2005 Seat Alhambra technical data

Driving151
Safety FirstControls and equipment Tips and Maintenance Technical Data
F Fo
or
r aal
ll
l vve
eh
hi
ic
cl
le
es
s:
:
• • PPo
os
si
it
ti
io
on
n
1
To lock the steering wheel withdraw the key and turn the wheel
until you hear the pin engage.
In vehicles with automatic gearbox the key can only be turned to
position
1and withdrawn when the selector lever is in the “P P
”
position.
• P Po
os
si
it
ti
io
on
n
2
If the key is difficult to turn in the lock, move the steering wheel
until the key turns freely.
• • PPo
os
si
it
ti
io
on
n
3
Before the starter can be operated a second time the key must be
turned back to position 1. This prevents the starter motor from
engaging while the engine is running, as this could damage the
starter.
K
Ignition key lock*
On vehicles with an automatic gearbox* after switching off the
ignition the ignition key can only be withdrawn if the selector lever
is in the “P P
” position.When the ignition key has been withdrawn the selector lever is
locked in this position.
K
S St
ta
ar
rt
ti
in
ng
g tth
he
e een
ng
gi
in
ne
e
General notes
• Before starting, move gear lever to neutral (with automatic
gearbox, selector lever in “P P
” or “N N
” position) and apply handbrake
firmly.
• On vehicles with a manual gearbox depress the clutch pedal
when operating starter so that starter only has to turn engine.
• As soon as engine starts, release the ignition key so that starter
can disengage.
• After starting a cold engine it may sound noisy for a moment or
two because the oil pressure has to build up in the hydraulic
tappets first. This is normal and no cause for alarm.

O On
n vve
eh
hi
ic
cl
le
es
s wwi
it
th
h mma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x,
, nne
ev
ve
er
r rre
em
mo
ov
ve
e tth
he
e kke
ey
y ffr
ro
om
m tth
he
e sst
te
ee
er
ri
in
ng
g
l lo
oc
ck
k wwh
hi
il
le
e tth
he
e vve
eh
hi
ic
cl
le
e iis
s mmo
ov
vi
in
ng
g.
. OOt
th
he
er
rw
wi
is
se
e tth
he
e sst
te
ee
er
ri
in
ng
g wwh
he
ee
el
l mma
ay
y llo
oc
ck
k
u un
ne
ex
xp
pe
ec
ct
te
ed
dl
ly
y.
.
W
WA
AR
RN
NI
IN
NG
G
W Wh
he
en
n rru
un
nn
ni
in
ng
g tth
he
e een
ng
gi
in
ne
e iin
n cco
on
nf
fi
in
ne
ed
d ssp
pa
ac
ce
es
s tth
he
er
re
e iis
s aa dda
an
ng
ge
er
r oof
f
p po
oi
is
so
on
ni
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G

Driving153
Safety FirstControls and equipment Tips and Maintenance Technical Data
If the engine does not start, switch the glow plugs on again and try
starting it again as described.
S St
ta
ar
rt
ti
in
ng
g aa wwa
ar
rm
m een
ng
gi
in
ne
e
The glow plug lamp does not come on – the engine can be started
straight away.
K
Starting after running out of fuel
If the tank on vehicles with a diesel engine was empty, starting
after filling with diesel fuel can take longer than normal – up to
one minute. This is because the fuel system must first be freed of
air before starting.
K
S St
to
op
pp
pi
in
ng
g tth
he
e een
ng
gi
in
ne
e
Valid for all engines
C
Ca
au
ut
ti
io
on
n
When the engine has been subjected to a heavy engine load for a long
time, the engine must not be switched off abruptly. Let it idle for about 2
minutes to avoid overheating.
Valid for all versions with catalytic converter*
C Ca
au
ut
ti
io
on
n
Do not switch off the ignition while the vehicle is in motion with a gear
engaged; otherwise unburned fuel may go into the converter, where it
would burn and cause overheating, which would damage the converter.
K
A Af
ft
te
er
r tth
he
e een
ng
gi
in
ne
e hha
as
s bbe
ee
en
n sst
to
op
pp
pe
ed
d tth
he
e ffa
an
n cca
an
n cco
on
nt
ti
in
nu
ue
e rru
un
nn
ni
in
ng
g ffo
or
r aa wwh
hi
il
le
e
( (u
up
p tto
o aab
bo
ou
ut
t 110
0 mmi
in
nu
ut
te
es
s)
) wwi
it
th
h tth
he
e iig
gn
ni
it
ti
io
on
n ssw
wi
it
tc
ch
he
ed
d oof
ff
f.
