Page 178 of 223
Downloaded from www.Manualslib.com manuals search engine 172
BRAKES
B3FP7GFC
BRAKING SYSTEM: GENERAL SPECIFICATIONSComponents Supplier Reference Observations
Hydraulic valve blockLocated on the front LH chassis member:
TRWESP 4regulation channels
ECUVSC 440
25-way connector
Integral to the hydraulic valve block
2-way blackconnector
Front wheel sensor The sensors, of inductive type, are fitted on the pivot
SIEMENSAir gap non-adjustable: 0.25 to 1.65 mm
VDO 2-way blackconnector
Rear wheel sensor The sensors, of inductive type, are fitted on the pivot
Air gap non-adjustable: 0.23 to 1.35 mm
Front pivot bearingThe hub has a bearing with integral magnetic wheel
NSK(48 pairs of poles)
Rear hub bearingThe rear hub-bearing has a radial ABS target
(48 pairsof poles)
ABS/ESP hydraulic valve block
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 172
Page 180 of 223
Downloaded from www.Manualslib.com manuals search engine 174
BRAKES
TIGHTENING TORQUES: BRAKING SYSTEM
Front brakes
1 Front brake disc 1 ± 0,12 Yoke on brake caliper 3 ± 0,23 Unions on brake piping 4 ± 0,54 Front brake caliper 11,5 ± 1
5 Hydraulic valve block on intermediate support
0,8 ± 0,26 Intermediate support on support7 Front wheel sensor 0,8 ± 0,1
B3FP7HNDB3FP7HMD
B3FP7HPD
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 174
Page 182 of 223
Downloaded from www.Manualslib.com manuals search engine 176
BRAKES
TIGHTENING TORQUES: BRAKING SYSTEM
Rear brakes
11 Rear brake caliper 3,5 ± 0,312 Unions on brake piping 1,5 ± 0,113 Rear brake caliper support 10,8 ± 114 Rear wheel sensor 0,8 ± 0,1
B3FP7HTDB3FP7HSD
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 176
Page 183 of 223
Downloaded from www.Manualslib.com manuals search engine 177
BRAKES
TIGHTENING TORQUES: BRAKING SYSTEM
15 Electric parking brake system (FSE) 0,4 ± 0,0616 Nut for parking brake cables 6 ± 0,617 Gyrometer/accelerometer sensor on support 0,9 ± 0,118 Sensor support on body 0,4 ± 0,06
B3FP7HVDB3FP7HUD
Parking brake
Gyrometer/accelerometer sensor
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 177