
STARTING AND DRIVING
5-30
CAUTIONAlways use tyres of the same size,
same type, and same brand, and
which have no wear differences. Us-
ing tyres which differ in size, type,
brand or the degree of wear will in-
crease the differential oil tempera-
ture, resulting in possible damage to
the driving system.
Further, the drive train will be sub-
jected to excessive loading, possi-
bly leading to oil leakage, compo-
nent seizure, or other serious faults.
Jacking up vehicle on 4-wheel
drive vehicles
CAUTIONDo not crank the engine while jack-
ing up the vehicle.
The tyre on the ground may turn and
the vehicle may roll off the jack.
Operate clutch pedal slowly and
positively
Quick or slight clutch engagement made
while the engine is running at high speed
will cause damage to the clutch and trans-
mission because the tractive force is very
great.
Operate the pedal slowly and positively.
Parking brakeEI07A-Tb
To park the vehicle, first bring it to a com-
plete stop, fully engage the parking brake,
and then move the gearshift level to 1st
(on an uphill) or Reverse (on a downhill)
position for vehicles with a manual trans-
mission or set the selector lever to the “P”
(PARK) position on automatic transmis-
sion vehicles.
Type 1
To apply
1 - Pull the lever up without pushing the
button at the end of the hand grip.
I07A008
1
Type 1
05engL2_240082_4 22-01-2004 13:05 Page 5-30

VEHICLE CARE
PolishingEK04A-Ac
The vehicle should only be polished if the
paintwork has become stained or lost its
lustre. Matt-finish parts and plastic
bumpers must not be polished, polishing
these parts will stain them or damage their
finish.
Damaged paintEK08A-Ac
Small cracks and scratches in the paint
coat should be touched up as soon as
possible with MITSUBISHI touch-up paint
to prevent corrosion.
Check body areas facing the road or the
tyres carefully for damage to the paint coat
caused by flying stones, etc. The paint
code number for your vehicle can be
found on the vehicle information code
plate in the engine compartment.
Servicing of plastic partsEK29APDc
Use a sponge or chamois leather.
If car wax adheres to the gray or black
rough surface of the bumper or moulding,
the surface becomes white. If this hap-
pens, wipe it off using lukewarm water and
soft cloth or chamois leather.
CAUTION(1) Do not use a scrubbing brush or
other hard tools as they may
damage the plastic part surface.
(2) Do not use wax containing com-
pound (polishing powder) which
may damage the plastic part sur-
face.
(3) Do not bring the plastic parts
into contact with brake fluids,
engine oils, greases, paint thin-
ners, and sulphuric acid (battery
electrolyte) which may stain,
crack or discolour the plastic
parts.
If they touch the plastic part,
wipe them off with soft cloth,
chamois or the like and an aque-
ous solution of neutral deter-
gent, then immediately rinse the
affected parts with water.
Chrome partsEK06A-Aa
In order to prevent spots and corrosion of
chrome parts, wash with water, dry thor-
oughly, and apply a special protective
coating. This should be done more fre-
quently in winter.
Aluminium wheels*EK35A-Af
A protective coating is provided over the
aluminium type wheels.
Clean aluminium wheels with a cleaner
designed for use on aluminium and apply
an appropriate protection agent.
NOTE
(1) When cleaning aluminium type
wheels, do not use abrasive cleaners.
Wheels exposed to sea water or road
chemicals should be cleaned as soon
as possible.
(2) Brushes may damage the aluminium
wheel surface. Always use a sponge,
chamois leather, etc.
(3) Do not apply hot water directly from
the steam cleaner or similar to the
wheel surface.
7-6
07engL2_240082_4 22-01-2004 13:09 Page 7-6

FOR EMERGENCIES
H - Rear jacking point
WARNING(1) Don’t place the jack at any posi-
tion other than the one speci-
fied. If the jack is placed at a
wrong position, the body of the
vehicle could be dented or the
jack might fall over and cause
personal injury.
(2) Avoid using the jack on a slope
or on a soft surface.
Otherwise the jack might tilt and
the vehicle falls down, causing
an unexpected accident.
Always use the jack on a flat,
hard surface. Before placing the
jack, check to ensure that there
are no sand or pebbles on the
surface.
To lower the vehicle
1. Fit the notch (K) provided on the jack
handle end to the valve (J) of the jack.
2. Slowly turn the jack handle anticlock-
wise to loosen the release valve.
CAUTION(1) Turn the jack handle slowly.
Lowering the vehicle rapidly can
cause the jack to move out of
place, eventually resulting in
serious injury.
(2) If the release valve is loosened
by turning it 2 or more times in
the anticlockwise direction, oil
will leak and the jack cannot be
used.
NOTE
When jacking up the rear of the vehicle,
turn the tip of the jack so that the grooved
portion (I) properly meets the designated
point.
7. Operate the jack handle up and down,
slowly jack up the vehicle until the tyre
is slightly off the ground.
NOTE
This jack is a two-stage expansion type.
8-11
N22A120
I
N22A068
K J
N22A065
HH
08engL2_240082_4 22-01-2004 13:10 Page 8-11