. IIt
t cca
an
n aal
ls
so
o sst
ta
ar
rt
t tto
o
r ru
un
n aag
ga
ai
in
n ssu
ud
dd
de
en
nl
ly
y aaf
ft
te
er
r aa ssh
ho
or
rt
t tti
im
me
e iif
f
– – tth
he
e cco
oo
ol
la
an
nt
t tte
em
mp
pe
er
ra
at
tu
ur
re
e iin
nc
cr
re
ea
as
se
es
s ddu
ue
e tto
o hhe
ea
at
t bbu
ui
il
ld
d-
-u
up
p
– – wwh
he
en
n tth
he
e een
ng
gi
in
ne
e iis
s hho
ot
t aan
nd
d tth
he
e een
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t iis
s hhe
ea
at
te
ed
d
a ad
dd
di
it
ti
io
on
na
al
ll
ly
y bby
y sst
tr
ro
on
ng
g ssu
un
nl
li
ig
gh
ht
t.
.
S Sp
pe
ec
ci
ia
al
l cca
ar
re
e mmu
us
st
t tth
he
er
re
ef
fo
or
re
e bbe
e tta
ak
ke
en
n wwh
he
en
n wwo
or
rk
ki
in
ng
g iin
n tth
he
e een
ng
gi
in
ne
e
c co
om
mp
pa
ar
rt
tm
me
en
nt
t.
.
K
W WA
AR
RN
NI
IN
NG
G

Driving155
Safety FirstControls and equipment Tips and Maintenance Technical Data
This however, is not the case when the stored speed is exceeded
by more than 10 km/h for a period of more than 5 minutes. The
speed must then be stored again.
Altering stored speed
R Re
ed
du
uc
ci
in
ng
g/
/s
se
et
tt
ti
in
ng
g
The stored speed can be reduced by pressing button
⇒ fig. 147B.
By pressing button
⇒ fig. 147Bbriefly, the stored speed is
reduced by a preset amount. If you pres and hold the button, the
speed will decrease through automatic deceleration. The speed
reached when reducing the button will be stored.
If the button is released at a speed of less than approx. 30 km/h,
the memory is deleted. The speed must then, if necessary, be reset
using button
⇒ fig. 147Bafter the vehicle has accelerated to a
speed higher than approx. 30 km/h.
A Ac
cc
ce
el
le
er
ra
at
ti
in
ng
g/
/s
st
to
or
ri
in
ng
g
The stored speed can be increased without depressing the
accelerator by moving the slide control
⇒ fig. 147Ato R RE
ES
S
.
By briefly pressing the slide control, the speed is increased by a
preset amount. If the switch is moved to the left and held, thespeed is increased through automatic acceleration. The speed
reached when the switch is released is then saved.
K
Switching system off temporarily
V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h mma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x:
:
T Th
he
e ssy
ys
st
te
em
m iis
s tte
em
mp
po
or
ra
ar
ri
il
ly
y ssw
wi
it
tc
ch
he
ed
d oof
ff
f
when the brake or clutch
pedals are used or when the switch
Ais moved to OFF (not
engaged).
The speed stored at this time will remain in the memory.
To r re
es
su
um
me
e
the previously stored speed push switch
Afully to the
left after the brake or clutch pedals are released.
T Th
he
e ppr
ro
og
gr
ra
am
mm
me
ed
d ssp
pe
ee
ed
d mmu
us
st
t oon
nl
ly
y bbe
e rre
es
su
um
me
ed
d wwh
he
en
n iit
t iis
s nno
ot
t tto
oo
o hhi
ig
gh
h ffo
or
r
t th
he
e eex
xi
is
st
ti
in
ng
g ttr
ra
af
ff
fi
ic
c cco
on
nd
di
it
ti
io
on
ns
s!
!
K
W WA
AR
RN
NI
IN
NG
G
BA
B8L-068Fig. 148

157 Refuelling
Safety FirstControls and equipment Tips and Maintenance Technical Data
T
Ti
ip
ps
s aan
nd
d MMa
ai
in
nt
te
en
na
an
nc
ce
e
R
Re
ef
fu
ue
el
ll
li
in
ng
g
F
Fi
il
ll
li
in
ng
g tth
he
e tta
an
nk
k
General notes
The filler neck is on the rear right side panel of the vehicle.
