2005 CITROEN C6 boot

Downloaded from www.Manualslib.com manuals search engine 6
GENERAL
GENERAL SPECIFICATION: DIMENSIONS
ODM =Vehicle in running order (vehicle empty, levels topped up).
Exterior dimensions (mm)
VehiclesAll types
WheelbaseA 2900Front overhangB 1124Rear overhangC 884Length overallD 4908Front track at ground levelE 1586Width overallF 2081Rear track at ground levelG 1558Track widthH 1860
Height overall ODMJ 1464
Interior dimensions and volumes (mm)
Elbow width, front1503Elbow width, rear1510Height under boot490Minimum floor width111 5
Volume of boot below parcel shelf407 dm
3
(*) = Boot floor can be moved and configured.
Angl-C6-page001-21-2005 4/02/05 17:12 Page 6

Downloaded from www.Manualslib.com manuals search engine 8
GENERAL
OPERATIONS TO BE CARRIED OUT BEFORE AND AFTER A DISCONNECTION OF THE BATTERY
Before reconnecting the battery
.
Doors and tailgate.
WARNING: Before disconnecting the battery, partially open the door
windows.
Automatic gearbox.
If the vehicle has to remain stationary: Pplace the gear lever in the parking
position "P".
If the vehicle has to be moved: Place the gear lever in the neutral position
"N".
Electric parking brake.
If the vehicle has to remain stationary: Activate the electric parking brake.
If the vehicle has to be moved: Deactivate the electric parking brake.
Features of the vehicle's electrical supply.
When the boot is closed and the battery is disconnected, it is possible to
supply the vehicle by connecting another battery or a 12Vexterior supply.
Operations to be performed:
- Link the earth of the exterior supply to the vehicle earth.
- Link the 12Vof the exterior supply to the positive terminal of the battery +
unit, in the front left hand side of the engine compartment.
After reconnecting the battery
.
Antiscanning function.
It is necessary to wait 1 minuteafter reconnecting the battery in order to be
able to restart the vehicle.
Electric windows.
It may be necessary to re-initialise the sequential and anti-pinch functions.NOTE:If the window is open at the time the battery is reconnected, action
the window switch several times to close it, then re-initialise.
Open the window fully.
Action and release the window switch until the window is completely closed.
NOTE:This operation has to be carried out on each electric window.
Sun roof.
The anti-pinch function has to be re-initialised.
Place the sun roof switch in the maximum tilt position.
Keep the sun roof switch pressed until the sun roof ceases its movement.
Release the sun roof switch.
Press the sun roof switch within 5 seconds.
Keep the sun roof switch pressed until the end of the sun roof opening
sequence.
Multifunction screen.
It is necessary to adjust the date, time and outside temperature.
Adjust the display language of the multifunction screen if necessary.
NOTE:The default display language of the multifunction screen is French.
Reconfigure the personalisation menu of the multifunction screen.
Radio.
Reprogramme the radio stations.
Telematic control unit (RT3 radiotelephone).
Reprogramme the radio stations.
Navigation.
Warning: the vehicle has to be out in the open (when you switch on
the ignition, the navigation ECU searches for satellites).
Reprogramme the customer parameters.
Angl-C6-page001-21-2005 4/02/05 17:12 Page 8

Downloaded from www.Manualslib.com manuals search engine 9
GENERAL
GENERAL SPECIFICATION: TOWING THE VEHICLE
WARNING: When the engine is not running,
steering and braking are no longer power-assisted.
Open the boot.
Lift the boot floor plate.
Towing eye.
The towing eye (1)is to be found in the vehicle
toolkit (2)stowed in the spare wheel.
Front of the vehicle.
Open the flap (3).
Screw in the towing eye (1).
Rear of the vehicle.
Open the flap (4).
Screw in the towing eye (1).
E2AP02RD
Front towingRear towing
E2AP02SDE2AP02TD
Angl-C6-page001-21-2005 4/02/05 17:12 Page 9