng
gw
wa
at
te
er
r.
. SSe
ee
ek
k mme
ed
di
ic
ca
al
l aas
ss
si
is
st
ta
an
nc
ce
e iim
mm
me
ed
di
ia
at
te
el
ly
y.
. SSh
ho
ou
ul
ld
d
a ac
ci
id
d cco
om
me
e iin
nt
to
o cco
on
nt
ta
ac
ct
t wwi
it
th
h ssk
ki
in
n oor
r ccl
lo
ot
th
he
es
s,
, nne
eu
ut
tr
ra
al
li
is
se
e iim
mm
me
ed
di
ia
at
te
el
ly
y uus
si
in
ng
g
a an
n aal
lk
ka
al
li
in
ne
e sso
oa
ap
p sso
ol
lu
ut
ti
io
on
n aan
nd
d rri
in
ns
se
e tth
hr
ro
ou
ug
gh
hl
ly
y.
. SSh
ho
ou
ul
ld
d aac
ci
id
d iin
na
ad
dv
ve
er
rt
te
en
nt
tl
ly
y bbe
e
d dr
ru
un
nk
k,
, sse
ee
ek
k mme
ed
di
ic
ca
al
l aat
tt
te
en
nt
ti
io
on
n iim
mm
me
ed
di
ia
at
te
el
ly
y.
.
• • KKe
ee
ep
p wwe
el
ll
l ccl
le
ea
ar
r oof
f nna
ak
ke
ed
d ffl
la
am
me
e aan
nd
d ssp
pa
ar
rk
ks
s.
. DDo
o nno
ot
t ssm
mo
ok
ke
e.
. AAv
vo
oi
id
d
g ge
en
ne
er
ra
at
ti
in
ng
g ssp
pa
ar
rk
ks
s wwh
he
en
n hha
an
nd
dl
li
in
ng
g cca
ab
bl
le
es
s aan
nd
d eel
le
ec
ct
tr
ri
ic
ca
al
l cco
om
mp
po
on
ne
en
nt
ts
s.
.
A Av
vo
oi
id
d ssh
ho
or
rt
t cci
ir
rc
cu
ui
it
ts
s.
. NNe
ev
ve
er
r ssh
ho
or
rt
t bba
at
tt
te
er
ry
y tte
er
rm
mi
in
na
al
ls
s –– dda
an
ng
ge
er
r oof
f iin
nj
ju
ur
ry
y ffr
ro
om
m
h hi
ig
gh
h een
ne
er
rg
gy
y ssp
pa
ar
rk
ks
s.
.
• • WWh
he
en
n bba
at
tt
te
er
ry
y iis
s bbe
ei
in
ng
g cch
ha
ar
rg
ge
ed
d,
, aa hhi
ig
gh
hl
ly
y eex
xp
pl
lo
os
si
iv
ve
e mmi
ix
xt
tu
ur
re
e oof
f gga
as
ss
se
es
s iis
s
p pr
ro
od
du
uc
ce
ed
d.
.
• • KKe
ee
ep
p aac
ci
id
d aan
nd
d bba
at
tt
te
er
ry
y oou
ut
t oof
f tth
he
e rre
ea
ac
ch
h oof
f cch
hi
il
ld
dr
re
en
n.
.
• • DDi
is
sc
co
on
nn
ne
ec
ct
t ppo
os
si
it
ti
iv
ve
e tte
er
rm
mi
in
na
al
l oof
f bba
at
tt
te
er
ry
y bbe
ef
fo
or
re
e ddo
oi
in
ng
g aan
ny
y wwo
or
rk
k oon
n tth
he
e
e el
le
ec
ct
tr
ri
ic
ca
al
l ssy
ys
st
te
em
m.
. WWh
he
en
n cch
ha
an
ng
gi
in
ng
g bbu
ul
lb
bs
s iit
t iis
s ssu
uf
ff
fi
ic
ci
ie
en
nt
t tto
o ssw
wi
it
tc
ch
h tth
he
e lla
am
mp
ps
s
o of
ff
f.
.
• • WWh
he
en
n ddi
is
sc
co
on
nn
ne
ec
ct
ti
in
ng
g tth
he
e bba
at
tt
te
er
ry
y ffr
ro
om
m tth
he
e vve
eh
hi
ic
cl
le
e eel
le
ec
ct
tr
ri
ic
ca
al
l ssy
ys
st
te
em
m ffi
ir
rs
st
t
d di
is
sc
co
on
nn
ne
ec
ct
t tth
he
e nne
eg
ga
at
ti
iv
ve
e cca
ab
bl
le
e aan
nd
d tth
he
en
n tth
he
e ppo
os
si
it
ti
iv
ve
e cca
ab
bl
le
e.
.
T Th
he
e bba
at
tt
te
er
ry
y mmu
us
st
t nno
ot
t bbe
e ddi
is
sc
co
on
nn
ne
ec
ct
te
ed
d wwi
it
th
h tth
he
e een
ng
gi
in
ne
e rru
un
nn
ni
in
ng
g,
, aas
s tth
hi
is
s wwi
il
ll
l
d da
am
ma
ag
ge
e tth
he
e eel
le
ec
ct
tr
ri
ic
ca
al
l ssy
ys
st
te
em
m ((e
el
le
ec
ct
tr
ro
on
ni
ic
c cco
om
mp
po
on
ne
en
nt
ts
s)
).
.
• • WWh
he
en
n rre
ec
co
on
nn
ne
ec
ct
ti
in
ng
g tth
he
e bba
at
tt
te
er
ry
y,
, ffi
ir
rs
st
t cco
on
nn
ne
ec
ct
t tth
he
e ppo
os
si
it
ti
iv
ve
e cca
ab
bl
le
e,
, tth
he
en
n tth
he
e
n ne
eg
ga
at
ti
iv
ve
e.
. OOn
n nno
o aac
co
ou
un
nt
t mma
ay
y tth
he
e cca
ab
bl
le
e bbe
e iin
nt
te
er
rc
ch
ha
an
ng
ge
ed
d.
. RRi
is
sk
k oof
f cca
ab
bl
le
es
s
b bu
ur
rn
ni
in
ng
g!
!
W
WA
AR
RN
NI
IN
NG
G