The tank flap is automatically locked and unlocked with the central
locking. If the central locking system is defective the flap can be
opened by hand – see next page.
The tank holds about 70 litres.When tank cap has been taken off it can be placed on the tank flap
⇒ fig. 149.
Filling the tank without problem depends largely on the correct
operation of the petrol pump:
• Do not place the nozzle too deeply into the filler neck and do not
place the nozzle at an angle.
• Do not select a high flow rate – the fuel (particularly Diesel) will
otherwise foam up. This could cause the petrol pump to switch off
prematurely.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
As soon as the correctly operated automatic nozzle switches off for the first
time, the tank is full. Do not try then to put more fuel in because the
expansion space in tank will be filled – the fuel can then overflow when it
becomes warm.
After filling tank, screw cap on tightly and lock it.
N No
ot
te
e
Any fuel spillage should be wiped off the paint finish immediately, as the
paint could otherwise be damaged, especially if it is RME (“biodiesel”) fuel.
Fig. 149

AL0-042

158Refuelling
C
Ca
au
ut
ti
io
on
n
On vehicles with a catalytic converter, never drive until the fueltank is
completely empty. The irregular fuel supply can cause misfiring. This allows
unburnt fuel into the exhaust system, which can cause overheating and
damage to the catalyst.
K
Releasing tank flap manually
If the central locking system should fail, the flap can be released
manually:
• Open tailgate and – if fitted – fold back the right luggage
compartment trim from side panel.
• Then push the locking rod in front of the white diaphragm
housing backward slightly in direction of arrow
⇒fig. 150.K
P
Pe
et
tr
ro
ol
l
In the chapter “Technical Data” and on the inside of the tank flap
you will find information on the correct octane rating for your
engine.
K
General notes
•Unleaded petrol must comply with DIN EN1)228 and leaded
petrol with DIN 51 600.
•If, in an emergency, the octane rating of the available petrol is
lower than that required by the engine, only drive with medium
engine speeds and low engine loading. H Hi
ig
gh
h een
ng
gi
in
ne
e llo
oa
ad
di
in
ng
g wwi
it
th
h
f fu
ul
ll
l tth
hr
ro
ot
tt
tl
le
e oor
r hhi
ig
gh
h rre
ev
vs
s cca
an
n cca
au
us
se
e een
ng
gi
in
ne
e dda
am
ma
ag
ge
e.
.
Fill tank with
petrol of the correct octane rating as soon as possible.
•Fuel with a higher octane rating than that required by the engine
can be used without limitation. There are, however, no advantages
regarding output and consumption.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Even one tankful of leaded petrol will detract from the efficiency ofthe
catalytic converter.
N No
ot
te
e
See chapter “Filling the tank”.K
1)European norm
B7M-093CFig. 150

159 Refuelling
Safety FirstControls and equipment Tips and Maintenance Technical Data
Petrol additives
The quality of the fuel has a decisive influence upon the running
behavior, performance and service life of the engine. The additives
which are mixed into the petrol are of particular significance. Itis
therefore advisable only to use good q qu
ua
al
li
it
ty
y ppe
et
tr
ro
ol
l cco
on
nt
ta
ai
in
ni
in
ng
g
a ad
dd
di
it
ti
iv
ve
es
s.
.
K
D
Di
ie
es
se
el
l
Diesel
Diesel fuel must correspond to DIN EN1)590.
C
CZ
Z2
2)
)n
no
o llo
ow
we
er
r tth
ha
an
n 449
9.
.K
RME fuel (“diester”)
According to norm DIN 51 6063).
Vehicles with diesel engines can also run on
R RM
ME
E ffu
ue
el
l (Rapeseed
Methyl Ester).
Ask your Technical Service Centre or automobile club where
biodiesel is available.
See chapter "Filling the tank".
K
Properties of RME
•RME is chemically produced from vegetable oil (predominantly
rapeseed oil) in a process whereby the oil is mixed with methanol
and converted, via a catalyst, into RME.
•RME is almost totally sulfur free. The combustion of RME thus
emits practically no sulfur dioxide (SO
2).
•Exhaust gas contains less
– carbon monoxide
– hydrocarbons
– particles (i.e. soot)
than with conventional diesel fuel.
All emission values are lower than legal requirements.
•RME fuel is biodegradable.
•Performance may be slightly lower.
•Fuel consumption may be slightly higher.
•RME can be used in temperatures down to approximately –10 °C.