FOR EMERGENCIES
7. Clean away any mud, etc. on the hub
surface (C), hub bolts (D) or in the in-
stallation holes (E) in the wheel, and
then mount the spare tyre.8. On the steel wheel type vehicle
(Type 1), install the wheel nuts, with
the tapered ends facing inward, then
tighten by hand until the wheel is no
longer loose.On the aluminium wheel type vehicle
(Type 2), temporarily tighten the wheel
nuts by hand until the flanges of the
wheels nuts come into contact with the
wheel to prevent backlashing the tyre.
NOTE
(1) Flange nuts (Type 2) can be tem-
porarily used on the steel wheel, but
return to the original wheel and tyre
as soon as possible.
(2) If all four wheels on vehicles with
flange nuts (Type 2) are changed to
steel wheels, use tapered nuts
(Type 1).
CAUTIONNever apply oil to either wheel bolts
or nuts as it will cause them to over-
tighten.
8-18
N24A119
Type 2
N24A171
E
CD
N24A118
Type 1
08engL2_240082_4 22-01-2004 13:10 Page 8-18

FOR EMERGENCIES
Replacement of lamp
bulbs
EN10A-Ab
Before replacing a bulb, ensure the lamp
is off. Do not touch the glass part of the
new bulb with your bare fingers; the skin
oil left on the glass will evaporate when
the bulb gets hot and the vapor will con-
dense on the reflector and dim the sur-
face.
Bulb capacityEN10BPXb
A bulb should only be replaced with a new
bulb of the same rating and type. The
designation can be found on the base of
the bulb.
Outside
1 - Headlamps, High/low beam
.......................................60/55W (H4)
2 - Front turn-signal lamps
...................................21W (WY21W)
3 - Position lamps ..................5W (W5W)
4 - Side turn-signal lamps....5W (WY5W)5 - Rear turn-sig-
nal lamps .....................21W (PY21W)
6 - Reversing lamps ............21W (P21W)
7 - Stop and tail lamps ..21/5W (P21/5W)
8 - Rear fog lamp* (LHD vehicles)
.......................................21W (P21W)
9 - Number plate lamps .........5W (W5W)
10 - Rear fog lamp (RHD vehicles)
.......................................21W (P21W)
11 - High mounted stop lamp*..5W (W5W)
Inside
Room lamp...........................................8W
Personal lamp*...................................10W
8-34
N10B142
1
234
N10B230
8 765
911
10
08engL2_240082_4 22-01-2004 13:11 Page 8-34

SPECIFICATIONS
Other specifications
*: Optional equipment
10-9
Item
Diesel-powered vehicles
2WD4WDWith turbochargerWithout turbocharger
Combustion type Indirect injection
Fuel injection pump Electronically controlled Mechanical Electronically controlled
Clutch Dry single disc clutch with diaphragm spring, hydraulic action
Steering system Recirculating ball type, power assisted*Recirculating ball type,
power assisted
SuspensionFront Independent type, wishbone, coil springIndependent type, wishbone,
torsion bar
Rear Rigid type, leaf spring
Service brakesType Hydraulic, front and rear splitted double circuit system with power assistance, anti-lock brake*
Front Ventilated disc brakes
Rear Drum brakes
Parking brake Parking brake acts mechanically on rear wheels
10engL2_240082_4 22-01-2004 13:14 Page 10-9

