2005 FIAT STILO turn signal

14 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
14
Dolby B
Tape noise limiting device produced
under licence of “Dolby Laboratories
Licensing Corporation”.
EON (Enhanced Other
Network)
Function that allows the radio to
tune automatically on a different sta-
tion that the one being listened to
which broadcasts traffic information.
Fader
Function with which it is possible to
suitably adjust the sound from the
front or rear speakers.
Loudness
Function that emphasises the bass
and treble tones when listening at
low level. It is cut off when the vol-
ume is set to maximum (level 34). Autostore
Function with which it is possible to
store automatically radio stations.
Balance (Channel balancing)
Function with which it is possible to
suitably adjust the sound from the
right or left speakers.
Bass (Bass tones)
This function adjusts the bass
tones.
CD-Changer
Multiple Compact Disc player.
Distant/Local (Sens Dx/Loc)
These are two levels of reception
sensitivity.
1) Distant(maximum sensitivity),
which makes it possible to tune all
the stations that can be received.
2) Local(minimum sensitivity),
which makes it possible to tune only
those stations with sufficiently strong
signals, such as for example local sta-
tions.GLOSSARY
AF (Alternative Frequency)
Function that allows the radio to
stay tuned on the FM station select-
ed also passing through areas served
by transmitters with different fre-
quencies.
The RDS system actually keeps the
intensity and quality of the signal
received under control, automatical-
ly switching tuning on the frequency
of the transmitter that is sending the
strongest signal.
AMS (Automatic Music Search)
This function enables to play auto-
matically the next/previous track
provided that between the two
tracks there is a pause/muting of
about 4 seconds.
Autoreverse
Function that makes it possible to
listen to both sides of the tape with-
out having to turn the cassette over.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 14

22 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
22
– changing the FM level or frequen-
cy band selected
– inserting a cassette
Manual station storage
The station being heard can be
stored in the range selected with
buttons numbered from 1 to 6.
Keep one of these buttons (from 1
to 6) pressed. After storage, the dis-
play shows the number of the button
with which the station has been
stored and a confirmation beep
sounds.
AutoSTore function
(automatic station storage)
To switch on the AutoSTore func-
tion, keep the 13(BAND
AS) but-
ton pressed. With this function the
radio automatically stores the sta-
tions with the strongest signal in
decreasing order of intensity of the
FMAST frequency band. IMPORTANTActivating the
AutoSTore function cancels the sta-
tions stored previously in the
FMAST band.
During automatic storage the dis-
play shows “TUNER FMAST” or
“TUNER AMAST” if in the
TUNER mode (Radio) with FM or
AM frequency bands. To interrupt
the storage process, press the 13
(BAND
AS) button again: the radio
will automatically tune to the station
heard before activation of the
AutoSTorefunction.
Listening to stored stations
Proceed as follows:
– select the required frequency
band and the storing section (FM1,
FM2, FM3, FMAST, MW, LW,
AMAST);
– briefly press (less than 1 second)
one of the six station storage but-
tons. Scanning preset stations
Press the 7(SCAN) button for at
least 2 seconds to start scanning the
preset stations in the present fre-
quency band;
– FM: FM 1, FM 2, …., FM II 1, FM
II 2,… FM III 1, FM III 2,… FMAST 1,
FMAST 2, ….
– AM: MW 1, MW 2, …. MW 6,
LW 1, LW 2, …. LW 6, AMAST 1,
AMAST 2, …
Each preset station will be heard
for few seconds and its frequency
shown on the display.
The preset station SCANfunction
is interrupted in the following cases:
– pressing again 7(SCAN)
– turning the set off
– pressing a preset button
– turning AutoSTore on (automatic
storage)
– changing the listening source
(Cassette, CD Changer)
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 22

