2005 FIAT STILO Radio Manual

16 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
16
CONTROLS ON STEERING
WHEEL (where provided) fig. 2
The main radio function controls
are repeated on the steering wheel,
to allow easier control.
Volume adjustment
(“+” and “–”) Mute function
(“Mute”)
Press button B(“+”) to increase
volume and (“–”) to decrease vol-
ume as specified in paragraph
VOLUME
ADJUSTMENT
. Function identical to
that of the button/knob 10(VOL
PUSH ON/OFF) set on the radio.Press button C(MUTE) to turn
on/off this function that brings the
volume to zero. When this function
is on the display shows “MUTE”
preceded by the current source (e.g.
“TUNER MUTE” when in radio
mode). If in CDC mode (CD
Changer), the display shows: “CD
PAUSE”.
Select Radio,
Cassette,
CD Changer
(“SRC”)
(SRC= Source = source)
Press repeatedly button A(SRC)
to cyclically select Radio, Cassette,
CD Changer (if the Compact Disc
player is fitted). This button function
is identical to that of the button 14
(SRC) set on the radio.Setting Radio, Cassette,
CD Changer (“+” and “–”)
Button D(<>) implements
three different functions according to
the selected operating mode (Radio,
cassette or CD Changer).
Button functions are identical to
the functions of buttons 6(>>) and
15(<<) set on the radio, as con-
cerns the following functions.
1) Radio function: adjust tuning
Press button D(<>) to select
stations in the required band.
2) Cassette function
Press button D(<>) to for-
ward/rewind the tape.
3) CD Changer function
select CD Changer next/
previous track
Press button D(<>) to play
next/previous track on the Compact
Disc you are listening to according
to modes
SELECT OR REPEAT A TRACK.
fig. 2
F0C0096m
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 16

RADIO WITH CASSETTE PLAYER
17 Nero- Testo 603.46.306 Radio Stilo gb
17
FUNCTIONS AND
ADJUSTMENTS
Switching on
The set is switched on pressing the
button/knob 10(VOL PUSH ON/
OFF). Switching on may be connect-
ed to engine starting: turning the igni-
tion key to MAR, the radio turns on;
turning the ignition key to STOPthe
radio turns off. If the radio was on
before the engine was turned off, it
will turn on again automatically the
next time the engine is started.
If the radio is turned on with the
ignition key at STOP, it will turn off
automatically after about 20 minutes.
Turning the radio off
To turn the radio off press button/
knob 10(VOL PUSH ON/ OFF).
Selecting Radio/Cassette/
CD Changer
Pressing briefly and repeatedly the
14(SRC) button it is possible to
select the following functions in
sequence:
– TUNER (Radio)
– TAPE (Cassette) (only if the cas-
sette is inserted)
– CDC (CD Changer) (only if the
CD Changer is connected).
After each change of the listening
source, the display shows the func-
tion selected: TUNER(Radio),
TAPE(Cassette), CDC(CD
Changer).
The functions that cannot be
selected (e.g. “TAPE” when the cas-
sette is not inserted) are automati-
cally disabled.Pause function
If while listening to a cassette or
Compact Disc another function is
selected (e.g. the radio), playing is
stopped and when the cassette or
Compact Disc mode is resumed, it
starts again from the point in which
it was stopped.
If while listening to the radio anoth-
er function is selected, when the
Radio mode is resumed, it is tuned
to the last station selected.
Volume adjustment
Adjust volume through button/knob
10(VOL PUSH ON/OFF).
Turn the knob rightwards to
increase volume and leftwards to
decrease it.
The display shows “VOLUME 00”
… “VOLUME 12”
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 17

18 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
18
Soft Mute function
When the MUTEfunction is
turned on or off, the volume lowers
or increases gradually (SOFT
MUTEfunction).
Tone adjustment
Proceed as follows:
– briefly (less than 1 second) and
repeatedly press the 11(AUDIO
DSP) button until the display shows
“BASS” , “TREBLE” (select Bass,
Treble function)
– turn button/knob 10(VOL
PUSH ON/OFF) to the right to
increase basses or trebles or to the
left to decrease.
For few seconds the display shows
the levels of the basses/trebles (from
–10 to +10).
After few seconds from the last
adjustment, the display returns to
the main radio screen. Balance adjustment
Proceed as follows:
– briefly (less than 1 second) and
repeatedly press the 11(AUDIO
DSP) button until the display shows
“BALANCE” (select Balancing
function)
– turn button/knob 10(VOL
PUSH ON/OFF) to the right to
increase the sound from the right
speakers and to the left to increase
the sound from the left speakers.
For few seconds the display shows
the levels of balancing from˙+10
to ¯+10 (˙= right, ¯= left). After
few seconds from the last adjust-
ment, the display returns to the main
radio screen. Mute function (turning off
the volume completely)
To switch on the MUTEfunction,
briefly press (less than 1 second) the
button 2(II MUTE). Volume will
gradually lower ( SOFT MUTE
function) and the display will show
the function selected and the word
MUTE(e.g. “TUNER MUTE”
when Radio function is selected).
To switch off the MUTEfunction,
press button 2(II MUTE) briefly
again. Volume will gradually become
louder (SOFT MUTEfunction)
returning to the value set before
switching on the MUTE function.
Turning the button/knob 10(VOL
PUSH ON/OFF), the sound level
changes but the MUTEfunction
stays on. Press again button 2(II
MUTE) to switch it off.
With the MUTE function on, all the
other functions can be used and if a
traffic bulletin arrives with the TA
function on, the message ignores the
MUTEfunction.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 18

