2005 MERCEDES-BENZ CLK-Class key

52 AudioCD operation
Press a number key, e.g. 2 to select
the corresponding CD.
The CD is changed. The selected CD is
played back.
The message
No CD
will
appear if a selected slot is empty.
In the Magazine menu

Press the
Magaz.
soft key.
The Magazine menu is displayed. If the
magazine has not been read in, the
message
Magazine scan
Please wait
is displayed first.

Push the joystick to g or G to
select a CD.

Press E.
or

Press one of the number keys 1 to
6.
The CD is changed. The message Loading CD
will appear.You can select a track:

with g or h (
page 52)

with the joystick (
page 53)

with the number keypad (
page 53)

with CD track scan (
page 53)
With g or h

Activate the main CD menu
(page 49).
Next track

Press h.
The next track is played.
iThe name of the CD instead of e.g.
CD1

is displayed if the information is
available.
Track select

53 Audio
CD operation
Previous track or start of title (if more
than 10 seconds of playing time has
elapsed)
Press g.
Playback begins.
Select any desired track

Press g or h as often as
necessary.
With the joystick

Push the joystick to g or G to play
the next or previous track.With the number keypad

Activate the CD main menu
(page 50).

Press *.
An input line will appear in the CD main
menu.
1Number of tracks on CD corresponds
with the valid number range
2Input line
E.g.: Track 14.

Press 1 and 4 in short succession.

After entering the track number, wait
approximately 3 seconds.
The selected track is played. The CD
main menu is displayed.
CD track scan
The tracks on a CD can be scanned one
after the other for 8 seconds each. The
function will switch off automatically when
the starting track is reached. You can also
manually stop the scan function.iEntries higher than the number of
tracks available on the CD are not
possible.

54 AudioCD operationActivating
Press the
Scan
soft key.
Scan will begin.Ending the function
Scan search is running.

Press the
Scan
soft key.
or

Press E.
Playback will resume with the desired
track.Fast forward

Press h longer than 2 seconds and
keep it pressed.
Fast reverse

Press g longer than 2 seconds and
keep it pressed.
Ending the function

Release h or g.
Playback will resume.
iWhen you start the scan function, the
playback mode
Normal
sequence

(
page 57) is automatically activated.
Fast forward/reverse

55 Audio
CD operation
On
Press J during playback.
The CD operation is muted and theß
symbol is displayed in the status bar.
The soft keys on the left side are
greyed out in some submenus.
Off

Press J again.
Playback will resume.
The ß disappears from the status bar.
The soft keys on the left side are
selectable again.The following options are available:

Normal sequence (
page 57)

Track mix (
page 57)

CD mix (
page 57)

Repeat track (
page 57)

Repeat CD (
page 57)
Muting
iCOMAND will also deactivate muting if
you
press A to select another audio
source

change the volume

press either g or h.
Playback modeiIf the CD changer* is connected, the
playback modes
Repeat CD
and
CD mix
are available additionally.

56 AudioCD operationActivating playback mode
E.g.:
Mode
Repeat
track


Press the
Setting
soft key.
The setting menu will appear.
CD changer* setting menu

Push the joystick to g or G to
select the playback mode
Repeat
track
.

Press E.
The mode is activated. The CD
changer* main menu will then appear. REPEAT TRACK
will appear in the
status bar.
iThe playback mode
Normal
sequence

is not displayed in the status bar.

58 AudioAUX operation

AUX operation
Open the Audio menu (
page 34).

Press the
AUX
soft key.
The AUX menu is displayed. The exter-
nal audio source is played back if it is
connected and switched to playback.At the COMAND, you can set the following
for the AUX operation:

Volume (
page 27)

Balance control and fader (
page 29)

Bass and treble control (
page 30)

Sound functions* (
page 30)
iAn external audio source can be con-
nected to the COMAND.
For further information please contact
an authorized Mercedes-Benz Center.
iFor instructions on how to operate the
external audio source, please see the
operation manual of the device con-
nected.

61 Satellite radio*
Subscribing

Subscribing

Press B to switch to satellite radio
operation.
The Satellite radio main menu will ap-
pear and displays the
Preview
chan-
nel. You cannnot select any other
station.

Press the
Service
soft key to display
the Service information display.
The Service information display will ap-
pear.
Service information display1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2The Electronical Serial Number (ESN)
of your satellite receiver
Contact satellite radio service provider
at the telephone number displayed in
the screen.After the connection is made:

Follow the instructions given by the
operator.
The activation process may take up to
10 minutes. If it is successful, you will
see the display with the message Acquiring Signal...
(page 62)
followed by the Satellite radio main
menu (
page 62).
Subscribing to satellite radio
iDepending on subscription status, soft
keys may or may not appear on the left
and right side of the service information
display.
iCredit card information may be re-
quired for your application.
The activation process takes up to ap-
proximately 10 minutes.
If a satellite receiver is not installed or
not properly installed:
The message
No Satellite Radio

will appear.

62 Satellite radio*Satellite radio operation

Satellite radio operationSee “Subscribing to satellite radio” for im-
portant subscription information
(page 61).

Press B to switch to satellite radio
operation.
The message will appear at start up or
when the signal is not available.After the COMAND acquires the
signal, the Satellite radio main menu will
appear. The station last tuned to will begin
to play.
Satellite radio main menu1Program category
2Station name
3Memory preset selected if available
and channel numberMuting

Press J while listening to the satel-
lite radio.
The symbol R will appear in the status
bar.

Press J again to resume listening to
the current station.
The symbol R will have disappeared.
Switching oniNo Satellite receiver:
The message
No Satellite Radio

will appear in a window.
iThe
Sound
soft key is available if
COMAND is equipped with a sound
amplifier*.
iYou can display 2 in full:
Station information (
page 66)
iMuting will also be canceled if you
switch to an audio source, e.g. normal
radio, or if you alter the volume.