•Diesel fuel must be added at ambient temperatures of less than
–10 °C to prevent deterioration to the biodiesel. The mixing ratio
of diesel to biodiesel must be approximately 50:50.
I If
f tth
he
e RRM
ME
E rra
at
ti
io
o eex
xc
ce
ee
ed
ds
s 550
0%
%,
, tto
oo
o mmu
uc
ch
h ssm
mo
ok
ke
e mma
ay
y bbe
e ffo
or
rm
me
ed
d.
.
•During the summer months, RME may be mixed with diesel at
any ratio.
K
1)European norm2)Cetan-Zahl (Cetane Number). Measure of diesel fuel ignitability.3)DIN preliminary Norm

161 Intelligent technology
Safety FirstControls and equipment Tips and Maintenance Technical Data
I
In
nt
te
el
ll
li
ig
ge
en
nt
t tte
ec
ch
hn
no
ol
lo
og
gy
y
B
Br
ra
ak
ke
es
s
General notes
• Brake lining wear depends to a large extent on the operating
conditions and style of driving. On vehicles which are used mainly
in town traffic and stop/ start conditions or are driven hard it may
be necessary to have the thickness of the brake linings checked by
a Technical Service Centre in between the intervals given in the
Inspection and Service Schedule.
• Change down in good time when driving downhill, in order to
make use of the engine braking effect. This relieves strain on the
brake system. When the brakes are applied do not keep them on
continuously, apply and release alternately.
K
What can have a negative effect on the brakes?
W We
et
t oor
r ggr
ri
it
tt
te
ed
d rro
oa
ad
d ssu
ur
rf
fa
ac
ce
eO Ov
ve
er
rh
he
ea
at
ti
in
ng
g oof
f tth
he
e bbr
ra
ak
ke
es
s
•U
Un
nd
de
er
r cce
er
rt
ta
ai
in
n cco
on
nd
di
it
ti
io
on
ns
s ee.
.g
g.
. aaf
ft
te
er
r ddr
ri
iv
vi
in
ng
g tth
hr
ro
ou
ug
gh
h wwa
at
te
er
r,
, hhe
ea
av
vy
y rra
ai
in
n ffa
al
ll
ls
s
o or
r aaf
ft
te
er
r tth
he
e vve
eh
hi
ic
cl
le
e hha
as
s bbe
ee
en
n wwa
as
sh
he
ed
d,
, tth
he
e bbr
ra
ak
ke
es
s cco
ou
ul
ld
d sse
et
t iin
n lla
at
te
er
r tth
ha
an
n
n no
or
rm
ma
al
l ddu
ue
e tto
o dda
am
mp
p,
, oor
r iin
n wwi
in
nt
te
er
r –– ffr
ro
oz
ze
en
n,
, bbr
ra
ak
ke
e ddi
is
sc
cs
s aan
nd
d lli
in
ni
in
ng
gs
s –– tth
he
e
b br
ra
ak
ke
es
s mmu
us
st
t ffi
ir
rs
st
t bbe
e ddr
ri
ie
ed
d tth
hr
ro
ou
ug
gh
h cca
ar
re
ef
fu
ul
l bbr
ra
ak
ki
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G
•F Fu
ul
ll
l bbr
ra
ak
ki
in
ng
g ppo
ow
we
er
r mmi
ig
gh
ht
t aal
ls
so
o sse
et
t iin
n lla
at
te
er
r tth
ha
an
n nno
or
rm
ma
al
l eev
ve
en
n wwh
he
en
n ddr
ri
iv
vi
in
ng
g
o on
n ggr
ri
it
tt
te
ed
d rro
oa
ad
ds
s iif
f yyo
ou
u hha
av
ve
e nno
ot
t bbr
ra
ak
ke
ed
d ffo
or
r sso
om
me
e tti
im
me
e –– tth
he
e lla
ay
ye
er
r oof
f ssa
al
lt
t oon
n
t th
he
e bbr
ra
ak
ke
e ddi
is
sk
ks
s aan
nd
d bbr
ra
ak
ke
e lli
in
ni
in
ng
gs
s mmu
us
st
t ffi
ir
rs
st
t bbe
e wwo
or
rn
n ddo
ow
wn
n wwh
hi
il
ls
st
t bbr
ra
ak
ki
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)
• • NNe
ev
ve
er
r lle
et
t tth
he
e bbr
ra
ak
ke
es
s ““r
ru
ub
b”
” bby
y ppr
re
es
ss
si
in
ng
g tth
he
e ppe
ed
da
al
l tto
oo
o lli
ig
gh
ht
tl
ly
y wwh
he
en
n yyo
ou
u ddo
o
n no
ot
t rre
ea
al
ll
ly
y nne
ee
ed
d tto
o bbr
ra
ak
ke
e.