RADIO WITH CASSETTE PLAYER
19 Nero- Testo 603.46.306 Radio Stilo gb
19
Equalizer settings
(only if the equalizer is on)
To turn on the equalizer, press but-
ton 11(AUDIO
DSP) and turn but-
ton/knob10(VOL PUSH
ON/OFF) to select one of the fol-
lowing adjustments:
– “PRESET” (preset equalizer
adjustment)
– “CLASSIC” (preset equalizer
adjustment)
– “JAZZ” (preset equalizer adjust-
ment)
– “ROCK” (preset equalizer
adjustment)
– “CUSTOMER” (adjustment of
the 5 equalizer bands that can be
changed by the user)
Press repeatedly the 15 (<<) or 6
(>>) to select the band and use but-
ton/knob10(VOL PUSH
ON/OFF) to increase/reduce level
in the frequency band selected.Fader adjustment
Proceed as follows:
– briefly (less than 1 second) and
repeatedly press the 11(AUDIO
DSP) button until the display shows
“FADE” (select Fader function)
– turn button/knob 10(VOL
PUSH ON/OFF) to the right to
increase the sound from the front
speakers and to the left to increase
the sound from the rear speakers.
After few seconds from the last
adjustment, the display returns to
the main radio screen.Loudness function
The Loudness function improves
the sound volume when listening at
low level, increasing the basses and
trebles. It is cut off when the volume
is set to maximum.
To switch the function on/off, press
briefly (less than 1 second) the 12
(MENU
RDS) button to enter the
MENUand then press the button
for scrolling the menu. The function
condition (on or off) is shown on the
display by “LOUDNESS: ON” or
“LOUDNESS: OFF”, selectable
through buttons 15(<<) or 6(>>).
TELEPHONE PROVISION
If the handsfree kit is installed on
the car, when a phone call is
received, the volume selected for
the PHONEfunction is set in the
menu, and can be cut off if required
(OFF).
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 19

20 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
20
The “FMAST” reception band is
reserved to the stations stored auto-
matically with the AutoSTorefunc-
tion.
The AMband is divided into sec-
tions: MW, LWand AMAST. The
AMASTsection is reserved to the
stations stored automatically with
the AutoSTorefunction.
The radio is always ready to
receive stations in the RDS mode
(Radio Data System).
Presetting buttons
The buttons with symbols from 1
to 6 (“3”, “4”, “5”, “16”, “17, “18”)
make it possible to set the following
presettings:
– 24 in the FM band (6 in FM 1, 6 in
FM 2, 6 in FM 3, 6 in FMAST)
– 6 in the LW band
– 6 in the MW band
– 6 in the AMAST bandTo call a preset station, choose the
required frequency band and then
press briefly (less than 1 second) the
corresponding preset button (from 1
to 6). The display will show the name
and the presetting number.
Storing the last station heard
The radio automatically keeps in
storage the last station heard for
each reception band, which is then
tuned when the radio is turned on or
the reception band is changed. RADIO (Tuner) fig. 1
When the set is turned on the last
function selected before turning off
is played (Radio, Cassette or CD
Changer).
To select the Radio source while
listening to a cassette or Compact
Disc, press briefly (less than 1 sec-
ond) and repeatedly the 14(SRC)
button until this function is selected.
If in the radio source, press briefly
(less than 1 second) and repeatedly
the 13(BAND
AS) button to select
the required reception band.
Every time the button 13 (BAND
AS) is pressed, the following bands
are selected in sequence: “FM1”,
FM2”, “FM3”, “FM4AST”, “LW”,
“MW” and “AMAST”.
The FMband is divided into sec-
tions: FM1, FM2, FM3and
FMAST. The FMASTsection is
reserved to the stations stored auto-
matically with the AutoSTorefunc-
tion.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 20

RADIO WITH CASSETTE PLAYER
21 Nero- Testo 603.46.306 Radio Stilo gb
21
Automatic tuning
Briefly press (less than 1 second)
button 15(<<) or 6(>>) to start
automatically searching the tuning
for the next station that it is possible
to receive in the direction chosen.
If the station on which the tuner
stops is one of the stations stored
with the preset buttons (from 1 to
6), the display will show the preset-
ting number.
Manual tuning
This allows manual station search-
ing in the chosen band. This function
has to be through the MENU.
For manual tuning proceed as fol-
lows:
1.Select the band (or the storing
section) with button13(BAND
AS):
FM1, FM2, FM3, MW or LW.
2. Press briefly (less than 1 second)
and repeatedly button 15(<<) or 6
(>>).Pressing one of the buttons 15
(<<) or 6(>>) longer (over 1 sec-
ond) obtains fast forward searching,
which is stopped when the button is
released.
If the station on which the tuner
stops is one of the stations stored
with the preset buttons (from 1 to
6), the display will show the preset-
ting number on the bottom line.
Station scanning
(Scan function)
Press button 7(SCAN) to start
scanning the stations in the frequen-
cy band selected (FM, AM, MW,
LW). The frequency of each station
found is shown on the display.
While scanning the display will
show “TUNER SCAN”, or “CDC
SCAN” (if the CD Changer is fit-
ted), with the word “SCAN” flash-
ing.When the SCANfunction is on, all
the other functions are cancelled.
The SCANfunction is interrupted
in the following cases:
– pressing again 7(SCAN)
– turning the set off
– changing the listening source
(Cassette, CD Changer)
– changing the frequency band (or
storing section) selected
– pressing a preset button
– turning AutoSTore on (automatic
storage)
– inserting a cassette.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 21

