2005 CITROEN C6 sensor

Downloaded from www.Manualslib.com manuals search engine 37
ENGINE
ENGINE TIGHTENING TORQUES
Lubrication
19 Oil filter cover 2,3 ± 0,3
20 Oil filter support
0,9 ± 0,221 Oil/coolant heat exchanger22 Oil pressure switch 1,3 ± 0,223 Oil pump assembly 0,9 ± 0,224 Oil gauge 2,3 ± 0,325 Oil level sensor 2,7 ± 0,526 Oil sump 0,9 ± 0,227 Drain plug 2,3 ± 0,328 Oil suction strainer 0,9 ± 0,129 Piston skirt spray jets 1 ± 0,130 Turbocharger lubrication pipe 0,9 ± 0,231 Turbocharger lubrication pipe 1,3 ± 0,3Engine: DT17BTED4
B1DP1M6P
Angl-C6-page022-82-2005 4/02/05 17:19 Page 37

Downloaded from www.Manualslib.com manuals search engine 68
ENGINE
EXHAUST SPECIFICATIONS1Upstream oxygen sensor (rear)
2Downstream oxygen sensor (rear)
3Downstream oxygen (front)4,7 ± 0,54Upstream oxygen sensor (front)
5Precatalyser (rear)3,5 ± 0,56Precatalyser (front)7Resonator8Catalytic converter9Rear silencer10Clips2,6 ± 0,3 Engine: ES9A
B1JP08AD
Angl-C6-page022-82-2005 4/02/05 17:19 Page 68

Downloaded from www.Manualslib.com manuals search engine 73
ENGINE
73
COOLING SYSTEM SPECIFICATIONS
Engine type
Capacity
Radiator surface
Pressurisation
Opening of thermostatic regulator
Cooling fan
1st speed
2nd speed
3rd speed
Air con cut-off
Alert
Post cooling
Marking
Information
Sensor
Colour of connector
Tightening (m.daN)
Engines: ES9A - DTE17BTED4
3.0i 24S 2,7 24V
XFV UHZ
11,3 13,2
27 dm
2
1,4 bar
78°C 83°C
1 x 600 W 2 x 150W
FRIC function 97°C or aircon in operation
105°C 101°C or 17 bars in the aircon circuit
105° or 30 bars in the aircon circuit
115°C or 30 bars in the aircon circuit
118°C
6 minutes
11 6
Level of coolant Temperature of coolant Temperature, diesel injection, alert, aircon
Resistance Thermostat Thermostat
Black Blue Grey
1,7 ± 0,4
Angl-C6-page022-82-2005 4/02/05 17:19 Page 73

Downloaded from www.Manualslib.com manuals search engine 74
ENGINE
COOLING SYSTEM SPECIFICATIONS
Engine: ES9A
(1)Heater matrix
(2)Bleed screw
(3)Coolant outlet housing
(4)Coolant inlet housing
(5)Thermostat
(6)Coolant temperature sensor
(7) Coolant/oil heat exchanger (engine)
(8)Cooling radiator drain plug
(9)Coolant/oil heat exchanger (automatic gearbox)
(10)Engine cooling radiator
(11)Coolant level sensor
(12)Header tank
(13) Venting chamber
B1GP0CXP
Angl-C6-page022-82-2005 4/02/05 17:19 Page 74

Downloaded from www.Manualslib.com manuals search engine 83
INJECTION
BOSCH ME 7.4.7 INJECTION SYSTEM
Engine: ES9A
Synopsis.
(1) Fuel consumption information
(2)Ignition injection test warning lamp
(3)Rev counter
(4)Air conditioning ECU
(5)Multifunction screen
(6)Built-in systems interface
(7)Transponder
(8)Automatic gearbox ECU
(9)Fuel pump, filter and pressure regulator (except grande exportation)
(10)Battery
(11)Pressostat
(12)Engine speed sensor
(13)Camshaft position sensor (x2)
(14)Motorised butterfly housing
B1HP1Z9P
Angl-C6-page83-100-2005 4/02/05 17:22 Page 83

Downloaded from www.Manualslib.com manuals search engine 84
INJECTION
BOSCH ME 7.4.7 INJECTION SYSTEM
Engine: ES9A
Synopsis.
(15) Canister purge electrovalve
(16)Cooling fan
(17)Pencil type ignition coil (x6)
(18)Petrol injector (x6)
(19)Variable timing electrovalve (x2)
(20)Downstream oxygen sensor (x2)
(21)Upstream oxygen sensor (x2)
(22)Engine coolant temperature sensor
(23)Knock sensor (x2)
(24) Power steering pressure sensor
(25)Integrated pressure sensor
(26)Accelerator pedal position sensor
(27)Inlet air temperature sensor
(28)Diagnostic connector
(29)Ignition injection ECU
B1HP1Z9P
Angl-C6-page83-100-2005 4/02/05 17:22 Page 84

Downloaded from www.Manualslib.com manuals search engine 87
INJECTION
BOSCH ME 7.4.7 INJECTION SYSTEM
Engine: ES9AAir circuit
Component Location Supplier Reference Observations
Integrated pressure sensor 25DS-S2 03-way greyconnector
261 260 140 Integrated in the inlet manifold
Motorised butterfly housing 14DVE56-way blackconnector
BOSCH 0 280 750 041 Fixing, on the inlet manifold
Accelerator pedal 14 43 336-way blackconnector
position sensor26 Supply, 5 volts
Fixing, on the accelerator
Electrical circuit
ME 7.4.7.128-wayconnector
Ignition injection
29 BOSCH0 261 B00 736 Sequential injection
ECU"Flash"type Eprom (reprogrammable eprom)
Installation, in the electronic ECU compartment
280 9112-way blueconnector
Opening of contact at 20 bars
Power steering pressureFor ECU information
sensor 24 BITRON(steering on full lock)
Marking mauve ring seal
Fixing : on the power steering high pressure
pump outlet pipe
Angl-C6-page83-100-2005 4/02/05 17:22 Page 87

Downloaded from www.Manualslib.com manuals search engine 88
INJECTION
BOSCH ME 7.4.7 INJECTION SYSTEM
Engine: ES9AElectrical circuit
Component Location Supplier Reference Observations
Inlet air temperature sensor 27 JAEGER 402 084 012-way greyconnector
Fixing: on the air filter inlet duct
Camshaft position
13 ELECTRICFIL14 43 2514 43 3-way grey connector
sensor25
Fixing: on the inlet camshaft bearing cap cover
3-way green connector
Knock sensor 23 BOSCH 0 261 231 10 Fixing: on the central part of the «V»of the engine block
Essential to respect tightening torque: 2 ± 0,5 m.daN
DAV 402 243 032-way greenconnector
Engine coolant temperature 22Fixing: on the coolant outlet housing
sensor
14 43 32Tightening torque:
ELECTRICFILTighten to: 2 ± 0,2 m.daN
Engine speed sensor 12 14 43 282-way blackconnector
Fixing: on the gearbox clutch housing
Angl-C6-page83-100-2005 4/02/05 17:22 Page 88