. TTh
hi
is
s cca
au
us
se
es
s tth
he
e bbr
ra
ak
ke
es
s tto
o oov
ve
er
rh
he
ea
at
t,
, lle
ea
ad
ds
s tto
o
l lo
on
ng
ge
er
r bbr
ra
ak
ki
in
ng
g ddi
is
st
ta
an
nc
ce
es
s aan
nd
d tto
o aa hhi
ig
gh
he
er
r lle
ev
ve
el
l oof
f wwe
ea
ar
r.
.
• • BBe
ef
fo
or
re
e sst
ta
ar
rt
ti
in
ng
g oon
n aa llo
on
ng
g sst
tr
re
et
tc
ch
h oof
f rro
oa
ad
d iin
n aa vve
er
ry
y hhi
il
ll
ly
y aar
re
ea
a,
, ppl
le
ea
as
se
e rre
ed
du
uc
ce
e
y yo
ou
ur
r ssp
pe
ee
ed
d,
, cch
ha
an
ng
ge
e tto
o aa llo
ow
we
er
r gge
ea
ar
r ((m
ma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x)
) oor
r cch
ho
oo
os
se
e aa llo
ow
we
er
r
p po
os
si
it
ti
io
on
n ((a
au
ut
to
om
ma
at
ti
ic
c gge
ea
ar
rb
bo
ox
x)
).
. IIn
n tth
hi
is
s wwa
ay
y yyo
ou
u wwi
il
ll
l uus
se
e tth
he
e bbr
ra
ak
ki
in
ng
g ppo
ow
we
er
r oof
f
t th
he
e een
ng
gi
in
ne
e aan
nd
d rre
el
li
ie
ev
ve
e ppr
re
es
ss
su
ur
re
e oon
n tth
he
e bbr
ra
ak
ke
es
s.
.
• • IIf
f aa ffr
ro
on
nt
t ssp
po
oi
il
le
er
r,
, ffu
ul
ll
l ssi
iz
ze
e wwh
he
ee
el
l ttr
ri
im
ms
s eet
tc
c.
.,
, iis
s rre
et
tr
ro
of
fi
it
tt
te
ed
d,
, iit
t iis
s nne
ec
ce
es
ss
sa
ar
ry
y tto
o
e en
ns
su
ur
re
e tth
ha
at
t tth
he
e ffl
lo
ow
w oof
f aai
ir
r tto
o tth
he
e ffr
ro
on
nt
t bbr
ra
ak
ke
es
s iis
s nno
ot
t rre
es
st
tr
ri
ic
ct
te
ed
d –– oot
th
he
er
rw
wi
is
se
e
t th
he
e bbr
ra
ak
ke
es
s cca
an
n oov
ve
er
rh
he
ea
at
t.
.
K
W WA
AR
RN
NI
IN
NG
G

163 Intelligent technology
Safety FirstControls and equipment Tips and Maintenance Technical Data
F
Fo
ou
ur
r-
-w
wh
he
ee
el
l ddr
ri
iv
ve
e*
*
The concept of four-wheel drives
The four-wheel drive vehicles are fitted with a completely
automatic drive on all four wheels.
It automatically distributes the drive power and adapts perfectly to
the driving style and specific surface conditions.
Other important notes
W Wi
in
nt
te
er
r tty
yr
re
es
s
With the four wheel drive, the vehicle’s drive is good in the winter,
even with serial tyres. However, we recommend the use of winter
tyres or all-weather tyreso on
n aal
ll
l ffo
ou
ur
r wwh
he
ee
el
ls
s
to further improve
driving and braking.
S Sn
no
ow
w cch
ha
ai
in
ns
s
Snow chains should also be used on four-wheel drive vehicles
when it is mandatory. For more information on the use of snow
chains
⇒page 211.
R Ri
im
ms
s/
/t
ty
yr
re
e cch
ha
an
ng
ge
e
F Fo
or
r ffo
ou
ur
r-
-w
wh
he
ee
el
l ddr
ri
iv
ve
e vve
er
rs
si
io
on
ns
s,
, aal
ll
l ffo
ou
ur
r wwh
he
ee
el
ls
s mmu
us
st
t hha
av
ve
e tth
he
e ssa
am
me
e
t tr
re
ea
ad
d ssu
ur
rf
fa
ac
ce
e.
