2004 YAMAHA TT600RE Service Manual

1-7
GEN
INFO
SPECIAL TOOLS
Tool No.Tool name / Usage Illustration
90890-04086All-purpose clutch holder
This tool is used to lock the clutch, when the
clutch boss lock nut is being loosened or
tightened.
90890-01135Crankcase separating tool
This tool is necessary to disassemble the
crankcase.
90890-01274Crankshaft installation hose
This tool is used to install the crankshaft.
90890-01275Crankshaft installation bolt
This tool is used to install the crankshaft.
90890-04059#10 (M14) adapter
This tool is used to install the crankshaft.
90890-04081Crank spacer
This tool is used to install the crankshaft.
90890-85505SEALANT (QUICK GASKET) ®
Yamaha Bond No. 1215 ®
This sealant (adhesive) is used for crankcase
mating surfaces etc.
90890-01268Ringnut wrench
This tool is used to loosen and tighten the
steering ringnut.
90890-01348Ringnut wrench
This tool is used to loosen and tighten the
steering ringnut.
ProCarManuals.com

1-8
GEN
INFO
SPECIAL TOOLS
Tool No.Tool name / Usage Illustration
90890-11043DU bush/oil seal guide
This tool is used to install the DU bush and
the fork oil seal.
90890-01326T-handle
This tool is needed to loosen and tighten the
front fork damper rod holding bolt.
90890-01460Front fork damper rod holder
This tool is needed to hold the front fork
damper rod when loosening and tightening
the holding bolt.
ProCarManuals.com

2
SPEC
ProCarManuals.com

SPEC
CHAPTER 2.
SPECIFICATIONS
GENERAL SPECIFICATIONS............................................................................................ 2-1
MAINTENANCE SPECIFICATIONS....................................................................................2-4
ENGINE ........................................................................................................................2-4
CHASSIS ....................................................................................................................2-12
ELECTRICAL ..............................................................................................................2-17
GENERAL TORQUE SPECIFICATIONS............................................................................2-19
CONVERSION TABLE........................................................................................................2-19
LUBRICATION POINTS AND LUBRICANT TYPES..........................................................2-20
ENGINE ......................................................................................................................2-20
CHASSIS ....................................................................................................................2-21
LUBRICATION LAYOUT....................................................................................................2-22
CABLE ROUTING..............................................................................................................2-26
ProCarManuals.com

SPEC
ProCarManuals.com

SPECGENERAL SPECIFICATIONS
2-1
SPECIFICATIONS
GENERAL SPECIFICATIONS
Item Standard Limit
ModelTT600RE: 5CH5
Dimensions
Overall length 2,220 mm •••
Overall width 865 mm •••
Overall height 1,195 mm •••
Seat height 890 mm •••
Wheelbase 1,480 mm •••
Ground clearance 280 mm •••
Minimum turning radius 3,300 mm (right)
3,100 mm (left) •••
Basic weight (with oil and full
fuel tank)164.5 kg •••
Engine
Engine type Air cooled 4-stroke, SOHC
Cylinder arrangement Forward inclined single cylinder
Displacement 595 cm
3•••
Bore x stroke 95.0 x 84.0 mm •••
Compression ratio 8.5 : 1 •••
Starting system Electric starter
Lubrication system Dry sump with separate oil tank
Engine oil
Type
Temp. °CSAE20W40SE or SAE10W30SE •••
Recommended engine oil classification API Service SE, SF, SG or higher •••
Quantity:
Without oil filter cartridge
replacement 2.4 L •••
With oil filter cartridge
replacement 2.5 L •••
Total amount (dry engine) 3.0 L •••
Air filterWet type element
Fuel
Type Regular unleaded gasoline
Fuel tank capacity 10 L •••
Fuel reserve amount 3.0 L •••
Carburetor
Manufacturer TEIKEI
Model x quantity Y30PV-2ATK x 1
ProCarManuals.com

SPECGENERAL SPECIFICATIONS
2-2
Item Standard Limit
Spark plug
Manufacturer/model NGK/DPR8EA-9 or NGK/DPR9EA-9
Gap 0.8–0.9 mm •••
Clutch typeWet. Multiple-disc
Transmission
Primary reduction system Spur gear
Primary reduction ratio 71/34 (2.088)
Secondary reduction system Chain drive
Secondary reduction ratio 47/15 (3.133)
Number of drive chain sprocket
teeth (front/rear) 15/47
Transmission type Constant mesh 5-speed
Operation Left foot
Gear ratio 1
st2.583
2nd1.588
3rd1.200
4th0.955
5th0.792
Chassis
Frame type Open cradle backbone frame/detachable
rear frame
Caster angle 27° •••
Trail 117 mm •••
Tires
Front:
Type With tube
Size 90/90-21-(54R) / 90/90-21-(54S)
Manufacturer/model Pirelli / MT70 - Michelin / T63
Rear:
Type With tube
Size 130/80-18-(66R) / 130/80-18-(66S)
Manufacturer/model Pirelli / MT70 - Michelin / T63
Maximum load* 180 kg •••
Tire air pressure
(measured on cold tires):
Up to 90 kg* Front 200 kPa; 2.00 kgf/cm
2; 2.00 bar •••
Rear 220 kPa; 2.20 kgf/cm2; 2.20 bar •••
90 kg–maximum* Front 210 kPa; 2.10 kgf/cm2; 2.10 bar •••
Rear 240 kPa; 2.40 kgf/cm2; 2.40 bar •••
Off-road riding Front 150 kPa; 1.50 kgf/cm2; 1.50 bar •••
Rear 160 kPa; 1.60 kgf/cm2; 1.60 bar •••
High-speed riding Front 210 kPa; 2.10 kgf/cm2; 2.10 bar •••
Rear 240 kPa; 2.40 kgf/cm2; 2.40 bar •••
* Total weight of rider, passenger,
cargo and accessories
Wheels
Front:
Type Spoke wheel
Size 21” x 1.85
Rear:
Type Spoke wheel
Size 18” x MT 2.50
ProCarManuals.com

SPECGENERAL SPECIFICATIONS
2-3
Item Standard Limit
Brakes
Front:
Type Single Ø 267 mm disk brake,
2 x 28 mm
Operation Right hand
Fluid DOT 4
Rear:
Type Single Ø 220 mm disk brake,
1 x 34 mm caliper
Operation Right foot
Fluid DOT 4
Suspension
Front Telescopic fork Outside tube
dia. 46 mm
Rear Deltabox Swingarm with
adjustable shock absorber
Spring/shock absorber
Front Coil spring / oil damper
RearCoil spring / gas-oil damper, spring
preload adjustable
Wheel travel
Front 230 mm •••
Rear 230 mm •••
Electrical system
Ignition system Transistorized coil ignition (digital)
Charging system:
Type A.C. magneto
Standard output 14V, 13.5A at 5.000 r/min •••
Battery:
Model GT9B-4
Voltage, capacity 12V, 8Ah •••
Headlight typeQuartz bulb (halogen)
Bulb voltage, wattage x quantity
Headlight 12V 60W / 55W x 1 •••
Tail/brake light 12V 5W / 21W x 1 •••
Turn signal light 12V 10W x 4 •••
Auxiliary light 12V 5W x 1 •••
Meter lighting 12V 3W x 1 •••
Turn signal indicator light 12V 1.2W x 1 •••
Neutral indicator light 12V 1.2W x 1 •••
Auxiliary indicator light 12V 1.2W x 1 •••
High beam indicator light 12V 1.2W x 1 •••
Fuse20A •••
ProCarManuals.com