2004 YAMAHA TT600RE fuel reserve

SPECGENERAL SPECIFICATIONS
2-1
SPECIFICATIONS
GENERAL SPECIFICATIONS
Item Standard Limit
ModelTT600RE: 5CH5
Dimensions
Overall length 2,220 mm •••
Overall width 865 mm •••
Overall height 1,195 mm •••
Seat height 890 mm •••
Wheelbase 1,480 mm •••
Ground clearance 280 mm •••
Minimum turning radius 3,300 mm (right)
3,100 mm (left) •••
Basic weight (with oil and full
fuel tank)164.5 kg •••
Engine
Engine type Air cooled 4-stroke, SOHC
Cylinder arrangement Forward inclined single cylinder
Displacement 595 cm
3•••
Bore x stroke 95.0 x 84.0 mm •••
Compression ratio 8.5 : 1 •••
Starting system Electric starter
Lubrication system Dry sump with separate oil tank
Engine oil
Type
Temp. °CSAE20W40SE or SAE10W30SE •••
Recommended engine oil classification API Service SE, SF, SG or higher •••
Quantity:
Without oil filter cartridge
replacement 2.4 L •••
With oil filter cartridge
replacement 2.5 L •••
Total amount (dry engine) 3.0 L •••
Air filterWet type element
Fuel
Type Regular unleaded gasoline
Fuel tank capacity 10 L •••
Fuel reserve amount 3.0 L •••
Carburetor
Manufacturer TEIKEI
Model x quantity Y30PV-2ATK x 1
ProCarManuals.com

SPECMAINTENANCE SPECIFICATIONS
2-15
Tightening
Part to be tightened Thread torque
Remarkssize
N·mm·kg
Front brake:
Front hub/Disc brake M6 x 1.0 12 1.2
Front caliper/Front fork M8 x 1.25 25 2.5
Front caliper/Bleeder tightening M10 x 1.0 14 1.4
Union bolt tightening (front) M10 x 1.0 20 2.0
Rear brake:
Rear hub/Disc brake M6 x 1.0 12 1.2
Rear master cylinder/Frame M6 x 1.0 10 1.0
Rear stop switch/Rear master cylinder M10 x 1.0 20 2.0
Rear caliper/Bleeder tightening M10 x 1.0 14 1.4
Protector rear caliper/Rear caliper M6 x 1.0 10 1.0
Union bolt tightening (rear) M10 x 1.0 20 2.0
Rear brake tank reserve/Air cleaner assy M6 x 1.0 5 0.5
Brake pedal/Frame M10 x 1.25 48 4.8
Sidestand/Footrest:
Sidestand mounting bolt/Frame M12 x 1.25 40 4.0
Sidestand mounting bolt/Nut M12 x 1.25 40 4.0
Sidestand switch/Frame M5 x 0.8 8 0.8
Rear footrest/Rear frame M8 x 1.25 30 3.0
Bracket 1 (main footrest)/Frame M10 x 1.25 48 4.8
Bracket 2 (main footrest)/Frame M10 x 1.25 48 4.8
Footrest cover/Footrest M6 x 1.0 10 1.0
Seat, fuel tank and oil tank:
Seat/Frame M6 x 1.0 10 1.0
Bolt (guide seat)/Fuel tank M6 x 1.0 5 0.5
Fuel tank/Rear frame M6 x 1.0 12 1.2
Damper fuel tank (front)/Frame M8 x 1.25 15 1.5
Fuel tank/Fuel cock M6 x 1.0 7 0.7
Oil tank/Sub-oil tank M6 x 1.0 7 0.7
Union bolt (oil hose 2)/Oil tank assy/Engine M12 x 1.25 35 3.5
Oil hose 1/Oil tank/Engine M6 x 1.0 10 1.0
Oil tank/Rear frame M12 x 1.5 20 2.0
Frame, rear fender compl. and lights:
Rear fender compl. (under)/Rear frame M6 x 1.0 2 0.2
Rear fender compl. (upper)/Rear frame M6 x 1.0 7 0.7
Bracket, license/Rear frame M6 x 1.0 10 1.0
Bracket, license/Rear flasher M6 x 1.0 10 1.0
Horn/Frame M6 x 1.0 13 1.3
Regulator/Frame M8 x 1.25 7 0.7
Igniton coil/Frame M5 x 0.8 13 1.3
Battery box/Rear frame M6 x 1.0 7 0.7
Igniter cover/Battery box M4 1 0.1
Main switch/Frame M24 x 1.0 1 0.1
Tail light (lense)/Rear fender compl. M3.5 1 0.1
Starter switch/Red wire M6 x 1.0 7 0.7
ProCarManuals.com

SPECCABLE ROUTING
2-27









































(1) Front brake hose
(2) Brake hose holder
(3) Left tube guard
(4) Plastic plate
(5) Throttle cables
(6) Tachometer/
odometer cable
(7) Clutch cable
(8) Clutch cable holder
(9) Throttle cables
holder
(10) Wire harness band(11) Fuel pipe from fuel
cock
(12) Flasher relay
(13) Main relay
(14) Sidestand switch
(15) Diodes (n. 3)
(16) A.C. generator wire
harness (engine)
(17) Engine oil breather
pipe (to engine oil
tank)
(18) Main switch(19) Oil hose (oil tank to
engine)
(20) Oil hose (engine to
oil tank)
(21) C.D.I. unit
(22) Starting motor plus
cable
(23) Starting motor
minus cable
(24) Battery
(25) Starting relay
(26) Fuse (reserve)
(27) Fuse (main)(28) Wire extension
(29) Battery plus cable
[A] Lay the brake hose
behind the left tube
guard and fasten it
down by means of
the plate 4.
[B] Attach throttle
cables 5.
[C] Fasten the fuel pipe
11 to the tank.
[D] Fit the 3 diodes
inside the chassis,
against the coil clip.
ProCarManuals.com

CHASREAR SHOCK ABSORBER
4-69
Order Job name/Part name Q.ty Remarks Shock absorber removal Remove the parts in order.
WARNING
Securely support the motorcycle so
there is no danger of it falling over.
Seat Refer to “SEAT, FUEL TANK AND REAR
Fuel tank
Rear cowling COWLING” section in Chapter 3.
Battery leads 2 Disconnect. NOTE:
First, disconnect the negative lead, then the
positive lead.
1 Muffler 1
2 Exhaust pipe assembly 1 Refer to “REAR SHOCK ABSORBER RE-
3 Rear frame 1 MOV AL” section.
4 Brake fluid reserve tank 1 Secure the brake fluid tank to the frame in
5 Air filter case 1 an upright position to avoid air entering the hydraulic system.
ProCarManuals.com