CL-40
CLUTCH SYSTEM
Clutch Pedal
6) Turn the push rod clockwise to shorten until
clearance is made at stopper bolt or clutch switch.
7) Turn the push rod counter clockwise to lengthen
until clutch pedal contacts to stopper bolt.
8) Turn the push rod further 270° counterclockwise
to lengthen (arrow direction as shown in the figure).
9) Move the clevis pin in lateral direction to ensure
it moves smoothly.
10) Tighten the push rod lock nut.
Tightening torque :
10 N
⋅m (1.0 kgf-m, 7.2 ft-lb)
11) Measure the full stroke amount of clutch pedal
again.
Specified clutch pedal full stroke: A
125 — 130 mm (4.92 — 5.12 in)
12) Install the clutch switch.
STALLATION, Clutch Switch.>
(A) Stopper bolt
(A) Clutch pedal
(B) Brake pedal
CL-00134
(A)
CL-00085
(A)
(B)