SPECIFICATIONS
Other specifications
*: Optional equipment
10-23
Item
2WD4WD
With turbochargerWithout turbochargerWith catalytic converterWithout catalytic converter
Combustion type Indirect injection
Fuel injection pumpElectronically
controlledMechanicalElectronically
controlledMechanical
Clutch Dry single disc clutch with diaphragm spring, hydraulic action
Steering system Recirculating ball type, power assisted* Recirculating ball type, power assisted
SuspensionFront Independent type, wishbone, coil spring Independent type, wishbone, torsion bar
Rear Rigid type, leaf spring
Service brakesType Hydraulic, front and rear splitted double circuit system with power assistance, anti-lock brake*
Front Ventilated disc brakes
Rear Drum brakes
Parking brake Parking brake acts mechanically on rear wheels
10engL2_240082_4 22-01-2004 13:14 Page 10-23

INDEX
4WD indication lamp
(4-wheel drive vehicles) .......................... 5-22
Accessory boxes ....................................... 6-35
Accessory (Installation) ............................. 1-13
Additional equipment ................................. 9-17
Antenna (Pillar antenna) ............................ 6-18
Anti-lock brake system (ABS) .................... 5-33
Armrest ........................................................ 3-7
Ashtray ...................................................... 6-34
Audio system
Anti-theft system ..................................... 6-15
Automatic air conditioning ......................... 6-25
Automatic transmission
Fluid .......................................................... 9-4
Possible driving speed ............................ 5-19
Selector positions.................................... 5-17
Warning lamp ............................................ 4-8
Battery ......................................................... 9-6
Charge warning lamp ................................ 4-8
Discharged battery
(Emergency starting) ............................ 8-27
Bonnet ......................................................... 2-7
Brake system
Anti-lock brake ........................................ 5-33
Braking .................................................... 5-32
Fluid .......................................................... 9-8
Parking brake .......................................... 5-30
Pedal free play ........................................ 9-14
Warning lamp ............................................ 4-9
Bulb capacity, replacement ....................... 8-34Door-ajar warning lamp ............................... 4-7
Doors ........................................................... 2-4
Central door locks ..................................... 2-7
Child protection ......................................... 2-6
Lock and unlock ........................................ 2-4
Economical driving ...................................... 5-6
Electric remote-controlled
outside rear-view mirrors ........................ 5-38
Electric window control ................................ 2-9
Electronic immobilizer.................................. 2-2
Emergency starting.................................... 8-27
Engine number .......................................... 10-2
Engine
Coolant...................................................... 9-5
Number ................................................... 10-2
Oil .............................................................. 9-2
Used oil ................................................... 1-16
Exterior and interior lamp operation .......... 9-14
Fluid
Automatic transmission fluid ..................... 9-4
Brake fluid ............................................. 10-26
Clutch fluid ..................................... 9-9, 10-26
Manual transmission fluid ..................... 10-26
Power steering fluid ....................... 9-9, 10-26
Washer fluid ............................................ 9-10
Fuel filter indication lamp ............................. 4-9
Fuel
Capacity /(Filling the fuel tank).................. 5-3
Fuel gauge ................................................ 4-3
Low fuel indication lamp............................ 4-7
Fuse load capacity..................................... 8-31
Fuses ......................................................... 8-30 Capacities ................................................ 10-25
Catalytic converter ....................................... 5-5
Cautions on handling of 4WD vehicles...... 5-29
Central door locks........................................ 2-7
Changing a fuse ........................................ 8-33
Charge warning lamp .................................. 4-8
Chassis number......................................... 10-2
“Child-protection” rear door ......................... 2-6
Child restraint ............................................ 3-11
Cigarette lighter ......................................... 6-33
Cleaning the inside of your vehicle .............. 7-2
Genuine leather ........................................ 7-3
Plastic, Vinyl leather, etc. .......................... 7-3
Cleaning the outside of your vehicle............ 7-4
Chrome parts ............................................ 7-6
Damaged paint.......................................... 7-6
Polishing ................................................... 7-6
Washing .................................................... 7-4
Waxing ...................................................... 7-5
Clock (Digital) ............................................ 6-34
Clutch
Fluid .......................................................... 9-9
Pedal free play ........................................ 9-14
Combination headlamps,
dipper and turn signal switch .................. 4-12
Coolant (Engine).......................................... 9-5
Correct 4-wheel drive operation ................ 5-26
Cup tray ..................................................... 6-37
Day/Night Type inside rear-view mirror ..... 5-37
Diesel fuel ................................................ 10-24
Diesel preheat warning lamp ..................... 4-10
Digital clock ............................................... 6-34
Dimensions ......................... 10-5, 10-11, 10-17
10-27
10engL2_240082_4 22-01-2004 13:14 Page 10-27