22 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
22
– changing the FM level or frequen-
cy band selected
– inserting a cassette
Manual station storage
The station being heard can be
stored in the range selected with
buttons numbered from 1 to 6.
Keep one of these buttons (from 1
to 6) pressed. After storage, the dis-
play shows the number of the button
with which the station has been
stored and a confirmation beep
sounds.
AutoSTore function
(automatic station storage)
To switch on the AutoSTore func-
tion, keep the 13(BAND
AS) but-
ton pressed. With this function the
radio automatically stores the sta-
tions with the strongest signal in
decreasing order of intensity of the
FMAST frequency band. IMPORTANTActivating the
AutoSTore function cancels the sta-
tions stored previously in the
FMAST band.
During automatic storage the dis-
play shows “TUNER FMAST” or
“TUNER AMAST” if in the
TUNER mode (Radio) with FM or
AM frequency bands. To interrupt
the storage process, press the 13
(BAND
AS) button again: the radio
will automatically tune to the station
heard before activation of the
AutoSTorefunction.
Listening to stored stations
Proceed as follows:
– select the required frequency
band and the storing section (FM1,
FM2, FM3, FMAST, MW, LW,
AMAST);
– briefly press (less than 1 second)
one of the six station storage but-
tons. Scanning preset stations
Press the 7(SCAN) button for at
least 2 seconds to start scanning the
preset stations in the present fre-
quency band;
– FM: FM 1, FM 2, …., FM II 1, FM
II 2,… FM III 1, FM III 2,… FMAST 1,
FMAST 2, ….
– AM: MW 1, MW 2, …. MW 6,
LW 1, LW 2, …. LW 6, AMAST 1,
AMAST 2, …
Each preset station will be heard
for few seconds and its frequency
shown on the display.
The preset station SCANfunction
is interrupted in the following cases:
– pressing again 7(SCAN)
– turning the set off
– pressing a preset button
– turning AutoSTore on (automatic
storage)
– changing the listening source
(Cassette, CD Changer)
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 22

RADIO WITH CASSETTE PLAYER
23 Nero- Testo 603.46.306 Radio Stilo gb
23
The display will show the station
name (if any) and frequency, and on
the bottom line of the display will be
shown “Pn” where ncorresponds
to the active presetting number.
In bands FM1, FM2, FM3 and
FMAST, if reception is poor and the
AF alternative frequency search
function is active, the station with
the strongest signal that is broad-
casting the same programme will be
sought automatically.
AF function (alternative fre-
quency search)
To turn on/off the alternative fre-
quency search function (AF func-
tion), press briefly (less than 1 sec-
ond) the 8(AF
PTY) button. The
name RDS (if available) stays on the
display and if the AF function has
been turned on the messageAF
SWITCHING:ONis displayed.
– “AF SWITCHING: ON” =
alternative frequency searchon
– “AF SWITCHING: OFF” =
alternative frequency search off.When the signal of the RDS station
tuned weakens, the following two
cases may occur:
– With “AF SWITCHING: ON”
the RDS system activates automatic
tuning of the optimum frequency of
the station chosen, with the stations
enabled, therefore the radio is auto-
matically tuned to the station with
the strongest signal that is broad-
casting the same programme. During
the journey it will thus be possible to
continue listening to the station cho-
sen without having to change the fre-
quency when changing area. Of
course, the station being listened to
must be receivable in the area the
car is crossing.
– With “AF SWITCHING:
OFF” the radio will not tune the
strongest station automatically and it
will have to be found manually using
the tuner buttons.TA function (traffic informa-
tion)
Certain stations in the FM band (in
FM1, FM2, FM3 and FMAST storing
sections) are enabled to also broad-
cast information about traffic condi-
tions. When listening to traffic infor-
mation the display shows "TRAF-
FIC INFO" and the current station
(e.g. station name) alternately.
To turn the TA (traffic information)
function on/off, briefly press (less
than 1 second) the 9(TA) button. If
the function is on the display shows
“TA-ON”.
With the TAfunction on, at the
start of the traffic bulletin the radio
stops temporarily the current sta-
tion or the cassette/CD in order to
broadcast traffic information. This is
possible only if the current station
selected and the station broadcasting
traffic information are connected for
the EONfunction.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 23