RADIO WITH CASSETTE PLAYER
23 Nero- Testo 603.46.306 Radio Stilo gb
23
The display will show the station
name (if any) and frequency, and on
the bottom line of the display will be
shown “Pn” where ncorresponds
to the active presetting number.
In bands FM1, FM2, FM3 and
FMAST, if reception is poor and the
AF alternative frequency search
function is active, the station with
the strongest signal that is broad-
casting the same programme will be
sought automatically.
AF function (alternative fre-
quency search)
To turn on/off the alternative fre-
quency search function (AF func-
tion), press briefly (less than 1 sec-
ond) the 8(AF
PTY) button. The
name RDS (if available) stays on the
display and if the AF function has
been turned on the messageAF
SWITCHING:ONis displayed.
– “AF SWITCHING: ON” =
alternative frequency searchon
– “AF SWITCHING: OFF” =
alternative frequency search off.When the signal of the RDS station
tuned weakens, the following two
cases may occur:
– With “AF SWITCHING: ON”
the RDS system activates automatic
tuning of the optimum frequency of
the station chosen, with the stations
enabled, therefore the radio is auto-
matically tuned to the station with
the strongest signal that is broad-
casting the same programme. During
the journey it will thus be possible to
continue listening to the station cho-
sen without having to change the fre-
quency when changing area. Of
course, the station being listened to
must be receivable in the area the
car is crossing.
– With “AF SWITCHING:
OFF” the radio will not tune the
strongest station automatically and it
will have to be found manually using
the tuner buttons.TA function (traffic informa-
tion)
Certain stations in the FM band (in
FM1, FM2, FM3 and FMAST storing
sections) are enabled to also broad-
cast information about traffic condi-
tions. When listening to traffic infor-
mation the display shows "TRAF-
FIC INFO" and the current station
(e.g. station name) alternately.
To turn the TA (traffic information)
function on/off, briefly press (less
than 1 second) the 9(TA) button. If
the function is on the display shows
“TA-ON”.
With the TAfunction on, at the
start of the traffic bulletin the radio
stops temporarily the current sta-
tion or the cassette/CD in order to
broadcast traffic information. This is
possible only if the current station
selected and the station broadcasting
traffic information are connected for
the EONfunction.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 23

26 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
26
To switch from manual to automat-
ic press buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “TUNING SEEK: AUTO” =
automatic seek
– “TUNING SEEK: MANUAL”
= manual seek.
2 - function confirmation beep
(BEEP)
System is fitted with the BEEP
function (the display shows
“ROGER BEEP-ON”).
This function confirms button
pressing by a sound indication
(BEEP).
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “ROGER BEEP: ON” = func-
tion on
– “ROGER BEEP: OFF” = func-
tion off.3 - tuner sensitivity adjustment
(SENS DX/LO)
With this function it is possible to
change the sensitivity of automatic
station searching. When low sensi-
tivity is set “SENSITIVITY:
LOCAL” only stations with excel-
lent reception are sought; when high
sensitivity is set “SENSITIVITY:
DISTANT” all stations are sought.
Therefore, if the car is in an area
with a considerable number of sta-
tions and you want to choose only
those with a strong signal, set to low
sensitivity “SENSITIVITY:
LOCAL”.
To turn this function on/off press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “SENSITIVITY: LOCAL” =
low sensitivity
– “SENSITIVITY: DISTANT” =
high sensitivity. 3Max. volume setting at switching
on (MAX VOLUME)
4Phone volume adjustment func-
tion (PHONE)
5AUTO setting selection through
which radio on/off depends on
engine starting/stopping.
To turn the selected function on/off
press button/knob 10 (VOL PUSH
ON/OFF).
NOTEWhen passing to next set-
ting item, the previous set one is
stored.
ADJUSTMENTS
First level menu functions
1 - manual tuning seek on/off
(TUNING SEEK)
This function enables to search
manually (MANUAL) or automatical-
ly (AUTO) the stored stations.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 26

54 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
54
Scanning preset stations
Press the 7 (SCAN)button for at
least 2 seconds to start scanning the
preset stations in the present fre-
quency band;
– FM:FM 1, FM 2, …., FM II 1, FM
II 2,… FM III 1, FM III 2,… FMAST 1,
FMAST 2,….
– AM:MW 1, MW 2, …. MW 6,
LW 1, LW 2, …. LW 6, AMAST 1,
AMAST 2,…
Each preset station will be heard
for few seconds and its frequency
shown on the display.
The preset station SCANfunction
is interrupted in the following cases:
– pressing again 7(SCAN)
– turning the set off
– pressing a preset button
– turning AutoSTore on (automatic
storage)
– changing the listening source
(Radio, CD Changer)
– changing the FM level or frequen-
cy band selectedManual station storage
The station being heard can be
stored in the range selected with
buttons numbered from 1 to 6.
Keep one of these buttons (from 1
to 6) pressed. After storage, the dis-
play shows the number of the button
with which the station has been
stored and a confirmation beep
sounds.
AutoSTore function
(automatic station storage)
To switch on the AutoSTore func-
tion, keep the13(BAND
AS) but-
ton pressed. With this function the
radio automatically stores the sta-
tions with the strongest signal in
decreasing order of intensity of the
FMAST frequency band.
IMPORTANT Activating the
AutoSTore function cancels the sta-
tions stored previously in the
FMAST band.During automatic storage the dis-
play shows “TUNER FMAST” or
“TUNER AMAST” if in the
TUNER mode (Radio) with FM or
AM frequency bands. To interrupt
the storage process, press the 13
(BAND
AS) button again: the radio
will automatically tune to the station
heard before activation of the
AutoSTorefunction.
Listening to stored stations
Proceed as follows:
– select the required frequency
band and the storing section (FM1,
FM2, FM3, FMAST, MW, LW,
AMAST);
– briefly press (less than 1 second)
one of the six station storage but-
tons.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 54

