2005 DODGE GRAND CARAVAN ad blue

HANDS – FREE COMMUNICATION (UConnect ™ ) —
IF EQUIPPED
UConnect ™ is a voice-activated, hands-free, in-vehicle
communications system. UConnect ™ ; allows you to dial
your cellular phone using simple voice commands (e.g.,
“ Call Mike Work ” or “ Dial 248-555-1212 ” ). Your cellular
phone ’ s audio is transmitted through your vehicle ’ s
stereo system; the system will automatically mute your
radio before receiving or sending a call.
NOTE: The UConnect ™ system use requires a cellular
phone equipped with the Bluetooth  Hands-Free Profile, 
version 0.96 or higher.
For UConnect Customer Support call 1-877-855-8400 or
visit the UConnect website (www.chrysler.com/
uconnect). UConnect ™ allows you to transfer calls between the
system and your cellular phone as you enter or exit your
vehicle, and enables you to mute the system ’ s micro-
phone for private conversations.
The UConnect ™ ; phone book enables you to store up to
32 names and four numbers per name. This system is
driven through your Bluetooth ™ Hands-Free Profile
cellular phone. UConnect ™ features Bluetooth ™ technol-
ogy - the global standard that enables different electronic
devices to connect to each other without wires or a
docking station, so UConnect ™ works no matter where
you stow your cellular phone (be it your purse, pocket, or
briefcase). UConnect ™ allows up to seven cellular
phones to be linked to the system, and it is available in
English, French, or Spanish formats (as equipped).96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The rearview mirror contains the microphone for the
system and the control buttons that will enable you to
access the system. The diagram below shows the mirror
with the appropriate buttons. Individual button behavior
is discussed in the “ Operation ” Section.
The UConnect ™ system can be used with any Hands
Free Profile certified Bluetooth ™ cellular phone. If your cellular phone has a different profile (i.e. headset profile),
you will not be able to use any UConnect ™ features.
The UConnect ™ system is fully integrated into your
vehicle, including your vehicle ’ s stereo system. All voice
prompts as well as the other party ’ s voice in a conversa-
tion will be played over your vehicle ’ s stereo system. The
volume of the UConnect ™ system can be controlled
through your normal stereo controls.
The radio display will be used for visual prompts from
the UConnect ™ system such as caller ID.
Operation
Voice commands can be used in the operation of the
UConnect ™ system and to navigate through the UCon-
nect ™ menu structure. Voice commands should be given
after each UConnect ™ system prompt. You will be
prompted for a specific command and then guided
through the available options. There are two ways to give
commands to the UConnect ™ system:UConnect ™ Switches UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97
3