.
F Fo
or
r ffu
ur
rt
th
he
er
r iin
nf
fo
or
rm
ma
at
ti
io
on
n
⇒p
pa
ag
ge
e 220
08
8.
.K
T
Th
he
e ddr
ri
iv
vi
in
ng
g sst
ty
yl
le
e aal
lw
wa
ay
ys
s nne
ee
ed
ds
s tto
o bbe
e aad
dj
ju
us
st
te
ed
d tto
o ssu
ui
it
t tth
he
e rro
oa
ad
d ssu
ur
rf
fa
ac
ce
e aan
nd
d
t tr
ra
af
ff
fi
ic
c cco
on
nd
di
it
ti
io
on
ns
s.
. IIn
nc
cr
re
ea
as
se
ed
d ssa
af
fe
et
ty
y ssh
ho
ou
ul
ld
d nno
ot
t een
nc
co
ou
ur
ra
ag
ge
e oon
ne
e tto
o tta
ak
ke
e
u un
nn
ne
ec
ce
es
ss
sa
ar
ry
y rri
is
sk
ks
s.
.
T Th
he
e bbr
ra
ak
ki
in
ng
g cca
ap
pa
ac
ci
it
ty
y iis
s lli
im
mi
it
te
ed
d bby
y tth
he
e aad
dh
he
er
re
en
nc
ce
e oof
f tth
he
e wwh
he
ee
el
ls
s aan
nd
d ddo
oe
es
s
n no
ot
t ddi
if
ff
fe
er
r ffr
ro
om
m aa rre
eg
gu
ul
la
ar
r vve
eh
hi
ic
cl
le
e wwi
it
th
h aa ttw
wo
o-
-w
wh
he
ee
el
l ddr
ri
iv
ve
e.
.
F Fo
or
r tth
hi
is
s rre
ea
as
so
on
n,
, eev
ve
en
n tth
ho
ou
ug
gh
h oon
n ssl
li
ip
pp
pe
er
ry
y ssu
ur
rf
fa
ac
ce
e tth
he
e aac
cc
ce
el
le
er
ra
at
ti
io
on
n iis
s ggo
oo
od
d,
, iit
t
s sh
ho
ou
ul
ld
d nne
ev
ve
er
r iin
nd
du
uc
ce
e oon
ne
e tto
o ddr
ri
iv
ve
e aat
t eex
xc
ce
es
ss
si
iv
ve
e ssp
pe
ee
ed
ds
s.
.
O On
n hhu
um
mi
id
d ssu
ur
rf
fa
ac
ce
es
s kke
ee
ep
p iin
n mmi
in
nd
d tth
ha
at
t tth
he
e ffr
ro
on
nt
t wwh
he
ee
el
ls
s cca
an
n aal
ls
so
o ssu
uf
ff
fe
er
r ffr
ro
om
m
a aq
qu
ua
ap
pl
la
an
ni
in
ng
g iif
f tth
he
e ssp
pe
ee
ed
d iis
s eex
xc
ce
es
ss
si
iv
ve
e.
. AAs
s oop
pp
po
os
se
ed
d tto
o vve
eh
hi
ic
cl
le
es
s wwi
it
th
h ffr
ro
on
nt
t
w wh
he
ee
el
l ddr
ri
iv
ve
e,
, tth
he
e bbe
eg
gi
in
nn
ni
in
ng
g oof
f aaq
qu
ua
ap
pl
la
an
ni
in
ng
g iis
s nno
ot
t aan
nn
no
ou
un
nc
ce
ed
d bby
y aa ssu
ud
dd
de
en
n
i in
nc
cr
re
ea
as
se
e iin
n een
ng
gi
in
ne
e rre
ev
vo
ol
lu
ut
ti
io
on
ns
s.
. WWe
e rre
ec
co
om
mm
me
en
nd
d nno
ot
t tto
o ddr
ri
iv
ve
e aat
t eex
xc
ce
es
ss
si
iv
ve
e
s sp
pe
ee
ed
ds
s aan
nd
d aal
lw
wa
ay
ys
s aad
dj
ju
us
st
t tto
o tth
he
e rro
oa
ad
d cco
on
nd
di
it
ti
io
on
ns
s.
.
K
W WA
AR
RN
NI
IN
NG
G