2005 LEXUS ES300 emergency towing

Lexus Supports ASE CertificationPage 1 of 9
Title:
PRE-DELIVERY SERVICE (PDS)
INFORMATION FOR ES 330
Models:
'04 ES 330
Technical Service
Information Bulletin
August 26, 2003
PD002-03
The following items need to be performed during Pre±Delivery Service (PDS) on
2004 model year ES 330 vehicles.
2004 model year ES 330 vehicles.
ITEM NO.SUBJECTPAGE
1D.C.C. Fuse Installation During PDS2
2Removal of Front Emergency Towing Eyelet and Installation
of Towing Eyelet Hole Cover (Performed at Port)3
3Front License Plate Mounting Bracket Installation4
4Initialization of Moon Roof5
5Initial Calibration of Compass6
6Installation of Rubber Body Plugs9
OP CODEDESCRIPTIONTIMEOFPT1T2
N/ANot Applicable to Warranty±±±±
PRE±DELIVERY SERVICE
Introduction
Applicable
Vehicles
Contents
Warranty
Information

PRE±DELIVERY SERVICE (PDS) INFORMATION FOR ES 330 ± PD002-03 August 26, 2003
Page 3 of 9
REMOVAL OF FRONT EMERGENCY TOWING EYELET AND INSTALLATION OF
TOWING EYELET HOLE COVER (PERFORMED AT PORT)
1. Remove the emergency towing eyelet
from the front bumper by turning
counterclockwise.
NOTE:
If it is hard to loosen the emergency
towing eyelet, use a steel bar.
2. Place the removed emergency
towing eyelet in the tool tray in the
luggage compartment.
3. Install the front towing eyelet hole
cover which is stored in the glove box
onto the front bumper as shown in
the diagram. ITEM NO. 2:
Emergency Towing Eyelet
Installation
Procedure

Lexus Supports ASE CertificationPage 1 of 2
Title:
FRONT EMERGENCY TOWING EYELET &
EYELET HOLE COVER
Models:
'05 ± '06 ES 330
Technical Service
Information Bulletin
August 26, 2005
PD037-05
The 2005 ± 2006 model year ES 330 is shipped with a front emergency towing eyelet.
Follow the procedure below to remove the eyelet and save for customer use.
2005 ± 2006 model year ES 330 vehicles.
OP CODEDESCRIPTIONTIMEOFPT1T2
N/ANot Applicable to Warranty±±±±
1. Remove the emergency towing
eyelet from the front bumper by
turning counterclockwise.
NOTE:
If it is hard to loosen the emergency
towing eyelet, use a steel bar.
PRE-DELIVERY SERVICE
Introduction
Applicable
Vehicles
Warranty
Information
Emergency Towing Eyelet
Installation
Procedure

FRONT EMERGENCY TOWING EYELET & EYELET HOLE COVER ± PD037-05 August 26, 2005
Page 2 of 2
2. Place the emergency towing
eyelet in the tool tray in the
luggage compartment.
3. Install the front towing eyelet hole
cover, which is stored in the glove
box, onto the front bumper as shown
in the illustration.Installation
Procedure
(Continued)