FOR EMERGENCIES
7. Clean away any mud, etc. on the hub
surface (C), hub bolts (D) or in the in-
stallation holes (E) in the wheel, and
then mount the spare tyre.8. On the steel wheel type vehicle
(Type 1), install the wheel nuts, with
the tapered ends facing inward, then
tighten by hand until the wheel is no
longer loose.On the aluminium wheel type vehicle
(Type 2), temporarily tighten the wheel
nuts by hand until the flanges of the
wheels nuts come into contact with the
wheel to prevent backlashing the tyre.
NOTE
(1) Flange nuts (Type 2) can be tem-
porarily used on the steel wheel, but
return to the original wheel and tyre
as soon as possible.
(2) If all four wheels on vehicles with
flange nuts (Type 2) are changed to
steel wheels, use tapered nuts
(Type 1).
CAUTIONNever apply oil to either wheel bolts
or nuts as it will cause them to over-
tighten.
8-18
N24A119
Type 2
N24A171
E
CD
N24A118
Type 1
08engL2_240082_4 22-01-2004 13:10 Page 8-18