• You can say  Dial  at the  Ready  prompt. When
prompted for the phone number you wish to dial, say
the phone number (  123 456 7890  ).
• Alternatively as you become familiar with the UCon-
nect ™ system, you can combine the commands and
say  Dial 123 456 7890  .
Pairing a Cellular Phone to the UConnect ™ System
To begin using your UConnect ™ system, you must pair
your compatible Bluetooth ™ enabled cellular phone. To
complete the registration process, you will need to refer-
ence your cellular phone owner ’ s manual.
• Press the ’ Phone ’ button to begin.
• After the  Ready  prompt, say  Setup Phone Pairing  .
• You will be asked to say a four-digit pin number into
the UConnect ™ system which you will later need to
enter into your cellular phone during the cellular
phone pairing process. You can enter any four-digit pin number. You will not need to remember this pin
number after the initial registration process.
• The UConnect ™ system will then prompt you to begin
the cellular phone pairing process on your cellular
phone. Please see your cellular phone user ’ s manual
for instructions on how to complete this step.
• For identification purposes, you will be prompted to
give the UConnect ™ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
• You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 having the highest
priority. You can connect up to seven cellular phones
to your UConnect ™ system and the priority allows the
UConnect ™ system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if a priority 3 and priority 5
cellular phone are both in the vehicle, the UConnect ™98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Delete Paired Cellular Phones
• Press the ’ Phone ’ button to begin.
• After the  Ready  prompt, say  Setup Phone Pairing  .
• At the next prompt, say  Delete  .
• You will be asked to say the name of the phone that
you wish to delete. You can either say the name of the
phone that you wish to delete or you can say  All  to
delete all the phones.
Connect or Disconnect the Connection between the
UConnect ™ System and Your Cellular Phone
Your cellular phone can be paired with many different
electronic devices, but can only be actively  connected 
with one electronic device at a time. If you would like to connect or disconnect the Blue-
tooth ™ connection between a paired cellular phone and
the UConnect ™ system, follow the instruction described
in your cellular phone user ’ s manual.
List Paired Cellular Phone Names
• Press the ’ Phone ’ button to begin.
• After the  Ready  prompt, say  Setup List Phones  and
the UConnect ™ system will play the phone names of
all paired cellular phones in order from highest prior-
ity to lowest priority.
Select a Lower Priority Paired Cellular Phone
• Press the ’ Phone ’ button to begin.
• After the  Ready  prompt, say  Setup Select Phone  .
• When prompted, say the phone name of the cellular
phone you wish to use, or say  List Phones  to hear a
list of all the phones that have been paired to your104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Turning Confirmation Prompts On/Off
Turning confirmation prompts off will stop the system
from confirming your choices (e.g. the UConnect ™ sys-
tem will not repeat a phone number before you dial it).
• Press the ’ Phone ’ button to begin.
• After the  Ready  prompt, say  Setup Confirmation  .
The UConnect ™ system will play the current confir-
mation prompt status and you will be given the choice
to change it.
Low Signal, Battery Strength, and Roam
Notification
The UConnect ™ system will provide notification to
inform you if your cellular phone is in roaming status,
has low signal strength, or has a low battery when you
are trying to place a phone call. Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the UConnect ™ system. By dialing a
number with your paired Bluetooth ™ cellular phone, the
audio will be played through your vehicle ’ s stereo sys-
tem. The UConnect ™ system will work the same as if
you dialed the number using voice recognition.
Mute/Unmute
When you mute the UConnect ™ system, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the UConnect ™ system press the ’ Voice
Recognition ’ button and say  Mute  . In order to unmute
the UConnect ™ system; press the ’ Voice Recognition ’
button and say  Unmute  .106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Program Type Radio Display
Country Country
Information Inform
Jazz Jazz
Foreign Language Language
News News
Nostalgia Nostalga
Oldies Oldies
Personality Persnlty
Public Public
Rhythm and Blues R & B
Religious Music Rel Musc
Religious Talk Rel Talk
Rock Rock
Soft Soft
Soft Rock Soft Rck
Soft Rhythm and Blues Soft R&B Program Type Radio Display
Sports Sports
Talk Talk
Top 40 Top 40
Weather Weather
By pressing the SEEK button when the PTY icon is
displayed, the radio will be tuned to the next frequency
station with the same selected PTY name. The PTY
function only operates when in the FM mode.
The radio display will flash “ SEEK ” and the selected PTY
program type when searching for the next PTY station. If
no station is found with the selected PTY program type,
the radio will return to the last preset station.
If a preset button is activated while in the PTY (Program
Type) mode, the PTY mode will be exited and the radio
will tune to the preset station.208 UNDERSTANDING YOUR INSTRUMENT PANEL

Radio Operation
Power/Volume Control
Press the ON/VOL control to turn the radio on. Turn the
volume control to the right to increase the volume.
NOTE: Power to operate the radio is supplied through
the ignition switch. It must be in the ON or ACC position
to operate the radio.
PTY (Program Type) Button
Pressing this button once will turn on the PTY mode for
5 seconds. If no action is taken during the 5 second time
out the PTY icon will turn off. Pressing the PTY button
within 5 seconds will allow the program format type to
be selected. Many radio stations do not currently broad-
cast PTY information.
Toggle the PTY button to select the following format
types: Program Type Radio Display
Adult Hits Adlt Hit
Classical Classicl
Classic Rock Cls Rock
College College
Country Country
Information Inform
Jazz Jazz
Foreign Language Language
News News
Nostalgia Nostalga
Oldies Oldies
Personality Persnlty
Public Public
Rhythm and Blues R & B
Religious Music Rel Musc
Religious Talk Rel TalkUNDERSTANDING YOUR INSTRUMENT PANEL 217
4

Program Type Radio Display
Rock Rock
Soft Soft
Soft Rock Soft Rck
Soft Rhythm and Blues Soft R&B
Sports Sports
Talk Talk
Top 40 Top 40
Weather Weather
By pressing the SEEK button when the PTY icon is
displayed, the radio will be tuned to the next frequency
station with the same selected PTY name. The PTY
function only operates when in the FM and Satellite (if
equipped) modes.
The radio display will flash “ SEEK ” and the selected PTY
program type when searching for the next PTY station. If no station is found with the selected PTY program type,
the radio will return to the last preset station.
If a preset button is activated while in the PTY (Program
Type) mode, the PTY mode will be exited and the radio
will tune to the preset station.
Pressing PTY, then SCAN will scan the FM Band and stop
at all RDS stations that broadcast the station type. Each
RDS station will be played for a 5 second scan once
around the FM Band and stop at the last station. The PTY
icon will then turn off.
Seek
Press and release the SEEK button to search for the next
station in either the AM or FM mode. Press the top of the
button to seek up and the bottom to seek down. The
radio will remain tuned to the new station until you
make another selection. Holding the button in will by-
pass stations without stopping until you release it.218 UNDERSTANDING YOUR INSTRUMENT PANEL