2005 MERCEDES-BENZ CLK-Class key

110 NavigationDestination inputSelecting a parking lot
The map is displayed and shows the
destination and the available parkings lots.
One of the parking lot is spotlighted. The
name belonging to it is shown on the
status bar.
Use the
Next
or
Prev.
soft key to
select a parking lot on the map.

Press the
Details
soft key to see
more information about the parking lot.

Press E.
The Start route guidance menu will
appear (
page 115).

111 Navigation
Destination input
Selecting a destination using the map
Press c.

Push the joystick to H, h, g, G,
F, f.
or

Press the
Map
soft key, e.g. in the Start
route guidance menu (
page 115).
The map is shown in full view and
cross-hairs appear.
If soft key displays are hidden:

Press any soft key.
The soft key displays will appear.Available soft keys

POIs
soft key:
Spotlight a POI if POIs are on the map
(
page 141).

Memory
soft key:
Set a memory point and saved it in the
Last destinations memory (
page 99).

Display
soft key:
The Map view display will appear.
(
page 128).

Soft key +:
Enlarge visible map section.

Soft key ):
Reduce visible map section.
iThe system automatically places the
cross-hairs on the current destination
address.
ic was pressed:
If no soft key is selected within approx.
8 seconds, the soft key display will
disappear again.
iThe
POIs
, Memory
and
Display
soft
keys are available if the
Map
soft key
was pressed.

112 NavigationDestination input
Push the joystick to H, h, g, G
to move the cross-hairs.

Push the joystick to F or f to move
the cross-hairs diagonally.This allows you to select your destination.

Release the button.
If the system is able to assign a street
name to the selected location, it is
displayed on the status bar.

Press E.
The system uses the point at the center
of the cross-hairs as destination.
The Start route guidance menu will
appear (
page 115).
iIf you press the
Back
soft key, your
selection will be discarded. The system
then uses the data of the previous
destination.
iIf a POI is close to the center of the
cross-hairs, a selection list will appear.
You can now select between a POI and
the address destination.

113 Navigation
Destination input

Activate the Navigation main menu
(page 96).

Press the
Home
soft key.
The message No home address
available! Please enter home
address
will appear.

Press the
Change
soft key to edit a
home address.
or
The actual home address is shown.Here you can use the following
functions

changing to the map (
page 111)

setting the routing mode
(page 98)

editing home address (
page 113)

starting route guidance
(page 115)Editing home address

Press the
Change
soft key.
The Change home address menu will
appear.
You can use the following functions

selecting a destination from the
Destination memory (
page 136)

entering destination address
(page 102)
Selecting home address

118 NavigationRoute guidanceDisplay example 2:
1Current vehicle location and direction
of travel y, remaining route section
2Name of the road you are to turn onto
3Symbol for the next driving maneuver,
distance bar and distance to the next
driving maneuver
4The road you are currently driving onOn the right side of the display, the symbol
for the next driving maneuver is indicated
(here: right turn).
On the very right side next to turn symbol
is the distance bar. It indicates the
distance to the next driving maneuver
(here: 800 ft).
The status bar shows the name of the
street after the driving maneuver, if
available, here:
MAIN ST
The destination is marked with a flag $ on
the map, an intermediate destination is
marked with a flag showing the letter
S.

Press any soft key.
The soft key displays appear.iUsing the control system, the display
unit can be changed between km or
miles (see your vehicle’s Operator’s
Manual). 
When the display unit is set to
miles, the COMAND will indicate
distances in miles (mi) or feet (ft).

When the display unit is set to km,
the COMAND will indicate
distances in kilometers (km) or
meters (m).
iIf no other action is taken within
approx. 8 seconds, the soft key
displays will disappear again.

119 Navigation
Route guidance
Altering the map scale
The current map scale is indicated on the
left side of the status bar.
Press the + or ) soft key.
The map section is zoomed in or
zoomed out. A bar indicating the map
scale appears on the status bar.
Selecting map orientation
A symbol is shown on the bottom left side
of the status bar.

Heading Up
<:
Dynamic map alignment, map is
displayed facing driving direction
pointing up
or

North Up
Y:
Map is displayed facing northYou can select the map orientation
(
page 130).
Changing the map display
While route guidance is active, you can
switch between split view and full view.

Split view:
The map is shown on the left side and
information on the next maneuver on
the right.
or

Full view:
Full view of the map.

Press c.
The display changes with every push of
the button.When you reach the destination, you will
see the destination flag. Route guidance
ends.
iIf GPS display (
page 130) is active,
information on your current position is
shown on the status bar.
Arriving at destination

121 Navigation
During route guidance

During route guidance
During route guidance you can use the soft
keys to activate additional menus and
displays and make settings.
The soft key displays will automatically
disappear after a few seconds.
During route guidance, press any soft
key.
The soft key displays will appear.Available soft keys

Info
soft key:
Brings you to the Info menu
(
page 122).

Detour
soft key:
Brings you to the Traffic Jam function
(
page 123).

Stopovr
soft key:
Brings you to the stopover destination
function (page 125).

POIs
soft key:
Brings you to the POI function
(
page 141).

Memory
soft key:
Brings you to the save current location
function (page 99).

Display
soft key:
Brings you to the Display menu
(
page 128).

Soft key +:
Enlarge visible map section
(page 119).

Soft key ):
Reduce visible map section
(page 119).
Displaying the soft keys

122 NavigationDuring route guidance
Display the soft keys.

Press the
Info
soft key.
The Info menu will appear.
Info menu
Available soft keys
Rte
list
soft key:
Shows a list of the route.

Mode
soft key:
Brings you to the route mode selection
menu (page 98).

Details
soft key:
See all information about the
destination.Displaying the route list

Press the
Rte
list
soft key.
The list of the remaining roads/route
sections appears.
The road currently travelled on is at the
top of the list.

Push the joystick to G or g to scroll
through the list.

Use the
Page
V and
Page
v soft keys
to display the next or previous page.
Info menu
iIf a stopover destination has been
entered:
The estimated time of arrival and the
remaining distance to the stopover
destination are displayed.
When the stopover destination is
reached, the system indicates
estimated time of arrival and remaining
distance to the main destination.
iDepending on the distance to the
destination, it may take a few moments
before the route list is completed.
The list will only be complete when the
route is completely calculated.