RADIO WITH COMPACT DISC PLAYER
55 Nero- Testo 603.46.306 Radio Stilo gb
55
The display will show the station
name (if any) and frequency, and on
the bottom line of the display will be
shown “Pn” where ncorresponds
to the active presetting number.
In bands FM1, FM2 and FM3 if
reception is poor and the AF alter-
native frequency search function is
active, the station with the strongest
signal that is broadcasting the same
programme will be sought automati-
cally.
AF function
(alternative frequency search)
To turn on/off the alternative fre-
quency search function (AF func-
tion), press briefly (less than 1 sec-
ond) the 8(AF PTY) button. The
name RDS (if available) stays on the
display and if the AF function has
been turned on the message AF
SWITCHING: ONis displayed.
– “AF SWITCHING: ON”=
alternative frequency search on
– “AF SWITCHING: OFF” =
alternative frequency search off.When the signal of the RDS station
tuned weakens, the following two
cases may occur:
– With “AF SWITCHING:ON”
the RDS system activates automatic
tuning of the optimum frequency of
the station chosen, with the stations
enabled, therefore the radio is auto-
matically tuned to the station with
the strongest signal that is broadcast-
ing the same programme. During the
journey it will thus be possible to
continue listening to the station cho-
sen without having to change the fre-
quency when changing area. Of
course, the station being listened to
must be receivable in the area the car
is crossing.
– With “AF SWITCHING: OFF”
the radio will not tune the strongest
station automatically and it will have
to be found manually using the tuner
buttons.TA function
(traffic information)
Certain stations in the FM band (in
FM1, FM2, FM3 and FMAST storing
sections) are enabled to also broad-
cast information about traffic condi-
tions. When listening to traffic infor-
mation the display shows “TRAF-
FIC INFO” and the current station
(e.g. station name) alternately.
To turn the TA (traffic information)
function on/off, briefly press (less
than 1 second) the 9(TA) button. If
the function is on the display shows
“TA-ON”.
With the TAfunction on, at the
start of the traffic bulletin the radio
stops temporarily the current sta-
tion or the CD in order to broadcast
traffic information. This is possible
only if the current station selected
and the station broadcasting traffic
information are connected for the
EONfunction.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 55

58 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH COMPACT DISC PLAYER
58
The functions controlled by the
second levelmenu are:
1Current RDS station time display
(if any)
2audio distortion clipper on/off
(AUDIO CLIP DETECT)
3Max. volume setting at switching
on (MAX VOLUME)
4Phone volume adjustment func-
tion (PHONE)
5AUTO setting selection through
which radio on/off depends on
engine starting/stopping.
To turn the selected function on/off
press button/knob 10(VOL PUSH
ON/OFF).
NOTEWhen passing to next set-
ting item, the previous set one is
stored.
ADJUSTMENTS
First level menu functions
1 - manual tuning seek on/off
(TUNING SEEK)
This function enables to search
manually (MANUAL) or automatical-
ly (AUTO) the stored stations.To switch from manual to automat-
ic press buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “TUNING SEEK: AUTO”:
automatic seek on
– “TUNING SEEK: MANUAL”:
manual seek on.
2 - function confirmation beep
(BEEP)
System is fitted with the BEEP
function (the display shows
“ROGER BEEP-ON”).
This function confirms button
pressing by a sound indication
(BEEP).
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “ROGER BEEP: ON” = func-
tion on
– “ROGER BEEP: OFF” = func-
tion off.3 - tuner sensitivity adjustment
(SENS DX/LO)
With this function it is possible to
change the sensitivity of automatic
station searching. When low sensi-
tivity is set “SENSITIVITY:
LOCAL” only stations with excel-
lent reception are sought; when high
sensitivity is set “SENSITIVITY:
DISTANT” all stations are sought.
Therefore, if the car is in an area
with a considerable number of sta-
tions and you want to choose only
those with a strong signal, set to low
sensitivity “SENSITIVITY:
LOCAL”.
To turn this function on/off, press
buttons 15(<<) or 6(>>).
The display will show the current
status of the function:
– “SENSITIVITY: LOCAL” =
low sensitivity
– “SENSITIVITY: DISTANT” =
high sensitivity.
603.46.306 Radio Stilo GB 7-04-2005 8:54 Pagina 58