2005 JEEP WRANGLER Owners Manual

8. Finish unzipping the window and untuck from the
door frame retainer at the front of the window, repeat this
step on the other side.
NOTE:Stow clean windows carefully outside of the
vehicle to avoid scratches.
9. Untuck the sail panels from the rear corners of the
vehicle.
NOTE:If difficulty is experienced with fabric tension,
place your hand on the rear corner of the top and pull
down to help untuck the corners.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113
3

10. Release the Sunrider pins to release the top bows
from the brackets located on both door rails. Push up and
back on the bow slightly so it does not fall back and lock
into the brackets.11. Grasp the side bow behind the header and lift the top
back.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

12. As you begin to lower the top, wrap the sail panels so
that they rest on the roof of the vehicle.13. Make sure the sides of the top are folded inward as
the top continues to fold, and check straps are clear of the
vehicle. Tuck the top between the 2 bow and 2-1/2 bow
and 2-1/2 bow and 3 bow as it folds.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115
3

14. Tuck the top material between the 2 bow and the
header.15. After the top is folded down, ensure that the drip rail
retainers are tucked in inward as shown. This is to avoid
unnecessary wear to the fabric.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

16. After the top is folded down, tuck the check straps
inside the rear corners of the vehicle. This will keep them
from hanging and flapping outside the vehicle.
17. Hook the header latches back onto the header to keep
them from rattling.
Putting Up The Soft Top
NOTE:Be sure the wire harness is not attached to the
soft top bows before you lift the top. Make certain
Sunrider sleeves are covering the Sunrider links.
1. Unhook the header latches from the plastic header.
2. Unclip and move the sun visors to the side.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117
3

3. Begin working from the rear of the vehicle with the
tailgate open. Standing to the side of the vehicle, lift the
top by the 2 bow and 3 bow over the sport bar.
4. Engage the hooks on each side of the header into the
windshield slots and do not fully engage the header
latch. If you close the latches too soon, the top willbecome so tight that it will make many of the remaining
steps difficult or even impossible. That is why locking the
latches will be the last step.
NOTE:Grasp the drip rail retainers on each side and
untrap them from the door frame. Do not tuck the drip
rails into the door frame at this time.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

5. Pull the side bow forward and down. Make certain the
blocks on the side bows line up with the retainers on the
door rails. Lock the blocks in place.
NOTE:Check to make certain the check straps are not
tangled on any of the other top hardware. This will
prevent the top from being put all the way up.6. Move to the rear of the vehicle and gently pull the sail
panels over the 3 bow.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119
3

7. Tuck the sail panel retainer into the bodyside retainer.
Begin working from the rear tailgate opening and work
to the corner.NOTE:This may be difficult due to fabric tension. If
difficulty is experienced with fabric tension, place your
hand on top of the 3 bow and pull down to help tuck in
the sail panels.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE