2004 Peugeot Partner VP display

22-12-2003
3YOUR PARTNER AT A GLANCE
1 -Speaker (tweeter).
2 - Windscreen demisting vents.
3 - Controls:- Electric windows.
- Demisting of rear door
windows or tailgate.
- Air conditioning.
- ASR/ESP.
4 - Central locking button.
5 - Multifunction display or clock.
6 - Hazard lights button.
7 - Central adjustable heating/ventilation vents.
8 - Lights and direction indica-tors stalk.
9 - Cruise control.
10 - Instrument panel.
11 - Driver's air bag.Horn. 12 -
Windscreen wash-wipe stalk.
13 - Audio equipment steeringwheel control.
14 - Steering lock and ignition.
15 - Fuse box.
16 - Passenger air bag disar-ming control*.
17 - Steering wheel adjustmentcontrol.
18 - Passenger's electric mirrorcontrol.
19 - Headlamp height adjustment.
20 - Heated seats control.
21 - Handbrake.
22 - 12 V accessories socket.
23 - Removable ashtray.
24 - Lighter.
25 - Storage.
26 - Gear lever. 27 -
Heating/air conditioningcontrols.
28 - Audio RB3 or RD3.
29 - Lower glove box.
30 - Upper glove box or passenger air bag.
31 - Bonnet release.
32 - Side adjustableheating/ventilation vents.
33 - Side window demistingvents.
* According to country.

22-12-2003
SERVICE INDICATOR This is a visual reminder of when the
next service is due. This service is tobe carried out according to themanufacturer's servicing schedule. Operation As soon as the ignition is switched on and for 5 seconds, the spannersymbolising ''service operation'' is lit.The trip recorder display shows thedistance remaining (in round figures)before the next service. Example:4,800 miles/km remain
before the next service is due. When the ignition comes on and for 5 seconds the display indicates: 5 seconds after the ignition is swit- ched on, the total distance recorderresumes normal operation and thedisplay shows the total or trip dis-tances. The distance remaining before thenext service is less than 500 miles(1,000 km). Example:
400 miles (900 km)
remain before the next service is due. When switching on the ignition and for 5 seconds, the display shows: 5 seconds after the ignition is swit- ched on, the total distance recorderresumes normal operation and thesymbol remains lit. This indicates that a service should
be carried out shortly. The displayshows the total or trip distances. The service is overdue. Each time the ignition is switched on and for 5 seconds, the symbol andthe excess distance flash. Example:
the service is overdue by
300 miles/km. The service should be
carried out very shortly. When the ignition is switched on and for 5 seconds, the display shows: 5 seconds after the ignition is swit- ched on, the total distance recorderresumes normal operation and the
symbol remains lit. The displayshows the total or trip distances. Note: the service spanner lights if
the two-year interval has been exceeded (see "PEUGEOTServicing" section).
PEUGEOT SERVICING
20

22-12-2003
PEUGEOT SERVICING21
Resetting the service indicator
Your PEUGEOT dealer carries out this operation after each service. The reset procedure is as follows: - Switch off the ignition.
- Press and hold button 1.
- Switch on the ignition.
The display begins a 10 second countdown.
- Keep button 1pressed for
10 seconds.
The display shows [= 0]and the ser-
vice symbol disappears.

Handbrake, low brake fluid level andElectronic BrakeForce Distribution
system fault warning light
Linked to the central (STOP) war- ning light. This indicates one of the following:
- that the handbrake is applied or not fully released,
- an excessive drop in brake fluid level (if the warning light remains on even when the handbrake isreleased),
- a fault in the Electronic Brake Force Distribution system, if lit at
the same time as the ABS war-ning light.
You must stop.
Consult a PEUGEOT dealer.
INSTRUMENTS ANDCONTROLS
A permanently lit warning light or one flashing, with the engine run-ning, indicates an operating faultof the unit concerned. The illumi-nation of certain warning lightsmay be accompanied by anaudible signal and a message on
the multifunction display. Do notignore this warning: consult aPEUGEOT dealer as soon as pos-sible.
If the central STOP warning light comes on when you are driving,
stop your vehicle immediately,where it is safe to do so.
Anti-lock brakingsystem (ABS) warninglight
This comes on for a few secondseach time the ignition is switchedon. If the warning light remains on or comes on above 8 mph (12 km/h),
this indicates an ABS malfunction.
However, the vehicle retains conven- tional servo-assisted braking. Lighting of this warning light, accom- panied by an audible signal, indi-
cates an ABS fault.
Consult a PEUGEOT dealer.
Diesel engine low coolant level warninglight
Linked to the central (STOP) war-ning light.
You must stop.
Wait for the engine to cool before topping up the level. The cooling circuit is pressurised.In the event of breakdown and to prevent any risk of burns , unscrew
the cap by two turns to allow thepressure to drop. When the pressure has dropped, remove the cap and top up the level.
Consult a PEUGEOT dealer.
Central (STOP) warning light
Linked to the warning lights:
- "engine oil pressure and tempera- ture'',
- "low coolant level'',
- "handbrake'',
- "low brake fluid level'',
- "electronic brake force distribution system fault''.
Linked with the "coolant tempera-
ture" indicator.
You must stop if the light flashes with the engine running.
Consult a PEUGEOT dealer.
Engine oil pressureand temperaturewarning light
Linked to the central (STOP) war-ning light.
You must stop.
This warning light indicates one ofthe following:
- insufficient oil pressure,
- a lack of oil in the lubrication cir- cuit. Top up the level.
- an oil temperature which is too high. The warning light is acom-
panied by an audible signal. Tolower the oil temperature, reduceyour speed.
Consult a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS 29
22-12-2003

Instrument panel display After switching on the ignition, three functions are shown in succession: - service indicator (see corresponding section),- engine oil level indicator (Diesel),- total distance recorder/total and trip distances.Note:the total and trip distances are displayed for 30 seconds when the ignition
is switched off, on opening the driver's door, as well as on locking and unlocking the vehicle. Engine oil level (Diesel) When the ignition is switched on, the engine oil level is indicated for approximately 10 seconds, after the servicing information.
Maximum Note:a surplus of oil can cause damage to the
engine. Minimum Check the level with the dipstick and top it up. The level indicated is only correct if the vehiclehas been on stable, level ground, with theengine stopped, for 10 minutes. Oil level gauge fault The 6 segments flash to indicate a fault in the oil level gauge. There is a risk the engine will be damaged.
Consult a PEUGEOT dealer.
Front and side air bags warning light
The light will come on for a fewseconds when the ignition is swit-ched on. With the engine running, illumination of this warning light, accompaniedby an audible signal, indicates afault in the air bags.
Consult a PEUGEOT dealer.
Coolant temperature indicator
- needle in zone (A), the tempera-
ture is correct,
- needle in zone (B), the tempera-
ture is too high. The central STOP
warning light flashes.
You must stop.
Consult a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS 31
22-12-2003

Instrument panel display After switching on the ignition, three functions are shown in succession: - service indicator (see corresponding section),- engine oil level indicator (Diesel),- total distance recorder/total and trip distances.Note:the total and trip distances are displayed for 30 seconds when the ignition
is switched off, on opening the driver's door, as well as on locking and unlocking the vehicle. Engine oil level (Diesel) When the ignition is switched on, the engine oil level is indicated for approximately 10 seconds, after the servicing information.
Maximum Note:a surplus of oil can cause damage to the
engine. Minimum Check the level with the dipstick and top it up. The level indicated is only correct if the vehiclehas been on stable, level ground, with theengine stopped, for 10 minutes. Oil level gauge fault The 6 segments flash to indicate a fault in the oil level gauge. There is a risk the engine will be damaged.
Consult a PEUGEOT dealer.
Front and side air bags warning light
The light will come on for a fewseconds when the ignition is swit-ched on. With the engine running, illumination of this warning light, accompaniedby an audible signal, indicates afault in the air bags.
Consult a PEUGEOT dealer.
Coolant temperature indicator
- needle in zone (A), the tempera-
ture is correct,
- needle in zone (B), the tempera-
ture is too high. The central STOP
warning light flashes.
You must stop.
Consult a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS 31
22-12-2003

22-12-2003
Total distance recorder Briefly pressing button 1alternates
between the total and trip distance displays.
To reset the trip recorder to zero, when it is displayed press button 1
until zeros appear. Lighting rheostat With the lights on, press the button to vary the intensity of the lighting ofthe instruments and controls. Whenthe lighting reaches the minimum (ormaximum) setting, release the but-ton then press it again to increase(or reduce) the brightness. As soon as the lighting is of the required brightness, release the button.
INSTRUMENTS AND CONTROLS
32

MULTIFUNCTION DISPLAY This displays the following informa- tion:
- the time,
- the date,
- the audio system displays,
- a door check (e.g.: ''left front dooropen''),
- warning messages (e.g. ''remote control battery flat'') or information messages (e.g. ''eco mode
active''), displayed temporarily.
CLOCK Button
1: hour adjustment
Button 2: minute adjustment
Press and hold the button for rapid advance.
YOUR PARTNER IN DETAIL 33
22-12-2003
Adjusting the parameters Press and hold button
1for two
seconds to access the settings; the data flashes, indicating it is ready tobe modified. Then, each press of button 1scrolls
through the various data in the following order:
- language of information displayed,
- hours (12 then 24 hour mode),
- minutes,
- year,
- month,
- day. Pressing button 2alters the value of
the parameter selected. Press and hold for rapid advance (return to startafter the last possible value). After 7 seconds with no action, the main display returns; the modifieddata are now recorded.